99% OF PEOPLE DON'T KNOW WHAT THIS DeWALT TOOL ACCESSORY DOES!

[@zee3381]

That's why we watch your vids...you're honest...and you admit you didn't read the instructions like the most of us..! 👏

[@VCGConstruction]

You da man Zee we appreciate you!!

[@andycrossland7328]

Why do we never see you pull the bit lock chuck on the impact driver? It is like you do not know that it is there. The short bits will lock in if you use it. It is the collar that is around the bit where you insert it.You pull it away from the motor, the bit slides in a bit and you release the collar and it locks the bit in place.

[@donsmith3167]

cant believe he's been using a impact driver for HOW LONG and didn't know the long bits Lock in if you pull the ring out???

[@jasonviper8512]

@@VCGConstruction "i never slow down to read it" just like you do clickbait thumbnails. now go tie that magnet on to your hard drive please :)

[@shinigamilee5915]

Me too. I'm an engineer and I never used it. So the lesson here is RT#M 😂😂😁

[@skipwashere]

Magnetic screw holder and work like a depth stop so u don't over set on drywall

[@xforty6n2x47]

And any finisher would take that away from you and trash it. Buy a screw gun

[@kylealexander7024]

Theres plenty of depth setters for drywall

[@pdubzpyro]

@@kylealexander7024 lol... never heard of “just in case”? Don’t act like you’ve never forgotten something n didn’t wanna drive. It

[@kylealexander7024]

@@pdubzpyro ever heard of a work bag? I call mine the bag of tricks and it always has anything i might need for a remodel in said bag. Not to mention theres a job trailer on site everywhere with everything else. So no i dont have the "just in case" a lot.

[@ianmyers3248]

I do drywall for a living it doesn't set the depth

[@andrewzabinski2205]

Learned something new. Thank you and appreciate the honesty. 8 minutes to get to the answer.

[@davidhamilton163]

One of my favorite little finds after getting the bit set. It has come in handy many times.

[@VCGConstruction]

It is awesome David!

[@edjohansen4231]

HONESTLY....I HAD NO IDEA !! Now that I know what it's does. I'll be using it from now on !! THANKS FOR FIGURING IT OUT AND MAKING THE VIDEO

[@VCGConstruction]

Glad you liked it

[@MaryOKC]

For Christmas 2020 I bought myself a bunch of DeWalt battery operated tools.... well I have to say, I am still watching KZbin videos to figure out how useful my tools and accessories are and now (!) I can use all my bits thanks to your video. Thanks you!

[@1985irighti]

I use one on a daily basis. I install windows and I use a 6 inch Phillips bit and 2 inch drywall screws. The sliding magnet piece is awesome for installing.

[@mikeymyke]

Congrats you are the 1%!

[@_P0tat07_]

The thing I like most about the black Dewalt bit holders is the sleeve rotates around the bit holder so you can support it with your fingers without burning your fingertips on spinning metal.

[@VCGConstruction]

I know it’s one of my favorite drives!!

[@idonotcarenow]

13 minutes, and you still don’t understand the true value of that piece. Not only does it turn ur longer bits magnetic, it also stops ur knucklehead from punching through drywall and plywood, it creates the perfect depth for ur screw, now you know.

[@davidsphone8449]

Thank You for your talent and time. The biggest surprise for me is you didn't have 40 affiliate links. I'm glad this was not a Dewalt advertisement.

[@VCGConstruction]

Welcome to the 1% David!!

[@ericcatalan9974]

For the longest time I never knew what that little yellow weird tool was used for and now I know. And to be honest I'll probably won't stop using it it's super helpful works great. Thanks man. 👍

[@timsimmons9042]

I bought the same kits last year with the fastener dummy head demo. Thought it was self explanatory to fit on the longer driver bits to work with fasteners with heads that won’t fit into the sleeve. Goes back to that wise older gent who told you that sometimes slower is faster or n this case applying it to taking the time to learn something new. Awesome vids, Vince and kudos to all the VCG gang on what you all share. Stay safe all.

[@VCGConstruction]

You’re a beast tim Simmons!!

[@jamessmith5535]

Im glad I'm not the only one who didnt know what it was for .I think ill start reading the directions. Thanks for doing this video

[@VCGConstruction]

No problem James and welcome to the 1% !

