99% OF PEOPLE DON'T KNOW ABOUT THIS MILWAUKEE TOOL BOX FEATURE!

99% OF PEOPLE DON'T KNOW ABOUT THIS MILWAUKEE TOOL BOX FEATURE!
Today we talk about a little known feature on Milwaukee tools shock wave bit cases and what it is actually there for. If you knew what this feature was used for let us know down in the comments section below!

[@Roblecop]

Hey Vince! I love your channel because of episodes like this. I think you should do your own version of the old, "The more you know!" thing at the end of these types of videos.

[@VCGConstruction]

We can add that!!

[@jdreynolds29]

I believe the questions asked once before on a life stream what that was for and I mentioned it was a 1/4 - 20 threaded insert for a magnet accessory that was originally offered for an m12 work light, but that they also offered a hook

[@VCGConstruction]

I believe you are correct fine sir!

[@jameslewis2102]

Thanks again for the info always good to informed on things like this

[@rowanmarriott9459]

VCG Construction 90

[@ryansco12]

This should have been a 1 minute video

[@TheBUGZNTA]

80% of this channel could be 1 minute videos however even if you wanted too you cannot do that on youtube. The algorithms that decide what content to promote on youtube will almost never recommend a video thats less than 5 minutes. Just gotta skip.

[@jimhansen5395]

But then he wouldn't have had the pleasure to hear himself talk for 7+ minutes ...

[@johnysilver1853]

No

[@carolinojed]

Your mom is a 1 minute video

[@0987__]

Exactly what I was thinking

[@lifeisgood070]

the hardest thing about those bits is taking them out of the damn box. I always feel like my finger is going to slip and get cut on an adjacent bit. I use needle nose to get them out - it's ridiculous.

[@woodcrafter7361]

agreed to both of you guys. I have the one set with drill bits, and almost diced my fingers trying to get the out. Pliers or something to wedge them from underneath is the way to go.

[@simplemanduke7128]

So true

[@musclemad16]

Lucky I'm an electrician and always have pliers handy just to pull them out

[@pharaohacura3618]

that is the truth 😂😂😂....

[@wdr8303]

lifeisgood070 idk what it’s like for all the kits but some of the bit holders flip up

[@nicgarcia7396]

They planned on attaching them to the pack out boxes, it went all the way to production on the bit boxes, but VP veto'ed it because they make the pack out organizer box, so it would have took from profits on the new pack out organizer. My uncle works for Milwaukee

[@odijamco]

Surprised this didn't get more likes. Good info lol

[@autonomous44]

Ah the old “my uncle works for” line of bullshit.

[@travis8623]

@@autonomous44 you know real people work there right? Those people have family one can assume and even friends. No need to be a D Bag your whole life

[@autonomous44]

@@travis8623 You new to the internet or something? The "my uncle works there" shit is an age old classic. Don't jerk my jive, son.

[@travis8623]

@@autonomous44 yawn

[@stefanhaustein503]

If they want to go fancy with these boxes, they should design them, so you can remove the bits with on hand. Some times I even need pliers to remove them, especially with oily hands

[@NickJPDT]

Sometimes Milwaukee thinks a little too hard... it’s a bit case

[@VCGConstruction]

I can see what you're saying!!

[@tiebear1]

I need a drink after watching this

[@VCGConstruction]

Where you been Big_A? We put your face on a milk carton last week!!

[@tiebear1]

@@VCGConstruction by the time i have been getting home the live streams have been done. But i will be back representing the 609 ... lol

[@VCGConstruction]

Yooo cuz we need the representation!! Good to hear from you! Glad you’re busy and doing well!

[@howardcohen2767]

I store my drill bits with the cutting edges in, not out. First, you never worry about cutting your fingers when putting them in or taking them out. Second, it is easier to see and compare rod sizes than imagining the rod size when looking at the sharp end. It is easier to hold a bolt up to the flat back and see if the bit is a good size. I like the carriage bolt honorable mention idea. The magnet would quickly attract sharp iron filing that would have to be removed or risk injuring skin. The other ideas are good but esoteric for my own use.

[@BannedByMe]

I never cut my finger doing that I store them normally.

[@tommypack9187]

@@BannedByMe oh man I have. When new they are hard to remove and I did it first try. Been very careful since, but I'm gonna flip em over now

[@ralphvalkenhoff2887]

Dude, you have a rare talent. Being able to talk a lot about very little. I for one envy you.

