A closer look at the Frost Form Starter+ Kit

[@AdrienneCM10]

Just got my kits today! I'll be trying it with swiss meringue buttercream. Two tier 8" and 6" cakes for my son's birthday. I hope they turn out nicely!

[@americancraftssweetshop]

Let us know how it turned out!

[@AkpuOzioma]

How much please?

[@americancraftssweetshop]

@@AkpuOzioma you can buy them at americancrafts.com

[@karenhughes_2470]

This effect can be obtained by using acetate, without the expense😊

[@ThestuffthatSaralikes]

I was just thinking “I have a cheap cutting mat made of that material..I wonder…” 🤔

[@couragedearheart2951]

I have tried this, but I have problems getting the acetate to sit in the pan or ring perfectly. I know it should work, but it was a comedy show!

[@canzadyblue]

How do you take am 8" cake off the bottom liner after its frosted?

[@minajones4834]

Has anyone ever used this with whipped icing? If so, what recipe did you use to keep it stable?

[@Marys-mi6fh]

beatiful the recipe for the ganache is special for that ?

[@americancraftssweetshop]

You should be able to use most ganache recipes, but you have to be able to heat it up enough to pour it. If you check out our channel we have another video on how to make the butter ganache that works well with this.

[@Наталья-ю4й4в]

Как можно купить вашу продукцию

[@couragedearheart2951]

@@Наталья-ю4й4вb

[@riasheldon997]

I purchased frost form with the metal cutter, i had a nightmare. Everything was going OK following the steps i don't no what I done wrong but i poured the ganache over the cake and it all started leaking into the base. I did contact frost form to explain and got no reply, but did get a comment from someone saying its done by magic. Not a nice thing to send to someone who is asking for help. So still don't no why it all leaked out.

[@americancraftssweetshop]

We apologize we weren't able to respond sooner and are sorry for the lack of care you've received. It sounds like the tools you purchased are not the American Crafts kit so we are unable to help you specifically. We recommend reaching out again at [e-mail] or on one of their social channels.

[@greekdolcelove6143]

Did you use candy melts?

[@MichelleHughesTOC]

Please show in slow motion how you are putting that frost form wrap inside

[@mamodisemachuisa3162]

hi m in south africa free state im looking for frost form kit

[@robantif]

This was a nightmare to use. Returning it back asap

[@americancraftssweetshop]

Oh no! Anything we could help troubleshoot with you for better success? You can contact us directly at [e-mail]. We would love the chance to make it right if we can!

[@dbarnes66]

Please tell me why it was a nightmare. I have been wanting to order one and just decided to go ahead and do it.

[@0lucy06]

Yes @robantif what was the nightmare?

[@KathrynRoberts60]

I watched a detailed video made by a seasoned cake decorator, and the word "Nightmare" fit for her experience also

[@FranklinandFig]

Sorry also what’s the difference between your version of the front form and the original?

[@buschenkomarie]

Less quality....just learned that today.

[@yvonnecamley289]

Looks like her frosting has split. I’ve been doing this with acetate for years. Also do it with number cake

[@heatherknight1285]

How do you do it with acetate.

[@RedneckBeautywithDebra]

Hey there from Texas👋 Just ordered the 8 in round, wish me luck ya'll!!!! Any advice from other newbies is greatly appreciated 🫶💃👑✌️Or from the experts also😊

[@americancraftssweetshop]

Let us know how it goes!

[@SunflowerJadeCreations]

How did it go? I just bought mine and I’m doing mine right now :)

[@RedneckBeautywithDebra]

@americancraftssweetshop My apologies ladies I have not used mine yet (family emergency). I do look forward to using it and I will definitely show ya'll the results. Good, bad or ugly👋😁

[@MelovesPugs]

Should make the cake cutter with stainless steel. Cuts better than plastic.

[@jewelempress9134]

This plastic worked perfectly for me i had no issue

[@buschenkomarie]

The plastic cake cutter tore up my edges just as you saw how her's slightly tore up. This plastic cake cutter is horrible! I am going to find a steel band that is thin and sharp. I'm guessing they changed the design of this and this is why the plastic cake cutter is not working. Plastic is thicker than the metal ring/cake cutter, so it doesn't cut the cake to the size it needs to be and you're not left with much room to pour the frosting in. I'm so sorry I didn't buy this from another competitor.

[@robantif]

Ruined the cakes! The plastic form doesn't work at all.

[@FranklinandFig]

Is this an 8” kit?

[@americancraftssweetshop]

We sell both an 8" and 6" kit!

[@jessierodriguez9544]

What kind of chocolate do we use

[@americancraftssweetshop]

​@@jessierodriguez9544 Hi! It is recommended to use chocolate that contains cocoa butter if possible because it melts the best. The higher quality chocolate you use the better results you will get. But the key is to get your ganache to a stage that makes it pourable. On our channel there is a recipe for butter ganache that works great for the frost form!

[@jessierodriguez9544]

@acfoodcrafting thank you and the cream high in fat too right that what I heard

[@jessierodriguez9544]

@@americancraftssweetshop can you use chocolate melts for it

[@Наталья-ю4й4в]

Как купить вашу продукцию?

[@americancraftssweetshop]

В настоящее время мы продаем его только здесь, на Amazon: a.co/d/6Et0emw

[@santyv05]

Dónde se puede adquirir el kit?

[@americancraftssweetshop]

www.amazon.com/Frost-Form-Professional-Quality-Food-Grade-Decorating/dp/B0CMW5LWZ1?ref_=ast_sto_dp&th=1

[@lorelai_living]

This was very hard to watch. Very dry.

[@ajorquez]

She resembles Khloe Kardashian before her face alterations 😅😂

[@clistagussler270]

Sadly you guys sold out on Amazon 💔

[@sharonshumpert1917]

I was able to duplicate with cake acetate collar and a round cake pan with removable bottom. Same premise and a fraction of the cost but still a nifty tool for some.

[@kaylaaa6351]

​@@sharonshumpert1917 I can't thank you enough for that information 😂

[@dbarnes66]

@@sharonshumpert1917what acetate do you use?

[@nickroethke9410]

😴