[@MrWisdom79]

I didn't know either and unfortunately I think mine is long gone now. Good excuse to go buy another set of bits😉😉😉

[@JamesInAWeek]

"Bet you don't know what this accessory is..." Now just sit through 8 and a half minutes of video with me talking about the stuff you do know about until I tell you" 😂

[@albertkelly7129]

yeah absolute dickhead

[@andrewcourt5156]

Gee to think I watched this video when I could be using my time better, like I have some paint that I must watch dry. Just another yank who loves the sound of his own voice.. and 8 and a half minutes of it !!!

[@trickyricky12147]

@@andrewcourt5156 Agreed. Never shuts his pie hole.

[@caseytbss]

Easiest way to NOT GET subscribers? This fucking video right here!

[@jameszepnick9206]

YES, HE IS AN IDIOT !!!!!

[@mikethompson7406]

I'm here because I looked on Home Depots website for what's included with the bit set I bought 10 years ago and then did a Google search for "what is a magnetic screw lock sleeve" You were the second video returned in the search results. Glad I made it back here!

[@michaelolivarez8056]

Just got a set of these impact bits and your video helped me out thanks!

[@mattgreen9323]

I have always wondered what the thing was for and I couldn't ever figure it out thanks imma use mine tomorrow now and try it thanks

[@VCGConstruction]

You got it Matt!!

[@deibert1]

Makita has had a simular setup for several years. Its a nice addition because you are capturing the screw at the head instead of trapping it in a sleeve.

[@MrShinta786]

I'm the kind of guy who loves to read the user manual and packaging before I start working with a tool

[@VCGConstruction]

I hear ya, most times if the camera isn’t on its rush rush rush!!

[@operator8014]

You can't read the manual!!! That's cheat'n!

[@MrShinta786]

@@operator8014 It was sarcasm :-p

[@leochan7572]

Love the sense of humor and honesty. Thanks!

[@Jawn009]

I just bought the same Dewalt bit set online and baffled what the sliding sleeve was for. My friends here in Philippines also don't know what the sleeve is for and heaven sent you and recommended you in my KZbin watch search bar. Here, take my subscription sir thanks a lot

[@WEALRO]

Vince I don't buy DeWalt kits , I buy DeWalt bits in the bulk package for bits , so never had one of those -BUT I do have fastcaps magnetic sleeve and use it on all my driver's , good job 👍

[@Trying_to_find_reality]

So I’ve found another great use for the sleeve, when installing door knobs you slide it up to protect the door knob when putting in the two main screws, it’s amazing!!!!!

[@joshdunnet4084]

Man thats great i was putting in nobs at work the other day and scratched it thanks

[@gillgetter3004]

Hey I wondered what it was too, till I read it. Really handy especially with long bits on butt hinge screws.

[@katherinelangford981]

Just got my first impact driver and bit set (both brushless Dewalt) and it had this. This explains it all. Thanks.

[@lgmj1810]

I used it the very day I got it in a kit and never stopped using it. I loved so much I ten of them. The freakin best drill/driver tool accessory ever made. By the way your vids are top notch for tool freaks.

[@tomkennish3630]

Yeah they’re cool. I’m a bit of a magnet connoisseur I’m obsessed with them and use them for all kinds of stuff especially tool related. I have tried every magnetic sleeve I can find for my impact and other drills, these dewalts do break on me sometimes. In my opinion the Makita magnet saddle sleeve is the best. It slides over any 1/4 hex, not proprietary like the DEWALT and to me it feels at least 3 times as magnetic. Oh and they are available separately to buy alone (I don’t think you can buy the dewalt by itself but I might be wrong?) Good video, entertaining you crack me up bro

[@VCGConstruction]

Thanks TK !!

[@CorvetteTrev]

Watch project farm on bit holders. I just bought 20 of them 10x 3/8 and 10x 1/2" for sockets, but he does the showdown for bit holders. I'll let you see it...

[@carterfest]

Dude this is life changing. At last I may actually look like I know what I'm doing on a job site. But probably not.

[@richardwang474]

Don't worry bro, I'm there with you.

[@WesleyJolly]

Its a saddle magnet for the 2" bits to make them magnetic

[@ivtec845]

Yes

[@shotintel]

Yup....

[@Frank-sy3li]

Thank you Vince. I did not know what that piece was used for. Thank you!

[@billybeavers6203]

I love that your honest.i only new because I like you saw it but I took a few minutes a fig it out..I love it..I installed a deck around a pool and it helped tremendously..

