9th Gen Accord Throttle Body Spacer

In this video I install the aFe Power Throttle Body Spacer on my 9th Gen Accord K24 and then we go for a little drive to see if there is any difference. Hope this video helps and you enjoy it.
THROTTLE BODY SPACER:
bit.ly/afethrot...
-------------------------------------------------
SUPPORT THE CHANNEL:
CHECK OUT www.bridgemoto... FOR YOU RACING GEAR NEEDS!
Use coupon code FULLTHROTTLE (all caps when entering it) to get $10 off when you purchase $50 or more.
NEED A CELL PHONE, TABLET or ACTION CAM MOUNT? Check out Tackform for all your mounting solutions. Use my link to help the channel bit.ly/FTATack...
WANT SOME MERCH?
You can also support Fullthrottle Auto by purchasing Fullthrottle Auto merchandise found here: bit.ly/FTAteesp...
USE MY AMAZON AFFILIATE LINK TO HELP THE CHANNEL: bit.ly/Fullthr... (It doesn't cost you anything extra but it gives me a kickback and helps fund the channel for more content)
Support Fullthrottle Auto by shopping on EnjukuRacing for your car performance needs by using this link: enjukuracing.co... , it does not cost you anything extra but helps the channel.
Shop on Amazon by using this link amzn.to/2Hl14ZB , it does not cost you anything extra but helps the channel a lot.
THIS ALSO HELPS!
Make sure to Subscribe so you do not miss out on any future videos
like this or anything that might have some automotive fun in it.
THE ENERGY DRINK (ROGUE ENERGY) OF FULLTHROTTLE AUTO:
bit.ly/2ITHDaP
COUPON CODE: FULLTHROTTLEAUTO
Check out my other channel:
/ t3gtech
-----------------------------------------------
SOCIAL MEDIA:
Instagram
/ fullthrottle_auto
Facebook
/ fullthrottlea
Wheelwell
bit.ly/1SmICl7
-----------------------------------------------
EQUIPMENT I USE:
CANON M50: amzn.to/30l6Rut
GIMBAL: amzn.to/2PhlY1I
GOPRO HERO 8: amzn.to/2Ph1lT3
ZOOM H1 MIC: amzn.to/2DsA6lL
SD CARD FOR M50: amzn.to/30izng8
SD CARD FOR GOPRO HERO 8: amzn.to/3k1obMM
-------------------------
Music:
-------------------------
Flow by Nomyn / nomyn
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-_flow
Music promoted by Audio Library • Flow - Nomyn (No Copyr...
Track: Stranger pt. II - SilentCrafter [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Stranger pt. II - Sile...
Free Download / Stream: alplus.io/stra...
-------------------------
#fullthrottleauto #FTA #9thGenAccord

[@Robthevillain]

Most underrated line: “Is there a torque spec? Possibly. But idk what it is 🤷🏿‍♂️” 😂😂😂

[@FULLTHROTTLEAUTO]

Sometimes goodntight is the best torque spec 😂🤣 Thanks for watching and commenting.

[@Robthevillain]

@@FULLTHROTTLEAUTO no prob man. You’re the only 9th gen guy I know who’s current. You give me something to do to my 2013 sport 😂

[@T3GMedia]

Excited to see that track day time!

[@anthonycincinello4834]

Nice man! Looking forward to the autox and track day!

[@TheSking97]

Great video! Definitely helped me make up my mind on adding this mod on my '17 accord lx. Looking forward to seeing the gains with the turbo charger.

[@FULLTHROTTLEAUTO]

I forgot to mention it in the video, but the bracket that dropped on the ground goes to the side back of the throttle body to bolt in the bolts for the throttle body. There's one on the left and right side. Also I put a link for the part in the description if you are looking to pick one up. The link is for the K24, just like the one in the video. Thanks for watching.

[@9thgen85]

I just install mine on a 2017 accord v6. I know it’s not a big deal but mine did not come with a sticker saying the brand or no sticker period. For $141 I would like it to be branded. It can pass as cheap one from eBay.

