A 25 CENT PART DESTROYED A $25,000 ENGINE!! Way worse than we thought..

Welcome to the channel!
My name is Tim Gentry, I love Truck driving and working on rigs with my son Braxton at my side! His dream has always been to fix and work on cool projects!
Feel Free to contact us if would like to help in our Father and Son Projects!
Email us at [e-mail]
Our Instagram page!!!
www.instagram....

[@Gentryandsons]

WHO THINKS THE CORANADO deserves a full rebuild top to bottom front to back??

[@williamroy1902]

Refurb... but, keep the color the same.

[@tylorsamples1991]

I think it needs top to bottom

[@kirktitgen7453]

Yes full rebuild then a complete detail ....thats a nice truck to just beat on and be filthy

[@Jerrylee84]

I think she deserves a rebuild having put that many miles on it

[@josephboley]

The Coronado is my favorite truck cause of the paint.

[@jth1699]

My idea is to rebuild before you drop a valve - dropping a valve is usually caused by an over speed- probably going down a hill with the Jake's on... when you look at the expense to go get a truck or a wrecker bill or a rebuild in some shop - the milage you give up by rebuilding before it breaks and on your own schedule doesn't make a hill of crap... you can standardize your fleet and have a couple of engines ready. You can change out and engine transmission/clutch in short order and have the machine back on the road before the driver gets done with his 34 hour reset... I used to have a few trucks and that is the way I took care of them so fix them before they break.. I used to change out an engine overnight when i would sell one - usually to a rock hauler. Two good guys and the right equipment and an engine change goes really quick... new mains and rod bearings - water pump and idler pulleys and oil pump at - rebuild turbo at 300k - takes about 12 hours. Main and rod bearings- water pump - oil pump - idler pulleys rebuild turbo - rebuild head pistons and liners at 600k - out of frame rebuild at 1 million miles - rebuild injectors at every bearing change. Replace transmission bearings at 600k. If you stay ahead of the major stuff so you dont break down on the road the savings will transfer directly to your bottom line.. there are industry averages on how long all these components last - use them - learn by other people's mistakes... it's cheaper then learning by your own mistakes...

[@mctransportation9831]

Do you mean it was in too high a gear when going downhill?

[@sodapop8408]

I was glad to see you get that little rig back I just love that thing low overhead makes $$$$$

[@Bryanja81]

Steve is a good guy to have on your team. Thank you Steve!

[@stephengasper3027]

Thank you so much !!

[@bustertim5333]

That was a hell of a engine to go 1.3 million miles rebuild and go another 1.3 million miles with it . I read one comment that said you didn't do regular maintenance on the truck because it was dirty inside I told him it's going to be dirty inside it has 1.3 million miles

[@robertshepherd7780]

.

[@adamhogeland8033]

Dropped valves on the pistons and possibly some cam issues with the back three cylinders

[@billarends2244]

I agree!!!

[@harleyclint]

What you do with your son is awesome. Wish more people took more time with there kids.Love watching your videos keep up the good work. Cletus from ct

[@joemoody548]

I really like that you keep it real. keep it up.

[@brucehooks7508]

In-frame overhaul, that is a 2 day project maybe 3. I loved doing those when I work at a Detroit Diesel shop in FL. It is a lot easier when you are inside with an overhead crane to pull/install the head. Still got my tools, thinking about getting back into it.

[@ANTHONY-h6w]

Hey Tim hope you are having a good weekend with your family!!

[@Gentryandsons]

Definitely and same to you brother

[@lylechapman9757]

That family and friends softball sounds like a lot of fun. Good on ya Tim for bringing the families together 😊

[@Josh-qy5gv]

Tim make sure you build some covers for the hydraulic fitting for that skid steer grapple

[@jakobharris2719]

6:03 No wonder your ac stopped working. It's a Goodman.

[@Blacksheep1968]

Give the Coronado some Love!