[@maxwaters1461]

You mean his a great bull shitter

[@FDWIndisch]

@@maxwaters1461he'd be a terrific political candidate; to expound virtues of 1/4"-20 female threads in a mere 7+ minutes. And who watching this couldn't MAKE a belt clip or loop to hang from belt, ladder rung, maybe ear gauge? At least they have a clue what size screw to allow for!

[@jeremygrubbs4854]

I've got 2 sets, and I put a small carabiner clip attached to short nylon webbing on each. Then I just clip them to the D rings for the shoulder strap of my main tool bag. Keeps them hanging conveniently on the side and frees up a lot of real estate inside.

[@mpetrik1]

I made my own screw-on magnet before those were available. Bought rare earth magnets at the local surplus store, with holes already in them. I also have one of the smaller boxes with a belt clip, which came from the surplus store as well. Been using these for quite sometime now. I think the kickstand idea is brilliant! Cheers, keep up the great videos.

[@rjjrrailsgscalesolenske5231]

Interesting, but your killing me with the way you say RARE EARTH MAGNET 😂😂😂😂😂 love this channel

[@VCGConstruction]

🤣🤣🤣

[@stephengreco5115]

Dude I like the meat of your vids but the intros are too long. Get to the point. Keep up the good info

[@danlo4042]

Lmao said something damn sometimes I just want them to say what video is I don’t need the “jokes” and pointless skits just show me some thing damn it not everyone got mins to waste lol

[@StrykerEcks]

I've said that before, but he doesn't listen. Now I just skip through the beginning, because I know he's going to rattle-off for a good three to five minutes.

[@robertpaige7507]

Guys. Y'all do realize that these guys are in business of gathering the largest crowd and getting the most views possible on here right? If you don't have the time to waste. Then get off of fkn youtube. It's called personality and a sense of humor. Get one

[@alexhendrixxx]

Wait what ...You like his meat ? 🤔

[@maxwaters1461]

Exactly, he can easily cut 80% of the BS out and be more productive.

[@ATLPhotography8]

For any photographers, we have Peak Design Capture Clips that can be bolted to the Milwaukee tool boxes. Then you can attach the boxes to ANY belt quickly and easily. We also have 1/4”20 neodymium magnet mounts that can hold about 10 lbs.

[@larrytheplumber9851]

Where at ?

[@andrewdrozd847]

Well, time to buy a bag of 1/4-20's, a few magnets, and some epoxy. Thank you for revealing the answer to "What the hell is this for?" My guess for why they dropped the belt clip is that someone went up a ladder and the bit box came down way before they did.

[@VCGConstruction]

Good idea, and good guess, I’m gonna ask Milwaukee why they “Dropped” the belt clip!!

[@barrettalen]

If the magnet doesn't go on sale im thanking you ahead of time for the DIY tip.

[@ToolReviewZone]

Always learning something new here bro!

[@VCGConstruction]

Thanks TRZ we appreciate it !!

[@danstheman33]

I sometimes use it to check the threads of a 1/4" bolt to confirm that it is in fact 1/4"-20 (which is what I often use with SnapToggle anchors). That's the most useful function I can think of. I've tried the kickstand thing just for fun, that could potentially be useful, but I never carry that bulky case with me anyway. I always wondered why anyone would want to attach a drill bit case to a tripod..

[@roadeomagic]

Great video, you crack me dude! I like the kickstand option also. I'm a diy'er and I was wondering what that was. Haha

[@Mickocarbomb]

Probably their tests for the belt clip was turning up multiple failures one and the most major of which I can only assume was that the nut in the case would eventually after X amount of times tear out or the latter of my two ideas was the case would open/it'd get snagged.

[@reaction9449]

My guess is to hang them on a wall in your garage or shop, peg board or a sheet of wood, whatever you can think up, everyone’s got different and good ideas 👍🏻

[@ucitymetalhead]

use a magnetic gorilapod. you could use one of those fasteners to attach a belt clip.

[@kenburns1271]

The magnet can hold fasteners and make them temporarily magnetic to stick to your tool...

[@keoniahlo]

You beat me to it!

[@davehamilton9742]

7 minutes of my life I'm never gonna get back

[@Echo903]

Johnny Doe i think its a joke. Lol

[@frescoservice5124]

Sam Cade I think Johnny doe was joking

[@RadDadisRad]

Johnny Doe you must be fun...