[@joelstanley993]

Long bits are great for installing shelf brackets.

[@jamescaldwell2095]

I didn't realize this wasn't known. I got curious when it came with my first kit and started tinkering. I loved it from the get go.

[@DaddyBear3000]

You missed another key feature of the sleeve. It is gauged to set drywall screws at the perfect depth.

[@Will-zn7zs]

The sleeve will over drive your screw and break the paper then there is nothing truly holding your rock

[@jordanadams5902]

@@Will-zn7zs if you're an idiot that keeps driving your screw

[@firefox6664]

Love the counter sink! Best little bit accessory for fencing and decking!

[@joshdunnet4084]

Deck and fencing thats alot of screwing why not a air gun just a question

[@semo5515]

I bought that 7 months ago and when I bought it I used it for three months straight and it's just an amazing magnet that you can and it will hold ur screw straight and u can push it and hold it tight and it will help u to not miss the screw or it slipes/slides. :) I hope I did well at explaining.

[@lukeclifton4392]

Yeah, it’s a screw holder... handy as! (Really surprised most people have no idea that’s what it’s for)

[@Kingofcarnige]

I think most people do know. If you look at or read the packaging at all it's pretty clear.

[@betocarranza6306]

Been knowing those since I started building. My supervisor at the time gave me one and I was so thankful. I always use it makes life easy.

[@VCGConstruction]

Nice beto

[@SandmanUSAFA]

I always used that specifically for DRYWALL. It allows you to quickly snap on a std drywall screw to hold it magnetic, then you rip it in fast into the drywall with a perfect sink into the wallboard, and the drill just auto-magically pops right off once the screw is counter-sunk just enough. Now it's ready for mudding.

[@ninjabothandyman6063]

I've been a handyman for 12 years and I haven't got the foggiest... Oh hell I've got like 4 of those sleeves, plus those long bits ! Thanks for sharing this video kind sir, you have just made my life easier

[@VCGConstruction]

Thanks Ninja welcome to the 1% !

[@powertoolexpert8579]

Excellent video! Very explaining the various features of the table saw.

[@jonflaker538]

It holds the screw from wobbling off. I'm a drywaller and when I am hanging rc1 channel to the ceiling it holds the screw long enough to penetrate the metal

[@VCGConstruction]

Sweet cuz!!

[@ethanmacdonald4080]

Dewalt vs Milwaukee drill bit case testing, which is stronger?

[@matthewbeaver5026]

This is exactly what I want to know

[@sanders341]

Yes it's a magnetic screw holder that stops driving the screw as soon as its counter sunk. Its awesome.

[@bensmithdecorating9065]

Awesome, explains so much cheers vince

[@panhandletrains]

Just bought one - thanks for the tutorial! 🔨😎 👍

[@Sweatsox8]

It’s a magnet! Don’t know why that took 13 mins to explain something that takes literally 2 secs and a simple demonstration. Wow🤦🏻‍♂️

[@greendilldoz71]

Shut yo mouth

[@AntDiesel54]

I've been using a Makita one for a couple years now, that always comes in there bit kit . It's called the Mag sleeve . If your running the same screws all day with same head it really does help ALOT .

[@JO-ly3hi]

*their, *you're, * a lot

[@zave0123]

Its a magnetic tip to reduce wobbling and increase magnetization. Inerchangable tips.

[@ray01ification]

Thank you for your helpful video. Awesome job !

[@VCGConstruction]

You got it! Thank you!

[@JoeyVegas63]

Am aspiring DIYer thanks you! Great explanation!!!🎉💥🎊

[@joshneill6057]

Milwaukee shockwave bits W/ dewalt magnetic sleeve = Love

[@randallmeredith9987]

It holds and picks up screws and also keeps you from setting the screw to far

[@sko547]

LMAO! I've thrown away so many of those things. Thanks!

[@Merlock_Holmes]

I just bought this bit kit and I had no idea. Thanks for the explanation man.

[@Billbread7522]

Couldn' figure it out without your help! Kudos.

[@VCGConstruction]

Welcome to the 1 %

[@crmcbrideww]

It's a magnetic sleeve to hold your screws.

[@VCGConstruction]

You are correct welcome to the 1% !

[@warrenmccarty256]

Not only magnetic it also has adjustable depth

[@oogiemaster]

it's magnetic, however, it is actually a drywall bit so the screw won't sink in too much in the drywall when screwing.

