How to Install a Throttle Body Spacer on Your Crown Victoria, Grand Marquis, Town Car

[@neilouellette3004]

Besides the slight increase in hp, the spacer improves vacuum line response which increases performance. Makes your engine breathe easier from combustion to vacuum.

[@kevincruz4045]

Installed on on my 07 TC. Yes it works! I also have the P71 intake tube and a K & N filter so they might be working in conjunction. It is noticeable around 2900 to 3500 rpm only. No dyno test but what I definitely feel is more torque!

[@Toyzri]

Your “Air Bypass” is actually the throttle body position sensor. Huge difference.

[@cardinaloflannagancr8929]

Correct the iac was deleted when drive by wire was done.

[@joebuddensvoicecoach3060]

As friendly reminder try to make your videos 10mins long when ever possible so the KZbin gods can give u more money and coverage.. u were so close today...

[@gregorygolden1296]

You can't help but enjoy Mr. Ransom's videos. I learn something Everytime I watch one. Know I absolutely Love my '05 Interceptor.

[@flawaii-pines6858]

Great videos. Another easy mod for a P71 is to add a center console. A used console from an old SUV works well.

[@K-wayne04]

What suv

[@flawaii-pines6858]

@@K-wayne04 This exact one: kzbin.info/www/bejne/hZTPaIh5ipKVq8U Dont worry if that handle is broken,,, it stays closed well without it. This also adds hidden pull out cup holders for the back seat... Very nice!!

[@ajo4788]

How do you add it in is it a direct fit because the cup holders on my marquis are terrible and the lack of a center console is annoying lol

[@flawaii-pines6858]

@@barfly4523 Most Lincolns have 3 in the front.

[@flawaii-pines6858]

@@ajo4788 Marquis has a 3rd middle seat. Adding the center console only works for P71 vics with no middle seat.

[@flakoGmoney]

Everything looks good but does that mean it will stress out ur transmission wit time

[@Sc0teeBe318]

This is the second video I've watched where you act amazed at the difference a mod made but didn't actually say whether there was a noticeable change. I'm not sure if you're reacting to how fast your Crown Vic already is or if the mod helped that much is what I'm saying. Not criticizing you. I'd just like to know if the spacer gave a seat of the pants difference or if it just sounded better? Let me know. Thanks! Awesome car!

[@MrRandomReviews]

definitely not seat of pants difference....but a NOTICABLE "umph" when you punch the gas. nothing life changing but for the price and how easy it installs...its worth it

[@mrbigt2307]

Do you have a part number for a 2010 Ford crown victoria police interceptor

[@HIGHLANDERNEO2]

The lock washer is supposed to go on the nut side not the bolt side, it's there to make the nut hold better and not vibrate off.

[@hotrodray6802]

Threaded hole?

[@HIGHLANDERNEO2]

@@hotrodray6802 oh ok. That makes sense.

[@tripsquared_greenworks]

Man I love your videos. But.... I bought this spacer for my 04 CVPI Street Package and since mine has the cable I had to use the medium bolts and one of my hoses on the back was too short now so I am on my way up to the parts store to try and get a longer one. Maybe a little disclaimer for us old school throttle cable guys at the beginning. Thanks.

[@jacewilkey8517]

Can you explain the steps of how you did it with the throttle linkage i am at a loss right now

[@mikeydepauljr.8154]

I came across the same thing. Cheap fix.

[@rxmarlo2303]

@@mikeydepauljr.8154 how bro i cant find how to?

[@tacsniper762]

Great !, I installed one of those once in my CVLX 2000 and it work very good and responsive, now I have plans to do it in my 2004 CVLX.

[@Alexrules237]

I bought the same TBS with the same part number and the instructions say to have the surface with the numbers face the throttle body, however, you said to have it face the intake manifold.

[@Alexrules237]

@@SlikLizrd You have the spacer sandwiched in between the TB and the intake plenum/manifold. If you had it facing the intake then it would not face the throttle body.