[@marrow1154]

I was driving a Detroit before and that same problem it was a crack in the cylinder head like always Jamaica 🇯🇲 is watching your channel

[@BigCool95]

I find it ironic that i got an advertisment for detroit engines at the beginning of this video. Hell yeah it needs a full going through

[@colesteven1123]

Tim, finish up those welds where the rams connect on the grapple. They snap off pretty easy

[@SkaBob]

We had an 89 chevy dump at work with the 7.4 a long time ago. It had something like a plastic anti drain back or bypass valve in the oil cooler outlet, the little plastic piece broke apart and ended up blocking a crankshaft bearing oil feed and killed the motor. Found it when I pulled it apart.

[@Dead_Folwers]

Seen dozens of D60s outta fitzgerald trucks do the same if not worse, double check the block for cracks between 3 & 4, sorry about your bad luck Tim but that's trucking great video!!!

[@andrecharron8070]

$9 a gallon for diesel in Ottawa Ontario today!

[@ATK111]

I’m in the operators union in Canada and I’ve operated dozens of skid steers. Never seen one with steel tracks. Now I’m a dozer/excavator operator but I’ve operated many skid steers too and that’s a first for me. Rubber track did by hurt asphalt and are quiet.

[@graemewoodruff9988]

Glad you got that little truck back, the wheels really set it off!!

[@donwiley1055]

They're against Tim another good video I said I thought it had a hole in the piston and wasn't quite sure but I didn't know about the valve to but with that many miles on that truck it deserves to rebuild from the bottom to the top and then that way you know what you got in it new motor is good for a million more miles again can't wait for the next video may God be with you and your family

[@darrenhawken9766]

The ups and downs of trucking, thanks for the insight , keep on trucking 👍

[@zulumagoo1]

I worked with a marine transport driver while he was hauling HazMat for Bealine Trkg. Pasadena, Tx. Great guy. I hope he's hauling connected to ya.

[@adamhogeland8033]

That turbo needs to be mounted on the wall of the shop

[@lurycharles-pierre1223]

Hello I enjoy watching his videos I love tractor trailers this video make my day

[@JDGeorge240sx]

Dont see many cornado videos, Keep the rebuild coming!

[@wasted6666]

Good Evening Y'all Love All Your Trucks & Videos I've been a plumber for like a hundred years I'd Love to drive a big truck around town Honk the horn at Trains Appreciate Your Knowledge Thanks Safe Travels Always

[@edreeder9853]

I had some thing happen to a new reman engine had 82 miles on it, just loaded and left Cleveland Ohio headed to Knoxville Tenn., About 12 degrees , sitting there waiting on a wrecker and backup truck..

[@andretvvlogs8406]

Hey Tim blessings from Jamaica

[@dozer4631]

The single axle freightliner is one of my favorite

[@tyosburn5463]

Tell Steve he needs to go get him a set of field piece digitals. He can forget about those about numbers and get exact numbers lol that’s what I did before I started driving I’m actually licensed in Arkansas, Oklahoma and spent a time in Memphis and Louisiana doing hvac service and installation as well. Field piece are definitely worth the money. And definitely full rebuild on the coranado I love those trucks

[@stephengasper3027]

I have digitalis but battery’s were dead lol .. I’m a factory tech rep for my other job

[@williamvangorden44]

The man opening the Alaskan Pipeline and to get rid of this Administration forever.. that would be a great start..

[@ceezer6262]

All day rebuild the beast.

[@motownlee3765]

god bless that 60 series Detroit.

[@ericgriffin397]

Another great video, thank you Tim, be safe on the road and God Bless!!

[@zulumagoo1]

"We're not related by blood... but i do sleep with their mom!" That... is fatherly love when both of yourr beard wearing step-sons, are working side by side with you. (he BETTER be their step.)

[@stephengasper3027]

Lmao I am and I give them hell but I take care of them nick is a hotshot driver and Nate is a shop helper working on his CDL has his permit learning trucks fro Tim’s dad .. they took me in then them as part of the family !!