[@erallen97]

I've always wondered how that would attach to something. To bad the cases don't flip together like the DeWalt cases. Thanks for doing the video!

[@mjc8761]

Wow! Great information! I like the magnet use! 😊

[@VCGConstruction]

thanks MJC!!

[@makermentality1031]

Something awesome about those boxes that I found out recently is if you have an old one they will hold Bosch daredevil paddle bits perfectly

[@VCGConstruction]

Whoa sweet!!

[@joefischetti9971]

Just wondering how long it takes him to complete a home improvement project?

[@marekkrepa9982]

Celebrity's do not do home renovations so probably million years

[@Army4Runner]

Dude seems to operate in overdrive when he’s motivated and has a goal. Probably surprisingly quicker than most people out there. Not to mention he’s likely the owner of the construction company and not the one swinging a hammer anymore. Can you imagine working for someone who operates at 2x speed?

[@redsingh1990]

You could probably put a screw and lanyard to strap it to your tool belt if your working up high.

[@2get2Terrapin]

"For some of you watching this, maybe it's not ridiculous." LOL

[@hcr1248]

My honorable mention would to have something between 2 of the boxes that allowed them to be relatively stacked and connected but allowed them to fan out to allow you access to both simultaneously.

[@rayring8679]

I did build a unistrut bracket with 1/4 rod and stand off claps worked pretty good but found out it’s better to have them with me where the works at,so most of my kits made it back into my packout.great vid Vince love the intro music!!!

[@VCGConstruction]

I feel the same way as you about setting them up, I’d rather have them in my bag!! Thanks Ray!!

[@hawkie333]

That magnet is slick....slap it right on the side of the drill press!

[@HunterXray]

So slick that it will slide down other slick surfaces and fall off anyway.

[@devoncole441]

@@HunterXray he was sticking it on stainless steel

[@Dannyaudio69]

So what is that hole actually used for?

[@davekimbler2308]

My case came with 3 belt clips along with my m18 drill and 1/4 drive impact and I made my own magnet for it and made a carabiner clip and strap . The clip you had didn’t look like mine , mine looks like the one on you impact on the shelf behind you . My favorite one is the strap w/ carabiner it’ll hook onto anything !

[@SLAM6348]

I think the reason Milwaukee doesn't sell the belt clip anymore is because the nut will pull out of the case. If you look at the case, it shows the nut was pressed in from the outside instead of the inside. So when walking around with the clip on, the case would fall off & spill everything.

[@jamesnelson9482]

The toolboxes have 1/4-20 bolt holes as well so you could use a double threaded stud to attach too the tool box.

[@philjung9047]

Thread in a bolt and put the bolt through one of the screwdriver holder holes on top of your ladder so the box doesn't fall off.

[@ivanestrada3468]

I love what Milwaukee is doing. They are coming up with all kinds of ideas

[@VCGConstruction]

Many tradespeople use this feature, Milwaukee listens to their customers!!

[@billmacfukington3010]

They also fit prefect in the hard cases if you cut spots out for them in the inner liner. I have a hard case for the 1/2” drill and 1/4” impact combo, I keep my 1/2” drill in it and cut out for 4 bit cases and can still put my charger in when I need it.

[@VCGConstruction]

Nice Mac!!

[@anthonycaron2265]

There was just no reason for this to be a 7 minute video

[@spacecruisers]

Could have done this in 30 seconds or less.

[@UnknownUser435]

Couldn’t agree more man

[@GEK69NY]

Come on, it is SHOW.. Don’t like it, don’t watch it!! Simple as that..

[@robertjpercival6386]

Yes! This vid was 5-6 minutes too long. I was reading the Comments on this vid while I was watching it. About the 5 minute mark I realized I had been bamboozled! And so had everyone else. You want to make this a 7 minute vid (and be fair to your audience) you should have had a smoking hot blond in a bikini demo’ing the things you tried fitting to the Milwaukee box.

[@bobbyo.8484]

Gotta love that 10 sec. Skip function KZbin offers. Agreed too long unless you skip in order to get what you're looking for.

[@danieljulian4426]

These cases also nestle very nicely in to the back cavity of the rolling Packout box. The angles match up perfectly.