[@SlikLizrd]

@@Alexrules237 My bad. You are correct. I have a different brand -- TAYLOR Helix "Power Tower Plus" -- however the instructions on the Taylor say the same -- numbers toward the throttle body. Perhaps this TBSpacer was installed backwards, which really confounds any claims of a performance increase of any kind. Comparing the Taylor spacer to the Spectre spacer, the Taylor spacer shows considerable differences in design and machining -- I would skip the Spectre product.

[@mytrigger5613]

Thanks for the clear, concise and informative video. I read through a snarky battle of the (listen to me, I know) minds in a similar install video where the guy decided to cut out the combs in the stock piece. In the exchange one guy who spoke from his experience held that cutting out the combs was wise and created more air while another guy, physics major, asserted that he did not know from experience but logic and reason and physics knowledge tells him that aside from the absurdity that the strategically designed combing was only reducing air, to the contrary he saw the piece as likely evening air flow and possibly speeding it up and why would Ford put it there for no reason. The experienced guy called him s communist and it escalated in to a bunch of experienced guys jumping on the physics guy cause well, I don't know. To me, the physics guy made a hell of a lot more sense, and grammatically his arguments were cleaner, but now I'm curious, cause nothing was conclusive, are the combs pointless and should be cut out? You didn't cut yours out. I feel like it obviously serves a purpose and should be left but a half dozen edubacation deniers thought otherwise. Believe all rednecks, lol or listen to captain soft hands?

[@alexecheverria8428]

Does this throttle body spacer work for a 1995 Mercury Grand Marquis?It has the factory air box and would keep it that way.

[@StanWanda1319]

Hey Brother, I installed the throttle body spacer on my 2006 Mercury Grand Marquis LS and boy let me tell you. I really can feel the difference in acceleration out the gate. I Have a spectre cold air intake on it already and been running that for about a year so I can definitely differentiate. Thxs so much for the Mod idea.!!!! Screeching tires Fo Sho now !!!

[@juanserrano3871]

Y’all want a real mod for ur crown Vic’s !?, change the suspension, do the brakes n rotors and make sure the tires are radial n see for ur selfs (tune up )

[@SlikLizrd]

Like THIS ?? www.mercuryforum.com/forum/grand-marquis-14/1995-grand-marquis-restoration-8937/

[@garyhood9992]

Thanks mr random all what I'm going to say is this I put high performance spark plugs and coil packs and this throttle body spacer in it fells like I awaken the beast within the beast holy shit

[@smttywrbn]

Which spark plugs and coil packs did you put in there?

[@SlikLizrd]

You did three (3) things at once -- you have no idea which mod worked, or didn't. Experienced racers and mechanics do ONE thing at a time -- to get a true picture of any performance increase/decrease.

[@rxmarlo2303]

What plugs and coils bro?

[@hotrodray6802]

Probably just a cooler day.

[@eriv4735]

Hey mr random I noticed you decided to keep the comb when you installed the spacer, is there a reason you didn’t remove it all together?

[@skrip2143]

Looks rather restrictive huh

[@hotrodray6802]

It directs the airflow for less turbulence past the butterfly at part throttle. Those Ford engineers are stooopid. Don't use what they designed.

[@RobertPierson-en3sp]

I cut those bristles with a wire cutter, and ground that "comb" down on mine with my Dremmell, sanded it smoothe and perfectly round, and reinstalled it, better flow. I agree. He should have modified his as I did with mine. I am definitely going to add a spacer as soon as I can.

[@mstjohn33]

The Autozone throttlebody spacer you used is it the Spectre 11261 or another one? Do you have the part number by any chance?

[@hotrodray6802]

Number on spacer

[@amordeweso]

Shouldn’t ya have taken off some of the plastic on the gasket for airflow?