[@FULLTHROTTLEAUTO]

Thanks for that information. On their website it says if it does not have the sticker that means it's not carb certified. Maybe that's why yours doesn't have it. Maybe they got rid of the certification. Can't say for sure. I'd personally contact aFe to see what they have to say. Thanks for watching and commenting.

[@9thgen85]

I missed reading that part. That could be it. Thanks for replying. Keep up the good work on your videos. 👍🏽

[@FULLTHROTTLEAUTO]

@@9thgen85 thank you! 🙏

[@keithbellair9508]

Yes, when you buy a premium part it should atleast look good… the jet performance ones look the best with their blue anodize.. i got a steeda one and it has steeda engraved in the top.

[@7thkev519]

I have the same car and I was thinking about purchasing both the spacer and caí and aswell the afe Takeda axle back for a deeper tone. But before I make my decision did you really feel any power difference with the spacer and cold air intake or seen any mpg increase.

[@FULLTHROTTLEAUTO]

As for feeling a power difference, no I did not. From what I could tell the mpg was the same. Hope that helps. Thanks for watching and commenting.

[@user-qc2fb2ef7b]

Awesome Accord, I picked one up because I've wanted one for a while. But I've been trying 2 look for mods like Tubo kit. Can you please tell me who makes that kit I would really appreciate it.

[@FULLTHROTTLEAUTO]

Thank you. Sorry for the delayed response. Glad to hear you picked one up, hope you enjoy it. The kit can be found here bit.ly/9thGenAccordTurboKit. There are 2 options, one for the 6 cylinder and one for the 4 cylinder. This is the only kit I am aware of for these cars. Thanks a lot for watching and commenting.

[@user-qc2fb2ef7b]

Thank you for that info.

[@keithbellair9508]

The real judge is if there is a mpg improvement when you commute

[@FULLTHROTTLEAUTO]

So far I haven't seen any increase or decrease in MPG, even with a performance tune on the car. Thanks for watching and commenting.

[@81quiroz]

You probably will not listen to me but try putting a 640 AGM battery and tell me how the car feels after

[@FULLTHROTTLEAUTO]

I actually would do this. However the next battery I'm spending money on will be lithium. But if lithium wasn't an option I would listen to you. Thanks a lot for watching and commenting.

[@nvrmindthis]

🔥🔥

[@definitionXrp]

The throttle body spacer isn't carb exempt?

[@FULLTHROTTLEAUTO]

Some aren't. If it has the sticker on it then it is. Or at least that's what aFe says. Thanks for watching and commenting.

[@SebastianHenke883]

are you going to be at BlackHawkFarms this weekend?

[@FULLTHROTTLEAUTO]

Not this weekend. I'll be there in June. Thanks for watching and commenting.

[@thunderboogers2003]

Are you planning to change your radio system? Put on touch screen car play

[@FULLTHROTTLEAUTO]

Great question. That will be something I do but first I'm focusing on the driving aspect. Thanks for watching and commenting.

[@andrewmolina1169]

I recently this on my 2017 accord coupe, yet the second I turned it on, the throttle wouldn't respond and it will turn off. Do you think you know what that may be? I did drop one bracket so do you think it can be that?

[@FULLTHROTTLEAUTO]

You will need both brackets to properly tighten all 4 bolts. If there is no throttle response that tells me the the throttle body sensor is not fully connected. Hope that helps, sorry I don't have a better answer. Thanks for watching and commenting.

[@markcameroon6613]

if i have an original intake box and add this spacer will it work ?

[@FULLTHROTTLEAUTO]

Honestly, not sure. It doesn't mention it on their website or in the instructions. I would have to recommend contacting them to see if that is possible. If I were to guess, I would say it does, if it didn't I would assume it would say it on the website. Sorry I couldn't give a firm answer. Thanks for watching and commenting.