[@VCGConstruction]

Beautiful thanks for the feedback Daniel!!

[@anonymousliberty5725]

Damn thanks for that. Going out to get the magnets asap. They'll be nice to hang my boxes on the wall in my service truck. 👍

[@dicasolrac]

Wow! Thanks again Vince for enlightening us on the use of our tools and accessories!

[@VCGConstruction]

Thanks buddy we appreciate it!!

[@josephblazei1126]

It can also be used to attach to a lanyard for overhead work.

[@Adam-gn4oo]

that was what I was thing beforehe showed us th real attachments

[@SecureRepairAndSales]

I always thought it was for a tool belt clip.

[@ironman1518.]

Thank you Vince great to see you demonstrate many uses of tools we are not aware of.

[@dwebbtn8713]

Can yall do a comparison on mac tools bel 151 vs milwaukee 1/2 impact? Thanks

[@nickvandernet]

I had to check to see if this was released on April Fools. 😂😂

[@ryanwilson5936]

Now I can keep my bits on my fridge!

[@817monchis817]

That's a great addition. I can magnetize my bits now

[@wb5mgr]

A really great use for the hole in the back of that case is to take a little piece of light weight chain that you can get from the home center and screw it to the back of the case then screw the other end of it to the drill press in the shop... now the bits are always there and never float away. It's also handy in retail establishments when you want to have a demo unit and you want to secure it down somehow so it doesn't walk off

[@VCGConstruction]

Good move, thanks for the feedback!!

[@ronaldpellettier3473]

Hi Vince, you recently reviewed Milwaukee’s little red shockwave toolboxes. Any idea why the bits are so hard to get out? I’m not fond of having my fingers slipping on a drillbit trying to pull it up and out of a too tight holder, and slicing my finger open. DeWalt has a much better style. Flip up 90° and pull the tool out with no effort. I’ve resorted to putting a small stubby screwdriver in the box, and prying up from the bottom on the bit shank until it breaks free. Much savings on Band-Aids!!!!

[@Klocaine237]

Just like most people I like having my kickstand Vinny doing an awesome job keep it up

[@VCGConstruction]

yeah cuz the kickstand!!

[@johnyoho2603]

I'm wondering if the belt clip is no longer available because it wasn't a tight fit on your belt and they slipped off and fell. Hitting a co-worker with a falling object is a safety issue and they probably got tired of replacing the cases after breaking from the fall. 🤷🏻‍♂️

[@jessemorgensen8282]

I use these for my job and find that the latch can easily break. I've had 4 break the internal latch from falling a few feet and one from a grill cart tipping over on it (10-15lb rolling on table onto box also on table). May be that they found the latches too vulnerable to impact for a belt clip to be useful. Still awesome boxes though

[@stephenleepmg113]

Good job sir. I never thought of the magnet. Love the video !!!!!!

[@VCGConstruction]

Glad the video is helpful Stephen Lee!

[@carlpavey7167]

7 minutes of my life I will never get back

[@jimmyreed6051]

Annoying personality geeez

[@TomlinsTE]

8 Minutes if you check back on comments ;p

[@AridescentArt]

Carl Pavey hahahhahahhaa

[@TheUpRemix]

I have to say, “I REALLY appreciate your content and your personality, with your channel and videos!” Provides me a lot of insight into tools and systems. Thank You!!!

[@WillRoyMedia]

I'm a videographer and i use these bits all the time in my studio. In filmmaking everything revolves around a 1/4 20. I can use both the magnet and the nut in the boxes for so many things.

[@2405jfwebre]

Oh, I could use that to mount my deer trail camera to the box and set it on the ground.

[@sonnyschade1299]

Sorry VCG I am a fan of your videos but this time I have to call BS! Everyone knows 1/4x20 is the correct size and pitch for the uranium powered flux capacitor. Secretly used by your shadow organization to retrieve that sweet 80's techno sound byte for your intro.

[@VCGConstruction]

😂😂😂😂 sonny

[@Akerleyc1989]

Almost a million Views!!! That’s awesome VCG!!! LOVE YOU GUYS, Vince you told me on TTR to inbox you so I can come out to PA and feature on a TTR!!! I would totally fly for that any day of the week, but more realistic this summer

[@elviszhirzhan4459]

Just book got my first set of tool and I picked up a set of those and was wondering! Thank you! From Jersey

[@VCGConstruction]

Thanks Elvis!!