[@eriv4735]

I asked the same question and got no response either 🤷🏾‍♂️

[@amordeweso]

E Riv I think he’s not going to answer me cause I said something about the svt Taurus the old one lol

[@eriv4735]

Rodolfo Munoz Yea the guy doesn’t take corrections too well lol

[@jett-rampartflyer2852]

Yeah any excess gasket or anything in between restricts airflow lol

[@connormclaughlin6079]

Jett-Rampart Flyer so leave gasket off?

[@Shadow_Ops]

Great video! Just finished installing new ETB on my '11 p7b with your help lol keep em coming!

[@wheezywhiz4536]

What’s the etb?

[@BLACKEDOUTVIK]

@@wheezywhiz4536 electronic throttle body

[@BLACKEDOUTVIK]

@@Mike-jf4kf 2011 crown Victoria's aren't p71 anymore there p7B

[@nooppbig8203]

Can you provide a link to the throttle body spacer that fits a 2010 crown Vic from Amazon preferably?

[@fpaltenhoff86]

I have a 2000 ford f150 and bought this spacer, but the instructions say to face the numbers on the spacer towards the throttle body and to use the shortest bolts that come in the kit (50mm)

[@WhoKnws]

What are those rims

[@bigggmustang73]

Can you replace that plastic throttle body gasket with all those bars obstructing the air path with a regular gasket??

[@SlikLizrd]

YES, you can -- but the whole idea of a Throttle Body Spacer on a Panther engine is a waste of time and money -- they DON'T WORK on these engines !! Period.

[@lifeonadime4703]

They do help throttle response but not much. Best to save your cash and get a good ported or larger throttle body all together. On tbi engines it made more of a difference because the injectors were in the tb just like having a carb. But hey, you could always tap it later for nitrous😈

[@tjkilshot]

Hey man! I got that same spacer and it fits perfectly...only I have a slight problem. I have a cable throttle body and not the drive-by-wire throttle body. Any tips or a video to help us out that have the cable throttle body? Could find any videos

[@MrWontstopthefunk]

Bbk throttle body with ported plenum. P71 Down tube 80 msg sensor and cold air intake

[@Lee19711]

Great example of how to remove "aka phantom power from your ford” Same would apply if changing airbags. Good job my friend. 👍👍

[@lawofliberty3517]

Keep factor air intakes. They ARE Optimised for THAT motor and are ALREADY "cold air" intakes. Unless you get a HP intake plenum, it isnt worth it. Sucking hot air from the engine bay is literally a loss.

[@alejandrosalas1668]

Yes yes yes yes! You literally just Stopwd me from cutting my factory air box to make a cold or warm air intake

[@lawofliberty3517]

@@alejandrosalas1668 good. Sucks seeing people do this now. Hot air intakes🙄because they look cool. I fell for it years ago, lessons learned😉👍

[@BLACKEDOUTVIK]

Lol or buy a real cold air intake shit my 2011 loves my AFE Cold Air Intake

[@cesarblanco1787]

I was wondering, how do you adjust the cable if it’s a bit short when you put the spacer

[@vitaliygolling2345]

my respect dropped for ya

[@MrRandomReviews]

never needed it in the first place😂 like i NEED a 5th graders respect😂😂😂

[@vitaliygolling2345]

@@MrRandomReviews wow what a tool

[@eriv4735]

💯😂

[@isayah7755]

Will this be the same on my '03 crown vic LX?

[@Rdmnry]

would it be bad if you put a 75mm throttle bady and a spacer?

[@SlikLizrd]

No sense in slapping a bigger Throttle Body on there unless you do a camshaft upgrade and a dual exhaust with straight-thru mufflers. Think of your engine's performance as a chain -- the chain doesn't get any stronger by adding one link that's bigger than the rest of 'em.

[@rodsapyta7059]

MIAMI,, where do you get your information for the up grades ? I had three P71's , well I just sold one, I mean , two, P71's but I want to make one of them, with some, of the up grades. Thanks for the video's. Brother.