[@kEEPITMOVIN408]

Do you need to cut the intake

[@FULLTHROTTLEAUTO]

If you have an aftermarket one yes. Not a stock one. I believe I mentioned this in the video. Thanks for watching and commenting.

[@Martinezanthony144]

Intalled this on my 2014 accord coupe. I have k&n intake, borla exhaust, and tune. When stepping all the way down on the throttle my rpms start to slow down after 4k rpms when before they’d just shoot up on full throttle can someone tell me why this occurred? It seems like I lost power. Is my car not getting enough air or is it something else ??

[@FULLTHROTTLEAUTO]

I haven't had any issues like that. I definitely recommend contacting aFe to see if they might have any insight on this. I am certain one thing they might ask is that you made sure that it was installed properly and if the arrows are pointing the right way. Also if you made sure everything was tightened properly. Thanks for watching and commenting. Hope that you get yours figured out.

[@Martinezanthony144]

@@FULLTHROTTLEAUTO yeah I’m gonna check today after work if everything was installed properly. Maybe too much power for the cvt lol jk. I’m gonna reflash the ecu and see if that works. Other than that I get no check engine light so idk. I’ll comment back on here if I find the issue.

[@themistah]

Yo same thing started happening to me ,I'm thinking the gasket is shot and we have a vacuum leak , did u get this fixed ?

[@slaya031]

Can I install this piece without an intake & just keep my stock one!

[@FULLTHROTTLEAUTO]

According to aFe, yes it works with the stock intake. Thanks for watching and commenting.

[@saint3335]

Will this work on the sport model too? Cvt

[@FULLTHROTTLEAUTO]

Yes this would work on the sport model since with has the same 2.4L 4 cylinder. Thanks for watching and commenting.

[@felixregino7935]

when’s the turbo coming in?

[@FULLTHROTTLEAUTO]

Wish I could say soon, but it'll be a while. I have more stuff coming for the Accord however outside the turbo. Thanks for watching and commenting.

[@mmoser80]

What aftermarket Air Intake do you have?

[@FULLTHROTTLEAUTO]

Same brand as the throttle body spacer aFe. Here's the link to the video kzbin.info/www/bejne/oZXTm5abfZJ-rpY Thanks for watching and commenting.

[@kingof8436]

What is the best Throttle body for my Honda accord v6

[@FULLTHROTTLEAUTO]

No idea. Since I don't own a V6 I'm not sure. I haven't looked into it. I know P2R makes something but I don't know if that's the best option. I would take a look at what's available on heeltoe website and then go from there. Sorry I didn't have more information for you. Thanks for watching and commenting.

[@864-domestics7]

Will this FIt 2.4 ?

[@864-domestics7]

Nvm 😂

[@FULLTHROTTLEAUTO]

Glad you figured it out! 😂

[@cybergrindin]

U got a spacer but got the hot air intake instead of the cold air intake.. make it make sense

[@FULLTHROTTLEAUTO]

I can't make it make sense, sorry. Thanks for watching and commenting.

[@Aguayo94]

Where did the bracket that fell off end up going to?

[@FULLTHROTTLEAUTO]

It goes behind the throttle body. There's 2 brackets. Each bracket is for two of the throttle body bolts. One bracket goes on the left and other on right side of the throttle body.

[@Aguayo94]

@@FULLTHROTTLEAUTO thanks for the reply🤙🏼

[@rwalt7196]

Would this fit with a k@n intake?

[@FULLTHROTTLEAUTO]

Not sure. If I was to guess you might need to do the same thing I did with the aFe intake. Hope that helps. Sorry I didn't have a better answer. Thanks for watching and commenting.

[@Momo_RT]

I installed this with my k&n typhoon intake, had to make some modifications to the mount of the intake because the TBS pushed the intake out a fair bit.

[@ciegosanchez5289]

What does adding this do?

[@FULLTHROTTLEAUTO]

Thanks for commenting. As I mentioned in the video it's suppose to add horsepower.