[@walterb299]

Now I got to get a tripod for work.

[@wootexclusive8499]

The main reason they have the super duper secret 1/4 20 nut is because guys have waisted miles of good 3m electrical tape, hiding the helpers tools in the ceiling... So Milwaukee said *Voila* ... screw the box right to some all thread! The kid freaks out, everyone laughs and the boss is very happy because only time was wasted... no tape!

[@VCGConstruction]

🤣🤣

[@jasons7044]

IBEW local?

[@jmwarden1]

Hey Vince I just bought two of those tool boxes and neither have the 1/4-20 inserts, what's up with that? Also it takes a pair of pliers to pry out the hex inserts.

[@jdreynolds29]

Yep I knew it talkin about the 1/4 - 20 thread insert. originally that was an accessory for a magnet on an M12 work light and they also offer hooks

[@VCGConstruction]

We couldn’t find any hooks!!

[@nbrowser]

Oddly as a mechanic...that magnet on the bit case...helps keep the case stay put under the hood of a car while your working on it. I've known about it for years actually!

[@VCGConstruction]

Awesome Kenneth!!

[@John...44...]

You do much drilling on an engine like??

[@Svendrys]

he drill a oil sump when he change oil ;)

[@myRefuge3710]

"Is this real stainless steel? NO!" (Surprized laugh).... LMAO! Oh man. Nice video though. Thanks

[@jameslarson7452]

Nautilus20 there’s plenty of SS grades that hold 🧲’s...

[@Alpatriod]

Best bit boxes out there ran one over with a scissor lift one time and it survived with little injury

[@mackjones7688]

Omg... I need some of these cases so I can put my drill bit collections on display for guests!

[@ibrazeau3044]

Yah, I use the magnet exactly for that purpose... great for up high work! Thanks for the video Vince

[@VCGConstruction]

What kind of work do you do?

[@stephenleepmg113]

Good job sir. Love the video. I never those of the magnet. Lol !!!!!!

[@ibrazeau3044]

VCG Construction GC/Project Lead (Director of Operations and Technical Services) for a large multi-res building owning pension fund. I lead crews for renos/turns/construction and take care of asset problems and all procurements. A foot soldier with some influence ;) but I still wear the apron on the go.

[@VCGConstruction]

A good leader will always lead the charge I Brazeau !!

[@VCGConstruction]

Thanks Stephen Lee!

[@exoticreptileranch]

You are right I didn't know that, I went into this video saying yes I know lol

[@toolswithtim2019]

The threaded insert on the Milwaukee cases are nice- I threaded some cheap magnets in them and stick them o thr side of my rolling tech cart

[@gregblau8082]

I never even thought about what it was for but when you started the video I immediately thought of taking the belt clip off the drill. I have to admit I tried putting the drill on my belt and it's just not practical.

[@kelleybruce44]

Id rather have my drill cliped to my belt... A drill falling from a ladder is much more thant 10.99 that these bits cases start at... I speak from exp.

[@davidr2515]

I use the belt clip to hang a drill on my pant pocket if i'm just putting in a couple screws and dont have a tool belt on. If I'm really working and have my tool belt on, I actually find the best place for the belt clip is to hang the drill in my hammer loop. I also find the belt clip handy to hang drills in the part or a step ladder that connects the 2 legs. But yeah, never actually use a belt clip on a belt. Ryobi used to make a drill bit set storage rack called the "dock it". The mikwaukee sets look like they should fit, but dont. I really wish Milwauke would come out with something similar because my problem isn't what to do with the sets when I'm using them. It's how to store them nicely when I'm done. I probably have at least 10 of these mikwaukee boxes.

[@WEALRO]

That intro music 🤣 was it in Scarface. Another good video Vince👍

[@VCGConstruction]

You da man Wealro!!

[@petewoodfine2100]

Hi Vince. Thanks for the heads up. I would never have guessed.

[@VCGConstruction]

Thanks Pete, we’re trying to let people know about some of the smaller features built in to their tools to make them more productive!!

[@suzesiviter6083]

This is why I like milwaukee, they innovate.

[@MoparGuy1625]

Lmao I KNEW you were a Philly boy once I heard ya said “tawlking”. Right across the river from ya in Camden county!!