[@DenaroThaGeneral6]

What mods have you done to your Vic? I’m on my 3rd Panther (Grand Marquis) and this go round I’m looking to make it as fast as I can.

[@jakemccain9825]

Gear Ratio, look at a tuner and a larger throttle body, also fuel filter

[@TylerGamer765]

Great video brotha!

[@n.b.p.davenport7066]

The one you're working on is an 98 I don't know what year it is

[@ssgsschiraq8858]

So I started it before I rested it and it threw a lean code and it sputters when I turn it on but after a while it works fine.. can I do the reset and it work?

[@rufinomunoz3930]

Hey sir i believe u inserted the plate the wrong way .. the numbers go facing the throttle body spacer .. that’s what the instructions state ..

[@Milpower]

I know others have said this, BUT, the numbers are supposed to face the throttle body (as shown in Step 5 of the included directions).

[@Milpower]

Also, that is not a "re-useable gasket", but rather an actual Ford throttle body spacer and you really should have used BOTH gaskets.

[@Mrfatbelly]

What kind of grill do you have?

[@SlikLizrd]

I have a CHARBROIL Grill. It makes killer cheeseburgers. I have a MERCURY grille in my Panther. It's chrome.

[@thealliedspy4170]

Yeah

[@brianallen9256]

Do you think this can be installed with my AFE CAI? Can't wait to see the Vic super charged 👍 I've thought about it but my 06 cvpi is getting a kinda rusty up here in Minnesota so I plan on buying a much cleaner panther by the end of summer and hopefully super charge it sooner then later. I've heard anywhere from 350hp-420hp with similar torque specs depending on tune and boost. 0-60 in around 5.0sec. Anybody know if those numbers are somewhat accurate?

[@MrRandomReviews]

with forged internals you can easily get in the mid 400s...with a basic setup youd be looking at 350-375ish

[@brianallen9256]

@@MrRandomReviews I'd he happy with those #'s. I owned a 1995 cvpi for 11yrs prior to my 06 that I've owned for 5yrs so far. To me the only thing these cars need is a boost in power seeing how they are 2 ton boats. I've Only gotten stranded twice in 16yrs of owning cvpi's. Hard to beat these panther platform cars in durability and reliability if you treat them right.

[@eriv4735]

This can be added to the afe with no issue

[@mcf3778]

Should have no real problems... I had one on a 5.4l 2v and it didnt change any geometry when i had a CAI but then when i moved on to a paxton novi 2000 kit i had to modify a tube because it brought out the pipe too far since it was all hard mounted

[@TheMode541]

When you started the car was the jumper wire still hooked up when it was idling for 15 mins? Or was the jumper just on for the 2 mins?

[@everardomartinez97]

I have the same question

[@papiskeeter]

No you remove the jumper, it’s only function is to relieve any electrical current still left in the system (basically the car had to die completely for the Engine computer to reset itself)

[@Whoswac]

@@papiskeeter will it reset my tune.

[@papiskeeter]

@@Whoswac if you mean your factory tune no, but if your running a stand alone ECU with a custom tune or a flash tune I am not sure.

[@Whoswac]

@@papiskeeter yes it’s a custom tune

[@oldschoolrican]

I just installed one for my 1997 Grand Marquis & I feel the difference! Where did you get that yellow aluminum tape for your air intake at?

[@jasonlittle118]

What did you do with the linkage adjustment?

[@rxmarlo2303]

@@jasonlittle118 have u found out bro i cant seem to find help on how to on these older tb

[@Whoswac]

Can I use booster cables and also will allowing computer to reset to adjust to spacer will that also reset my tune ?!?

[@kennywarren2317]

Do you still have the spacer on your car?

[@stevedegen7215]

can you add spacerto 2003 crown vic with out electronic control

[@SlikLizrd]

Yes, but Throttle Body Spacers DON'T WORK on these fuel-injected engines. Save your money !!