[@Devolont]

That sounds a lot more like a side benefit there bud. It's magnetic and also so it can be used with the torques bit screws. Not necessarily just a counter sink tool.

[@KevinJohnson-mv6qf]

I just found this channel and I gotta say ... I love it.

[@davereed6612]

I didn’t know and I’m glad I watched this cause I just bought a dewalt bit set this weekend and was looking at that thing wondering “wtf” it came in my set already in a 2” bit and it’s a nice thick stainless steel looking sleeve. I didn’t know it slid off the bit it was on. Thanks for this video.

[@curtboo7967]

Slides over your DeWalt bit to hold screws

[@exceleratorjoshua]

Looks just like the Makita magnetizer. The Makita magnetizer works really well. I just magnetize my bits and haven't bought a kit that has one of those

[@VCGConstruction]

I’d say it similar

[@chrismetz2240]

Makita makes the same sleeve and has for a while.

[@GPayne5089]

Irwin's impact set has those in there too

[@setrux7]

Thank you man! I was driving crazy with that little tool! I didn't know for what exactly it was. The video was a little long but it was helpful, thank you!

[@johnnycastillo2920]

Thanks man , very helpful, I dig all your videos.

[@natebice7375]

It magnetized your bits

[@VCGConstruction]

You’re part of the 1% !!

[@chillywilly6775]

I still remember the commercial when they first invented them lol

[@CESARRAMIREZ-sn8tv]

They also make those for screwdrivers !

[@WorkSmart4U]

I love Dewalt tools accessorys.

[@incomparable1705]

God blesa brotha. U hav no idea how much u helped me out wrk doing this vid Thank you.

[@VCGConstruction]

Thanks Cuz!!

[@dsdragoon]

I use it all the time.

[@peteralberti5889]

You slide it on the tip of a 2 or greater bit and that the screw will strive to the magnet

[@VCGConstruction]

How long have you been a part of the 1% Cuz?

[@georgedennison3338]

I haven't bought a new bit set in a while, so I hadn't seen the 10x magnetic sleeve, but I like it. I prefer to use the 3" bits because they fit impact ¼" hex quick release chucks, plus adding a quick release hex chuck to a drill speeds up changing bits much faster. Regarding the use of screw holding sleeves in an impact driver, if you take a close look at sleeves, they are aluminum. Repeated use in an impact WILL kill them; beats the aluminum to pieces. The only 1" bit holders I been able to use with impacts without destrying them, are sleeveless, all steel holders. I don't recall ever seeing a steel bit holder with a sleeve, but I have a handful of them, so I'd have to take a look to be certain there are no steel sleeved holders. A suggestion, if you are in a similar situation. When you first started taking about the 10X mag sleeve, you were moving it around so much, I had no idea what you were talking about. This was compounded by me not being familiar with the 10X mag sleeve. I guess you haven't learned a lesson from being in too much of a hurry to learn the purpose of the 10X mag sleeve! LOL Slow down, a half step, and make sure you get a good framed image of whatever you want your viewers to see. (Helpful 'Pro' Tip: Always helps facilitate good communication, if viewers know WHAT you are talking about!) I've had ADD my entire life; I'm an expert on slowing down to facilitate communication. LOL... Thanks for the vid, and the work they take.

[@VCGConstruction]

Thanks George I appreciate the helpful feedback !!

[@rodgyv9790]

I appreciated this video @VCG Construction..your an entertaining dude..👍

[@leithman]

So helpfull. Explained everything I needed to know and had not quite worked out.

[@samuelt2072]

I knew what it was because (duh..!) I read the instructions. Just another doodad to fumble for in tool belt full of crap... and then drop it in the sand from the top of a thirty foot ladder.

[@mdevidograndpacificlumbera1539]

Bahahahaha, this made me laugh. Too true

[@samuelt2072]

@@mdevidograndpacificlumbera1539 Doesn't matter what the occupation is there's an endless array of things to help do your job - and get you to part with your money.

[@mikee9568]

“I couldn’t figure it out, even though there is a description AND a picture on the front of the package” - I feel bad for anyone who hired this guy as a contractor!!!!!! Holy 💩!!!!

[@santosgalan6738]

Mike E I was thinking the same thing. After watching his video, I would never hire him.