[@dannymohaupt3675]

Lol I was going to ask you to do a video on this after you did the video on the dewalt tip

[@VCGConstruction]

If you have any other ideas danny leave them in the comments section cuz, we'll do it!

[@shanejohnson800]

Great channel man as soon as I saw the nut I thought the tripod also! Lol

[@VCGConstruction]

I’m a fan of the kickstand!!

[@jayrob7418]

Lol I enjoy watching this channel 😂. VCG krew!!!!

[@kylesalva2627]

Always wondered what that was for but I’d never use those attachments lol

[@VCGConstruction]

Me neither, Now i'm trying to think of other ways to use the nut adapter!!😂😂

[@kylesalva2627]

VCG Construction a few days later I still got no ideas.... this is going to haunt my Milwaukee’s every time I use them

[@VCGConstruction]

🤣🤣

[@Metzger23]

I like that magnetic attachment with the box. The DeWalt boxes don't have that option. 50k soon guys!

[@VCGConstruction]

You da man Kevin!

[@edwardmartinez4596]

The gorilla mount on a scaffold is genius!!!! Can’t tell you how many times I have my Milwaukee box flipping back and forth from screw tip to 5/8 drill bit.

[@Hohmies86]

Ok now I want to be able to attach the gorilla pod to some other work related items🧐🧐

[@colocker18]

Dude acts like he just discovered buttered toast... Please don't do a 7 minute video on that either.

[@Ratchman_5000]

Stop by next week to discover how magnets work.

[@TerryWalsdorf]

7 minutes and 30 seconds of it was essentially “no shit”

[@onetongwa]

Belt clip case, or magnet attachment might come in handy.

[@LegendMuscle]

Belt clip is a good idea

[@Mrmhibbert]

I always just use the thread in the case for sticking them on a peg board. I have always found the shockwave stuff longer lasting than Dewalt and Irwin

[@VCGConstruction]

Thanks for the feedback Martin, we appreciate it!!

[@electricalron]

Been watching for awhile. Subscribed. Nice to know about that Makita case hidden storage. Def never knew that. I'm an electrician almost 30 years now. Point Pleasant NJ over here,

[@VCGConstruction]

Yoo buddy we're practically neighbors!! Thanks we appreciate it!!

[@drue2283]

👍👍 I just subscribed , why ? cause you told me to !

[@MrDINODINO74]

... I put on my box a belt clip from Makita because the rest don't have a bigger hole, I have to cut a slot in to the box but was worth it .

[@toolologist6274]

Love the channel Vince. Videos like this are info that other tool channels just don't provide. I predict 500,000 subs a year from now. I've owned most cordless brands, currently rocking the Ridgid line with a few Milwaukee 12V thrown in.

[@VCGConstruction]

Wow Doug thank you so much we really appreciate the kind words! it's hard to beat the LSA of the Ridgid!! Ilove my M12 tools!

[@themountofoliveschannelwit7009]

very interesting. I had never even noticed that screw hole on my shock-wave cases before.

[@VCGConstruction]

Yeah I noticed the bolt a few months back and wondered what it’s for ever since!!

[@BigInjun05]

Also 99% of people dont know that you can slap industrial velcro to the box and mount it directly to your impact case or drill case like I have on my hitatchi triple hammer.

[@anibalbetancourt9150]

Muy bien 😱😱Saludos desde tampico tamaulipas México

[@VCGConstruction]

Muchas gracias apreciamos que mi amigo! Bienvenido a la #VeryCoolGang!

[@meade6291]

Also when the box is opened the gap in the middle is there for your fingers to have a secure hold w/o dropping them

[@FOXRANGERTAILS]

New guy here , just want to say I'm learning a lot thinking of switching careers to electrician, I have IT and heavy mechanic also infantry and cybersecurity experience , but holy cow I like Milwaukee, and my sthils and thanks for information brother , my brother and I are finishing basment on your tips with dry wall , you tube needs more Vince !

[@VCGConstruction]

Thanks Smokey!

[@feltonfolder420]

I've never ever ever in all my years of working with tools seen a guy walking around with his bit box on his belt... the reason they don't sell the clip is because they know its a dum idea but they put it on because "the more features the better"!! Also i do believe the bit holders rotate so...um...why the stand idea in the back? The video is meh but in the end its just a bit box fantasy and probably slightly more expensive bit box that you can get for a cheaper price from dewalt or ryobi for the same quality.