[@mikeknutson415]

Now wait a minute I was waiting for the climax of the video for you to tell us the difference that you noticed... all you said is it's going to get you in trouble ...I want to know how did it feel... what difference did you notice.... let us know

[@SlikLizrd]

Mr. Random doesn't LIE to us -- so he doesn't tell us that the TBSpacer WILL improve our performance -- just that we MAY feel a difference. I won't lie to ya either -- TBSpacers DON'T WORK on fuel-injected engines. Period. 😁

[@jaye23able]

would this be better on my 04 lx sport and do I need to do the idle relearn on it?

[@MrRandomReviews]

yes and yes

[@eriv4735]

A 2004 still had a throttle cable..a relearn should not be necessary for idle but you may need to put a few miles on it so the comp picks up on the new curve

[@jaye23able]

@@eriv4735 that's what I thought, I thought the relearn was on the drive by wire throttle

[@eriv4735]

James Robinson Yes that is correct..good luck with that sport man they are becoming very rare these days

[@kravoglupa]

How does $6k sound for a one owner LX Sport with 42K on the clock? I'll have to sell my 94 Fleetwood if I buy it..it's a hard decision!

[@amyanderson4522]

Stack up a bunch of washers and wrap it in flex tape

[@eriv4735]

Make a video..I’m sure people will eat this up lmao

[@jadz684z]

And thats the power of flex tape

[@stevenstaples6938]

Can i ask where you got the hood scoop from.

[@alrasheedan9712]

Where is Amazon's purchase link?

[@MrRandomReviews]

got it from autozone

[@eriv4735]

Abu Fatima eBay

[@atx-cvpi_99]

m.autozone.com/fuel-delivery/throttle-body-spacer/spectre-performance-throttle-body-spacer-11261/ford/expedition/30999_968511_0?aqs=

[@somebodysomeone8213]

Spectre part # 11261 is the correct Throttle Body Spacer he uses in video.

[@prosavage1313]

For a f150?

[@brianclarknumismatistappra6085]

What is the gold tape on the intake hose?

[@MrRandomReviews]

decreases Inlet Air Temperatures

[@SlikLizrd]

The Gold Tape is just some shiny stuff that's put there to make you think your car just got smoother, faster, and more economical, too. It didn't. Cold Air Intakes and Throttle Body Spacers are pretty much useless on street-driven, fuel-injected engines. Likewise, "Racing" Oil and Oil Filters do more harm than good -- wrong application = lost performance and/or engine damage.

[@paulalaniz2787]

Sup guys I got a question. I got a 2003 crown Vic and. I got the 78mm but the cruise control cable is giving me hell. How do I get it off the old intake.😅

[@TAZ95C4]

Is the idle relearn necessary for the cable TB?

[@eriv4735]

It shouldn’t be..you might have to drive it for the comp to learn the curves but idle should be fine

[@excerciseninja2902]

I need help my brother just got in the crown victoria08 game I'm.trying to boost it up but don't know what suspension to use or the shocks also the transmission and engine can you aim me in the right direction.

[@P71ScrewHead]

Raake or ADTR suspension/coilovers, they come with shocks, or just any oe shocks will work.. Engine mods, just build it all out man, expensive but fun..lol Do full bolt ons 1st, longtube headers n all, engine will handle 450rwhp if tuned right but for anymore you'll need Forged Internals, go with a 5.0L stroker kit if you want more than that, they take 800+hp so you'll be good..

[@Entregolpesmma]

Donde lo puedo encontrar hermano?

[@wopalongcassidy]

Who do the voodoo that you do?

[@YBGHOSTBOY956]

Can I get the link for Amazon

[@s.o.s.ashowoffstreetaudio6895]

Did the 1st spacer u had that u said was wrong make your car sputter wen giving gas how u knew it was the wrong 1

[@bootloopgaming8642]

is that a magnaflow exhaust?

