992 Cargraphic Valve Control Unit (Features / Install / Sounds)

We showcase the Cargraphic Valve Control Unit available for the 992 Carrera, Turbo and GT3. This controller enables full control open (100%) or close of the factory valve actuators, where the factory PSE fails. Compatible with all OEM exhausts or aftermarket systems running the factory valve actuators.
*Cargraphic Valve Control Unit (992)*
flat6motorsports.com/products...

[@AdamIsAdam]

BEST VIDEO yet showing not only the install, but just how much the OEM PSE valve closes as you take off at low RPM vs keeping it open with Cargraphic. THANKS for such a great video and solution. Mount ordered.

[@berniedmd1901]

Just bought one !!! I thought with my GIAC custom Tune my valves would be open 100% when I actuate it on the dash. But your right, its only open 20% at idle even at open on my dash. Well, from the simplicity of plug and play, and programing it to my dash I'm looking forward to putting it in and hearing the difference.

[@head911]

I did it on my 992 Turbo S, went for the standard exhaust with the square tailpipes!! Sounds really good now with this mod!!

[@atom999]

Any clips how it sound by any chance? Want to add it to my turbo too

[@head911]

I don´t, maybe I can record it today!!@@atom999

[@mariusrumbinas4932]

Would be very interesting to hear it

[@adesai716]

Can you leave the cargraphics module enabled, but toggle the PSE button to open (fully) or close (at low RPM) valves? Trying to get OEM style control of the sound but when PSE activated (by button or sport / sport+ mode) Cargraphics activates too.

[@PbcMr]

Is there any impact on MPG or emissions when keeping valves open constantly?

[@vincetien7331]

Do we need this module if getting the akrapovic Slip-On ?

[@tkc056]

Great video! Do you have any content or guidance for a 991.2? Not much info out there pertaining to where the vacuum solenoid is

[@Flat6Motorsports]

We don't for the valve controller kit on the 991.2 but if an opportunity comes up, we'll be sure to make one.

[@dominiccerchiara9472]

Are these available for the 911.2 model?

[@anderspierre2100]

Looks really good! Does this work even if you do not have the home link system in car?

[@Flat6Motorsports]

Yes, it comes with 2 keyfobs that control the open/close functions.

[@atom999]

Have you installed such controller in 992 Turbo? Any chance for a clip once you do? Ps. great video with tons of comparisons, thank you!

[@Flat6Motorsports]

We don't have sound clips of a Turbo

[@michaelpGT3]

Does this support keeping the valves always closed? Even at high RPMs. Or closed enough to limit sound. Looking for a solution for track days that have strict sound limits.

[@Flat6Motorsports]

Not on the 992. Porsche designed the valves to open up at higher RPMs in normal mode under full load because the car needs to breathe. You could risk damage by keeping them closed.

[@brycewilliams98]

Works on a GT4RS?

[@peterkapusi5882]

Any chance to get it in Europe? I do not want to pay for the customs.

[@jehhrie]

i didn't purchase the sport exhaust of Porsche, Can i install Cargraphic and still have that Cargraphic sound? Thanks in advance

[@Flat6Motorsports]

Yes you can!

[@dhruvsawarkar3285]

does it remove the rev limiter of is it done with m engineering tune?

[@Flat6Motorsports]

That can only be done with tuning.

[@AlenKo88]

Open valves works with homelink but i dont know why valves close didnt work..

[@Flat6Motorsports]

You have to program one for open and one for close, they are separate radio frequencies.

[@botterbuilder]

Will this be coming to the 991.2?

[@Flat6Motorsports]

There is one but it's not quite plug and play like the 992.

[@stacked911]

@@Flat6Motorsportsis it similiar loudness?

[@vmp3216]

I don’t have home link in my carrera so how it will work?

[@Flat6Motorsports]

The kit includes 2 keyfob remotes that can be used to control the valves.

[@montoyabiz]

what kind of wheel and tire setup does this 992 have?

[@Flat6Motorsports]

BC Forged RZ05 w/ Michelin Cup 2 Tires Front 20x9 +48 (255/35/20) Rear 21x12.5 +70 (325/30/21)

[@montoyabiz]

Any springs or coil overs?

[@Flat6Motorsports]

@@montoyabiz it's running Bilstein EVO coilovers: kzbin.info/www/bejne/i4bPf2SIoKd5pZY

[@Slippy777]

does installing this void any warranty?

[@Flat6Motorsports]

Nope

[@samcas707]

How do you revert to oe valve operation?

[@Flat6Motorsports]

You just turn the Cargraphic to the off position and it goes back to the OEM valves closed program. It is possible to then use the PSE button if desired but doubt anyone would want to do that.