[@matthewbloom6715]

Tim’s going to rebuild rescue. Looking forward to it!

[@fredtusing9700]

Redo the whole motor and give more power and I'm watching everything you do and I love everything you and semi truck are fun

[@jkorth2012]

MDS out of South Dakota makes awesome tractor/skid loader buckets, attachments, pushers, grapples, forks, etc. Should check them out!

[@greggostrowski3632]

Drop a engine in it and roll it's still a good truck I wouldn't go to crazy

[@riverrat1284]

If anyone is going through Frankfort Kentucky on 64 the Race Track gas station off exit 58, has two fuel island for big trucks, and diesel there was 3.99 a gallon

[@donaldswark4588]

Safe travels.

[@robertjones5217]

I’m an owner operator out of Indianapolis Indiana Where getting the fuel surcharge but the cost per mile on what some of this stuff pays has gone down hill It’s almost like you said these brokers are pocketing what the truckers should be getting

[@donaldjrchappell6800]

Tim if you can get the parts, rebuild the series 60. This DD's are great highway engines. I worked for Kenworth here in Michigan for several years. Detroit's on the highway, Cat's hauling gravel and Cummin's for the in-between. FYI....not confirmed, but, I heard that the government is paying company's to destroy non emissions engines. This may be way parts are getting harder to find too. On a different note. There are a few places here in MI to check for parts and used engines. Grand Rapids: AIS engine Frontier truck Valley truck Kalamazoo: KMR - Kalamazoo metal recyclers Holland: K&R truck - International truck dealer, body shop, salvage yard. Hope this helps

[@ralphredmondsmull1773]

LET ME KNOW IF YOU EVER COME TO THE HAMPTON ROADS AREA OF VIRGINIA

[@ronaldgentry9923]

Broke a valve, trashed a cylinder. thats my guess

[@oregonfordguy9812]

that sucks bro. I absolutely love my detroit. it had 3 engine overhaul in one year. finally seems right and happy. best wishes for the rebuild.

[@25slider]

Thanks Tim for another great video great job new motor thanks again

[@chrisyant]

Love what you do in the trucking world

[@rags-fv6ko]

Love this channel I need to bring this 359 over there

[@francisleconte8826]

Keep going Tim , from Victoria Australia

[@leechavero7770]

Fuel prices are going up while freight prices are going to he'll. I'm making my way home gonna park for a week and half or 2. I'm a reefer driver owner op.. no Fuel surcharge. But my farm season is coming soon

[@christhomas5794]

On your way to get the sunken boat from Heavy D and the giveaway truck big respect from the UK

[@marksmith-ew7ir]

Here in UK shell is charging £1.99 Ltd I go to Costco and pay £1.66ltr

[@richardhoneywell7411]

Definitely needs a full rebuild.

[@rickpullins8590]

Wheels look great Tim great video.

[@AmericanaWoods]

“We ain’t related by blood but I did sleep with their mom” 😂😂😂

[@stephengasper3027]

“Do”

[@gregperringp]

I need drivers lol. But it's cold up here in the winter.

[@JordanYMM]

We paying just shy of $11 per gallon here in eastern Canada

[@tracymiller1881]

You need to get Braxton to polish those tanks on that little truck so it looks right since you have polished wheels on it now.

[@nayster0814]

That buff out timmy what r u talking about 🤣

[@2strokesimdone833]

My absolute favorite truck.

[@MrTk6969]

Ya need to check the inducer of the turbine

[@NoblePineapples]

I don't know enough about diesels to take a guess what happened but I am hoping I can learn a bunch watching your videos. (Here from the Cleetus long haul video from a couple days ago)

[@jonathansparks7558]

Thought you got rid of the little Freight Shaker

[@serasgaming]

i say put a 3406 cat in it they sound epic and built right they can out pull anything detroit has ever made

[@danielburris9065]

Coronado definitely deserves a full rebuild

[@SternLX]

Man I was wishing I had Nitrous yesterday running West on I-70 out of Grand Junction. Between the extremely high head winds and the mtns I was stuck Chugging up the hills at 35mph. Damn CAT C9 ACERT has no balls down low at all.