[@alexl5480]

Does a 2002 crown Vic air filter fit on a 1998 crown vic

[@SlikLizrd]

YES.

[@jasonhodges6450]

What is that gold wrap on your intake tube?

[@StrongManMattt]

heat reflection tape, guess he's trying to keep his intake air cool...

[@MrWontstopthefunk]

Why would we not want to remove the reusable plastic/rubber gasket that appears it could restrict airflow???

[@hotrodray6802]

Ford engineers are stoopid. Throw it away. 🙄

[@psycobone1]

Mine says the numbers face the throttle body & it's the same exact kit

[@kdstunts_641]

Do you have a video on how to fix the rear doors so you can open then from the inside. I do have the pin on my doors I need the rod that connects to the mechanism well I want to know how to make it

[@morchella1960]

I cut up tomato cage wire and used that...works great and super cheap

[@Dragnet2]

What does this actually do?

[@71sc502]

"Nothing" -magic conch

[@eriv4735]

A marginal increase at low rpm..not much elsewhere

[@BLACKEDOUTVIK]

Faster throttle response

[@SlikLizrd]

It's designed and manufactured for the express purpose of relieving unsuspecting people from their cash -- and leaving a feeling of shallow emptyness in it's wake.

[@carsontoopes837]

@@SlikLizrd see but I really like where It put my gas petal and the its considerably hard to press, feels awsome

[@Unlaced_kickz]

Will this work on my 2006 p71

[@petermelnyk7664]

5.4...and 4.6 same intake .?

[@cvpi_dev]

Can you run this and a ported throttle body?

[@phillymikea]

Love your videos!!! 🤟🤟

[@johnhonest9347]

Do u really feel a difference

[@SuckMyVic71]

With a tune I did

[@SlikLizrd]

YES !! About the same difference as the feel of different cheeks of my ass.

[@sethyboy8974]

So I installed this on my 2011 vic and got the wrench symbol but only noticed it after like a 5 min test drive, did this activate "limp mode" or do any other irreversible damage to my engine?

[@MrRandomReviews]

nope...you should be fine. once its in limp mode theres no coming back and its usually transmission related

[@sethyboy8974]

@@MrRandomReviews thanks my man, and by chance what do you think could’ve activated the wrench symbol?

[@alexlozada1939]

@@sethyboy8974 could be a fuse or 2,mine went on limp mode I had about 25 different codes I checked the fuses and 2of them was blown so I replaced them and the car went back to normal 💯

[@Sunnythug95]

I got a AFE cold air intake on my 2011 Ford Crown Victoria police interceptor. The cold air intake has the metal tube with the blue air filter. I put the same spacer that you have on, but is my cold air intake tube suppose to get hot? I noticed a slight increase though, not too bad.

[@bigmike4720]

If I buy this spacer mine is drive by wire do I need a tune

[@slicambition4079]

I installed throttle body spacer. My exhaust manifold is wide open like some one is on the gas

[@TheHabibalby]

you are tempting me to purchase one from my Grand Margis 08 :)

[@hectordominguez5742]

I just did for my 08

[@kennywarren2317]

@@hectordominguez5742do you still have the spacer on

[@n.b.p.davenport7066]

Will that work on the older models? Please respond

[@dylanweldon1363]

Will this work for a 97 grand marquis ??? 🤔

[@SlikLizrd]

Your '97 Grand Marquis takes a different model of spacer, due to the difference in throttle actuation. The '97 has the throttle cable, the newer ones have the "drive-by-wire", such as shown in the video. My '95 Marquis is the same as your '97 -- I tried a Spacer, and advise against such foolishness. ;>)

[@dylanweldon1363]

@@SlikLizrd I plan on doing cam an head work on it but the spacer I got for it won't fit an the guy told me it would I'm new to ford motors

[@taitai4real]

It is ok for me to run Crown Vic Throttle Body Spacer without relearn ?

