97+ XJ Front Bumper Removal Part 1/2 - 2000 Jeep Cherokee

  Рет қаралды 22,069

spacerag

spacerag

Күн бұрын

Complete Removal of the factory bumper from a 2000 Jeep Cherokee Sport
Watch me fumble my way, step-by-step as I remove the factory front bumper from Jeep XJ. This should apply to any Cherokee made in 1997 through 2001. Aside from how the end caps are removed, much of this also applies to earlier XJs.
Stay tuned! In future videos I'll be tidying up and relocating what's left, installing the JCR tie-in kit, and then using my worst fabrication skills to create a new bumper.
Part Two Here:
• 97+ XJ Front Bumper Re...
Subscribe and follow along!

Пікірлер: 25
@nicholasp3637
@nicholasp3637 8 жыл бұрын
Yep your right, pull the plastic back and hit them with a long extension with a wobble and ittl come right off. 99 xj just pulled it today for a winch bumper install.
@spacerag
@spacerag 8 жыл бұрын
Thats awesome. Thanks for watching. What kind of bumper are you sticking on?
@AAMarc
@AAMarc 7 жыл бұрын
i just did this and it really tested my patience.....
@spacerag
@spacerag 7 жыл бұрын
That's a jeep for ya... :)
@jem4257
@jem4257 7 жыл бұрын
Muy buen trabajo, pero una pregunta que función desempeña el contenedor que esta detrás del bomper
@spacerag
@spacerag 7 жыл бұрын
I'm sorry, I don't speak spanish, but if you're asking about that black ball, that is a vacuum canister which helps provide vacuum for accessories, etc while the engine is off. In the part 2 of this video, I show how to relocate it. I will attempt to translate this with google translate. I hope it works out. Thanks for watching! :) Lo siento, no hablo español, pero si usted está preguntando sobre esa bola negra, que es un recipiente de vacío que ayuda a proporcionar vacío para accesorios, etc, mientras que el motor está apagado. En la parte 2 de este video, muestro cómo reubicarla. Voy a intentar traducir esto con google translate. Espero que funcione. ¡Gracias por ver! :)
@Zoofactory
@Zoofactory 4 жыл бұрын
What gauge wire is being used on the horns? That’s probably common sense.. But I don’t know what to use. Thx Anyone & Everyone.
@ky0611
@ky0611 11 ай бұрын
What color us ur XJ?
@Dustin2112
@Dustin2112 7 жыл бұрын
If you still have the silver bumper, I might be interested in purchasing it from you. No joke.
@spacerag
@spacerag 7 жыл бұрын
+Dustin 2112 you mean the factory one i pulled off? I do still have it but I don't wanna deal with shipping it. If you live nearby and have a way to pick it up, it's all yours!
@zeke6461
@zeke6461 6 жыл бұрын
Thinking about taking these off to spray paint them cause theyre really faded. Is there a feasible way to get them back on after removal?
@spacerag
@spacerag 6 жыл бұрын
+Zeke Zacierka yep. They'll go back together fairly easily. It all bolts together.
@zeke6461
@zeke6461 6 жыл бұрын
spacerag hey, just came back to this video cause im finally getting around to painting them tomorrow. Just noticed you had a rancho steering stabilizer. How does that perform?
@spacerag
@spacerag 6 жыл бұрын
I've been happy with it. Seems like it has held up better than OEM stabilizers have. I talk about it a little in my video about the ZJ tie rod upgrade.
@nicholasp3637
@nicholasp3637 8 жыл бұрын
Fyi you can remove the whole bumper in one piece by removing 6 bracket bolts after disconnecting all electrical connectors and the vac line on the passenger side.
@spacerag
@spacerag 8 жыл бұрын
There are still two bolts connnecting the plastic caps to the fenders on each side. These are obscured by the rubber wheel wells. The bumper wont come off in one piece without taking those out first. With the pre-97s i think you might be correct though.
@Zoofactory
@Zoofactory 4 жыл бұрын
What is the blue 110v plug hanging down? I probably should know the answer - but I am at a loss. Anyone have a good guess?
@spacerag
@spacerag 4 жыл бұрын
Optional electric drive. Kinda sucks cuz you need a really long cord to get anywhere.
@Zoofactory
@Zoofactory 4 жыл бұрын
spacerag That’s a good one🤣🤣. Like I already didn’t feel like a big enough imbecile. I thought it was for the internal min-bar.
@spacerag
@spacerag 4 жыл бұрын
Haha! If you haven't figured it out yet, it's for my block heater. In super cold places we plug in our cars to keep the coolant warmer so they will start easier (or at all).
@Zoofactory
@Zoofactory 4 жыл бұрын
spacerag It had occurred to me, but I thought that was typically for diesels... I am a little wiser today...👌
@davidhyland3833
@davidhyland3833 6 жыл бұрын
"They light up, but they don't provide any light" - Well which is it man?!
@spacerag
@spacerag 6 жыл бұрын
Haha. Now its neither. They're long gone!
@gran0353
@gran0353 7 жыл бұрын
*falls off* lmao 3:40
@spacerag
@spacerag 7 жыл бұрын
+gran0353 sometimes things work themselves out ;)
Я сделала самое маленькое в мире мороженое!
00:43
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 23 МЛН
ROSÉ & Bruno Mars - APT. (Official Music Video)
02:54
ROSÉ
Рет қаралды 114 МЛН
Jeep Cherokee XJ Faded Bumper End Caps Solution!
28:52
KCars
Рет қаралды 3,9 М.
How to Remove Fenders
11:14
BleepinJeep
Рет қаралды 40 М.
JEEP XJ HEADER PANEL REMOVAL FOR 1997-2001 CHEROKEES
7:46
Project Dan H
Рет қаралды 36 М.
3 Hours vs. 3 Years of Blender
17:44
Isto Inc.
Рет қаралды 5 МЛН
How to Find and Cure Death Wobble Jeep XJ, ZJ, TJ, and more
12:29
martinbuilt
Рет қаралды 272 М.
How To remove a stock Jeep Cherokee Bumper
5:16
BleepinJeep
Рет қаралды 112 М.
Camping Near A Rainy Ghost Town With My Dog (Inside My Jeep XJ)
15:37
Jennings Outdoors
Рет қаралды 24 М.
Я сделала самое маленькое в мире мороженое!
00:43