[@frankgrimes6771]

I never took the time to figure out that plastic piece either

[@litebread100]

Magnetic screw holder works great but not very durable

[@osocarpinterocruz6519]

Holy sh... that wonderful accessory it´s being sitting in my kit box for about 2 years now... yesterday installing a drawer could have been a life saver! thanks for the tip. I might replicate this in spanish so they know what it is for. Greetings from Guadalajara, Jalisco. México

[@ginobambino8596]

Just ordered another one. It’s amazing.

[@justinRoo88]

Mine came with the magnetic attachment on a #2 bit. Milwaukee has the same thing. It didn't take long at all to figure it out. Long bits have a purpose like installing a screen door pump or hand rail short ones don't work well cause the drill body gets in the way. Door handles too.

[@farikomike524]

You could do a video about a rock you found on the ground and I would still watch it 👍

[@jordanbass3210]

I've been cracking up watching this video I've been using these for over 3 years. Makita made this first and DeWalt copied it. Makita design is definitely better though

[@ozamatazbuckshank6080]

Holy cow. I'm hooking up stuff in my garage right now and just used that magnetic bit. Game changer.

[@jman1057]

I love this guys enthusiasm, he cracks me up, and I love those magnetic bit holders, the yellow Dewalt and the blue Mikita's are great! .

[@rodneyhoneyman1467]

I had to like the fact you admitted you didn't know what it was for!! good on ya.

[@joeychgo]

This video reminds me why I dont subscribe to your channel

[@ironbomb6753]

LMAO🤣🤣🤣👍

[@CaptAwesome400]

joeychgo agreed

[@tomdeubel6359]

Slid over magnet. Use that thing every single day

[@Soda480Place]

Just awesome man, you deserve 1M + subscribers

[@VCGConstruction]

Thanks Emilio!!

[@djwoske]

thanks. i just bought one and this told me what it was

[@Plumpplumberbalding]

Makita makes the best mag screw holder. Dewalt doesn't compare. And I'm a Dewalt fan. But that Makita is just beefier and will run thousands of screws. Yeah, I tried the Dewalt when I got it, but the proof is right there when you're running in screws on a flooring job. The magnet on the Makita is much stronger. It sets the screw head just right. Funny thing is I don't really care for the Makita set, as the Dewalt sets are straight up better. But I'll order the Makita bit holder from Amazon.

[@VCGConstruction]

I like the Makita magnetizer as well!!

[@AGfrom83]

It's a sleeve to magnetize bits. I mean. Seriously???

[@keithnirdlinger6831]

Them dewalt sleeves always break. I have a brushless dewalt combo kit. But I find that Milwaukee bits are way better then dewalt.

[@Hammerjockeyrepair]

@SupaTrending Daily that that tools only purpose is to pull out and hold the screw in and retract as the screw threads. They only last through 1 box of screws before they jam up. They stop spinning when theyre on wood just as if you were holding it. I gave up on them

[@betwixtthewaters3700]

I don' own a DeWalt drive kit but I do own a Makita drive set. They take the guess work out of the kit by adding a 17 x magnetic boost to a double ended power bit and then shows a picture on how to adapt it..Since I have a lithium Makita drill I went with the set It also works well with my Milwaukee impact drill for long or short bits

[@waynebermoy3342]

Vince your the best teaching everything we need to know!!!!

[@VCGConstruction]

Thanks Wayne, I appreciate it!!

[@10feethighermaga12]

Only at VCG can you turn a 60 second video into a 13 minute video, and still be exciting!

[@VCGConstruction]

Thanks Cuz, good thing I don’t have snap

[@seanwinston8338]

Disagree....13 minute video was waaaayyyy to long...lost my interest very quick...

[@seanwinston8338]

@@jonking7345 not exciting at all

[@PortersMob]

More like it could have been a 20 second video, " This is a magnetic sleeve attachment for 2+inch dewalt bits" Is all the video needed. 90% of the rest of the video was "I'm an idiot who doesn't pay attention to what I'm buying" these are the same people who buy something, get home, and turn around back to the store/company and complain what they bought wasn't what they thought it was.

[@briandjordjevic9969]

I didn’t know what it was for until I seen someone using it 😂

[@MysterianX]

You could call this gadget... MAGNificent

[@VCGConstruction]

😂😂👍

[@VCGConstruction]

🤣🤣🤣 nice!!

[@ametalman66]

Thank you for the video. I had no idea how to use this piece in my bit kit.