[@MrRandomReviews]

im sure it is but i wouldnt recomend it

[@taitai4real]

Mr Random Reviews Can I use the regular size positive jumper cable to relearn ?

[@alexisdavila3716]

Does your throttle body spacer make a sound whn driving ?

[@MrRandomReviews]

nope

[@issaissa2803]

How many hp increased? And how can increase my crown vic hp

[@eriv4735]

Anything you can do to a 2v mustang you can do to a panther

[@issaissa2803]

@@eriv4735 could you please explain what you mean

[@eriv4735]

Issa Issa Any modification that you can make to a 2v mustang you can make to a panther

[@toddgilmore118]

Does this computer relearning thing work with older 2001 Grand marquis with standard sensor not hard wired?

[@punkbutler88]

i never understood "locking washers". All they do is flatten. What locks about them? 🤔🤔🤔

[@glogang5326]

What if my throttle body is not electric

[@landonyoung7675]

Hey mr random, I know this is an old video but I have a question, I just installed mine and it’s a very tight seal with gaskets. But after I do a pull or high revs in general it makes like a whine noise?

[@prosavage1313]

Yes. But i have a quesion. Whats the part number? 11261 is for a f150 4.6. Will this work

[@landonyoung7675]

@@prosavage1313 part number for mine was 729846, from summit

[@jacqueshunter8320]

What's up man? I love your info videos but, the only years you seem to mention is from '98 up. I have a '96 Crown Vic base model. Is there alot of differences between the '96 & the '98? Help me out. Thanks.

[@incarnadinelifestyle]

Check out the Airraid 400-518 for those. I have a 98 and it makes use of a linkage plate (with your spacer), etc. Different than the gen 3 CV.

[@jasonlittle118]

What about the added length to the accelerator linkage?

[@hotrodray6802]

Fly by wire

[@earlehunter7579]

Is there any modification to the throttle cable

[@prosavage1313]

Will the spacer for a 1997 to 2010 f150 4.6 work?

[@alexlozada1047]

Hold on there’s a cop 👮‍♀️😂😂😂

[@the_mysterious_gamer1657]

Oh I have a question, does the 2005 CVPI have a manual throttle body, rather than a drive by wire?

[@kravoglupa]

I'm looking to buy an '04 LX Sport near me, and I've done a lot of research...from what I've read, they switched to drive by wire in 2005.

[@the_mysterious_gamer1657]

kravoglupa Yeah I wasn’t so sure, thank you and have a good 4th

[@eriv4735]

Yes I’m pretty sure 2005 is the first year for the electric throttle body

[@johnnyfedpost1776]

Hey Mr. Random, I just installed this exact spacer on my 2011 P7B however it now sounds like a cammed shit box. Did I miss anything? Please help a brother out

[@angsecurity7603]

my only concern... will this hurt my Vic in any way or throw the wrench light?

[@dreadnoughtprime6301]

It might throw the ol wrench light if you have an electronic throttle body.

[@angsecurity7603]

@@dreadnoughtprime6301 thank you for the input, main reason I have waited on installing it. I have a 2007 CVPI from the California Highway Patrol. Has that Electronic throttle body so I didn’t want to risk it without other opinions

[@dreadnoughtprime6301]

@@angsecurity7603 I don't know if it will help, but mine threw a wrench light when I did something as simple as clean the throttle body and install an aftermarket air filter in the stick air box. I fixed it by turning my key a few times to cycle things. Never had it since. My parts guy said it's not quite worth doing a lot of mods to the PI variants because they're already running pretty efficiently. They do make over 10hp more than the standard dual exhaust Crown Vics from the intake setup alone.

[@sr212787]

Tips on doing this on a 1990 one?

[@mikeknutson415]

And here's another one for you when are you going to add some nitrous bottles to that bad boy

[@robertobuenrostro2781]

Goño you ready to go Racing. 🚗💨

[@newguy1665]

I have 98 do I have to do the computer reset