[@carlspackler91]

DeWalt? Cheaper? Yeah, because that's what their junk is known for LOL Ryobi??? Why are they even being mentioned in the same conversation? My kid is 7 with his own tool box, and even he knows better than to use Ryobi. HAHAHAHAHAHAHAHAHA DeWalt and Ryobi he says, damn youngins....

[@feltonfolder420]

@@carlspackler91 Carl Spackler Carl Spackler Carl Spackler Mr. Spackler i respect your opinion very much but i do believe a lesson is in order. The dewalt bit and the ryobi bit are likely manufactured in the same factory and branded in the same factory then shipped to dewalt and ryobi for packaging. As for the molded piece of plastic called the bit box or (whatever you call your bit box). I don't give a flying lump of **** what its features are do they hold the bits yes! Does a ryobi bit box hold my bits? Yes, does my dewalt bit box hold my bits? Yes, there the same. Also your kid has a tools at age 7 wow you must be rich and not making sure your kids not looking at tool porn at night because thats bad at his age you know! I got my first tool at age 10 and it was a handy down form my dad as a reward for helping him build the deck that still stands there to this day (20 nearly years later) (the tool was a square). Now the reason i mentioned dewalt and ryobi was because it applies to two types of people the "homeowner" who couldn't give a dam about it as long as it gets the job done and then you have contractor/real man (maybe) buy the most expensive brand of tools because there the best!! Ryobi being a "homeowners" brand just need it to work so yes it will be of a lower quality and this lower price. Dewalt on the other hand (mostly) is ment for the workplace so its more powerful, built better, and will last longer thus being more expensive and better held in regard. And ryobi is not the shity brand of handheld battery powered tools that title goes to mastercraft in my books. I have my intelligent reasons for saying the things i say and would rather not be insulted by being called a "damn youngins" when it is very obvious that you good man still have much to learn. Respectively Mr. Pearson Cheers from Canada.

[@carlspackler91]

@@feltonfolder420 Well YOU, my good man, need to take it easy and learn to recognize satire when you see it. Rich? Hardly. I work for my money. My kid has hand me down tools as well, that's why there's basically Klein, Estwing and Milwaukee in his stash because he gets MY hand me downs. I switched from DeWalt to Milwaukee 8 years ago and haven't regretted my decision once. I was sick and tired of always having to charge my batteries on the jobsite. Ironically, I just finished some work, begrudgingly with a DeWalt angle grinder because it's what they bought for the shop. Even with 2 like new 20v lithium ion batteries fully charged when I started, 4 short cuts into some aluminum/ mild steel proved to be too much for the mighty DeWalt grinder. They never fail to prove my point. DeWalt should be your first choice, if you don't like your money and you like stopping in the middle of a job to look for more suitable tools. I do agree with your point, that for someone who is an interior decorator hanging some fabulous pieces of art inside a home with 1/2" sheetrock and they don't want to risk injuring their weak little wrist, Ryobi is the perfect choice. Take it easy over there, you'll live longer. You old fart. HAHAHAHAHAHAHAHAHA

[@feltonfolder420]

@@carlspackler91 Carl Spackler Mr. Spackler you bring up good points, but im confused as to why your shop bought a battery powered angel grinder?? Unless your doing very light work (wire brush/light grinding kinda work) thats poor knowledge of tool use i feel bad for that angle grinder you should always be using a corded tool when cutting metal. I think you need to have a word with your quartermaster about the proper tools.

[@carlspackler91]

@@feltonfolder420 You're right, but I've found that discussion to be futile at best on many occasions. Hence the reason I brought the corded Milwaukee out of my own stash in my truck.

[@jeffparker360]

That’s pretty funky!

[@VCGConstruction]

i know right!! You think you'll use the feature now Jeff?

[@jeffparker360]

VCG Construction it would come in handy when I have a vehicle up on my lift in my garage.

[@VCGConstruction]

Yup attach right to the undercarriage!!

[@Pippinm7]

What is the “drill bit” clamp 🗜 on the right side of Milwaukee impact drivers and drills? Bc they don’t hold any Milwaukee drill bits, but it appears it is for drill bits-“the clamp” seems too big for drill bit. Please advise. I have one impact driver and two drills with this. Thanks!-Mike

[@Jenuin]

Sweet. Always wondered. Now my life is complete. Thanks. 👍