A DIY antenna kit from Coffee and Ham Radios 9 1 EFRW.

Рет қаралды 6,867

Күн бұрын

In this video I build the new 9:1 antenna kit from Coffee and Ham Radios. Be sure to watch everything I make a mistake and tell what I did wrong, ham radio is about learning !
The Ares 9:1 antenna kit is now available!!
Where to get your antenna, coffee-and-ham-radios.square....
*****Tools that might help make building easier!!*****
As an Amazon affiliate I may receive a commission on some items sold (check for coupons)
Blue Flush Cutter , amzn.to/3Vtkv9w
Helping hands, amzn.to/3ANTjsR
Hakko FX888D-23BY Digital Soldering Station, amzn.to/3LSLmZC
KESTER SOLDER , amzn.to/418ceZP
Liquid Electrical Tape, amzn.to/3AR8m4V
24" x 36" GREEN/BLACK cutting pad, amzn.to/3LRNKzF
WORKPRO 39-Piece Drive Socket Wrench Set, amzn.to/3NyaKFl
10-Piece Precision Screwdriver Set , amzn.to/42opnPy
Felo Automatic Wire Stripper, amzn.to/3LvLrBd
Klein Tools 11061 Wire Stripper, amzn.to/44nQ9cF
Klein Tools 11055 Wire Cutter and Wire Stripper, amzn.to/42mTvuQ
Klein Tools 1005 Cutting / Crimping Tool, amzn.to/3oYbidc
Klein Tools 3005CR Wire Crimper Tool, Ratcheting , amzn.to/3HxJvqn
#CAHR, #antenna, #9:1antenna,

Пікірлер: 15

@KS0JD Жыл бұрын

I like the look of the build and the finished product, You can always say "Ape Tested and Ape Approved" 73

@LeeMcc_KI5YPR Жыл бұрын

As of 9:55am on Star Wars Day, only Mercury and Apollo are on the website

@KK6USYHamRadioAdventures Жыл бұрын

The new antenna will be up soon, please check back.

@TheSmokinApe Жыл бұрын

Nice job 👍

@KK6USYHamRadioAdventures Жыл бұрын

Thanks Ape

@t.j.speakman7723 Жыл бұрын

Looks good Chuck. Thank you

@hamradiowithkevin Жыл бұрын

Music is a good thing, and it keeps us relaxed while watching. Nice build chuck.

@KK6USYHamRadioAdventures Жыл бұрын

Right, yea I like a little music, Thanks Kevin!

@donaldsmith3048 Жыл бұрын

I only have trouble with music as you are talking. Sometimes it makes it hard to understand. You did that but the music was low enough that it wasn't covering up your talking. I don't understand why all the kits are QRP! I ordered some 240-43 so I can use them for 100 watts all day! I like that winder, looks strong enough to hold up going out to many POTA. It is human to make mistakes. If that was the biggest problem that day you are very lucky! 73 W4DES

@KK6USYHamRadioAdventures Жыл бұрын

Hi Donald, are you doing 100 digital? You should be able to do 100 SSB and 50 watts FT8, one of our winders with a 240 it's tight but doable. I grabbed a 240 and winder it hangs over about 3/16" on each side. We have a larger winder in the works but the nylon printing is really expensive and we were waiting in hopes it would come down. Thanks for watching!

@donaldsmith3048 Жыл бұрын

@@KK6USYHamRadioAdventures It looked like a small Toroid and have seen where the small ones overheat doing 100 watts SSB over time. It also looks like 9 turns on there was hard to get them all on there without overlapping wires.