[@chrisl2090]

@7:27 Hitting a little to close to home now my guy!

[@davidmaust1415]

Too bad the Coronado's engine decided to blow up, but 1.3mil mi on a motor is doing well. I suspect that the boat might be the one for rebuild rescue

[@jaimemaldonado4152]

It is $6.50 a gallon out here in Cali ...and rates keep falling ...

[@kevinmhardie842]

Appear in Wilmington North Carolina I paid 595 for diesel today

[@Thesuperlate]

Good stuff Tim! Sounds like you’re going to PA to get that yacht for Rebuild Rescue. If that’s the case and that’s who you are getting ready to do a collab with that will be super cool! Stay safe out there driver🤙

[@billywhite3020]

The Coronado needs a new motor from top to bottom

[@cruisersrus]

Tim there is a 2020 Coronado glider in Columbus ks for sale. 261,000 miles 500 horse 60 series 13 speed.

[@David-uu1oj]

I'm saying hole in piston plus....... 🤔

[@marshastamp6947]

I loved my faithful Detroit

[@klosnoski]

In duluth MN tow companies are charging on avg of 4.50 to 5.00 a mile. Last I heard

[@dano4572]

$6.79 per gallon here in Redding California 4/8/22 for diesel !!

[@moparcarguy]

I smell a collab with Rebuild Rescue.

[@Gentryandsons]

👍

[@OhMyGlockk]

I know what’s wrong with it, it ain’t got no gas in it 😂

[@mikemullay5622]

You have a lot of trucks sitting around that need work. Pick one and fix it. Then when it is done, fix another one. Seems like you have a lot of rigs sitting around in pieces. Obviously do what you can afford of course. But if the wheels ain't turnin', you ain't earnin'!

[@justynanderson70]

It ain't got no gas in it!

[@jerrydutra3225]

The knuder is shot 😁👍

[@bobbobby5724]

You are very nice man,and that why we love you 🚒.

[@matthewwilson2991]

Possible high rpm down shift . On a 1.3 million engine . Broke the valve . Valves in the combustion chamber stress cracks over long time.

[@patriotmob3227]

Were is the stubby single axle day cab. were are all the trucks at give us an update.

[@anthonyholloman5736]

What's your input on a man wanting to starting his own business with a truck and dump trailer Timmy I think the green freightshaker does deserve a full new make over keep these videos coming brother and as always be safe out there and keep it between the ditches

[@katmandu8208]

1.3 MIL that truck pay for it rebuild.👍🍻

[@earlbrown]

Video actually starts at 13:00

[@6181green]

We are at 5.25 a gal for diesel in Kansas City

[@johncrawford3833]

I would still love to have that old green truck that you said was junk

[@steveschwartz9827]

Been there done that. Bull gear key sheared put cam out of time.

[@codythomforde7582]

Pull the center out of the exhaust housing

[@brettandersen9532]

That really sucks what happen to the coranado you need to get the Peterbilt going and the freightliner

[@russrockino-rr0864]

It seems like your trucks break down way to much Tim, LOL. What a mess

[@localcrew]

Wrist pin circling.

[@brianhobbs4605]

You think it's hot? 108 here in Abilene texas today

[@jordypeerens1909]

Piston 3 if you begin of left thats something wrong with it i think that from what i sa(see) sorry my english is bat but i,love youle guys and the GENTRY FAMILY 🥰🥰🥰🤗🤗🤗🙂🙂 i wish i had the stuff you got to wurk god dame i living in europe "belgium" pfff here it is dead!!! My ❤ is in youre country *!! Big love out belgium !!! Oost-vlaanderen hamme!!!!