G Body Supercharged LS Swap *Magnuson 2650*408ci*4L80e*

This Monte Carlo came back for a Magnuson 2650 Supercharger to be installed on its 408ci LS Swap. We installed a trans brake in the 4l80e transmission that still retains the automatic shifting.
Doing your own G body LS Swap? Get all the parts we use on our G Body Ls Swap Kit here -
zerotosixtyperformance.com/sh...
Not interested in a kit but want all the part numbers? No problem! Go here to get the complete list of part numbers -
zerotosixtyperformance.com/sh...
Have a question about your LS Swap? Shoot us a line below
Thank for watching! Like what you see? Like and Subscribe!

[@bigdaddy24811]

Yes sir please keep the videos coming 👍🏾

[@Gor1llaK1ng3]

The trans brake and line lock is very unique

[@guffgorilla]

Very nice setup!

[@dannyyarbrough8018]

This is tge exact build i wanna do

[@kingofkings8709]

It could Definitely be a sleeper minus the sweet whine of that supercharger.

[@anthonyarnold906]

Want to build something with a similar setup myself. Want to try and stay with a crank driven power adder just for tunability since I’m new to all this

[@Zero2SixtyPerformance]

Forced induction is forced induction. They all have their downfalls. If you have questions feel free to ask!

[@Dane33781]

Very cool car! Who builds your transmissions? Lol

[@michaelwise9656]

What’s a good affordable set of headers that work great in a gbody 87 cutlass?

[@sixx6sixx107]

This is nice asf

[@Zero2SixtyPerformance]

Thank you!

[@dannyyarbrough8018]

I wanna see more videos on this car

[@Zero2SixtyPerformance]

Lucky for you we are doing a 10 rib conversion and throwing it back on the rollers

[@bryanlouisG-BuAction]

Can you use the the dirty dingo low mount ac bracket setup with the mini ac which hugs the block pretty tight in a g body without having to notch anything

[@Zero2SixtyPerformance]

I can’t confirm that it will or will not but I doubt it

[@InksterLoyalty]

What heat exchanger?

[@tarellowen-nu8jf]

I have a Monte Carlo ss 88 I want this same set up , if I use a 2 inch cowl hood would that clear everything to close it so I don’t have to modify it or have to cut the hood to fit the magnuson in there ?

[@Zero2SixtyPerformance]

You are going to need bigger than 2 inch. The place were you run out of room is up front. The snout is way up there. A 2” would work if it wasn’t for that

[@carlosfranco9129]

What's the rear gear ratio on the 9" and what's the torque converter setup?

[@Zero2SixtyPerformance]

3.73, FTI 3200

[@ProudlyNobody]

What radiator do you recommend for the g bodys with higher horsepower and forced induction?

[@Zero2SixtyPerformance]

We use a lot of norther radiators. Look for something with large rows not the amount of rows.

[@johnzeek4731]

Have you weighed a G-body after an LS swap?

[@Zero2SixtyPerformance]

Can't say I have

[@jorgemarquez7637]

What ac compressor bracket are you using part number? Thank you

[@Zero2SixtyPerformance]

Holley 20-140

[@duckinb1104]

Is this supercharger good for everyday use

[@DjDesignStudios]

Absolutely. It’s always there when you need it.

[@kanoberger9021]

I want to swap a 1974 cutlas to ls 6.0 any suggestions?

[@Zero2SixtyPerformance]

The 6l is a popular choice. Any 2500 silverado, yukon or escalade will do

[@Force1don]

Will the factory hood be able to fit?

[@Zero2SixtyPerformance]

Not even close

[@22sorbeta]

Nice clean swap. How much does a build like this cost?

[@Zero2SixtyPerformance]

If you are talking the entire swap.. like drop your car off, drive it home… 46k out the door

[@alvinfanning1666]

does magnason supercharger require dish or flat top pistons

[@Zero2SixtyPerformance]

The supercharger doesn’t care what pistons are in the engine but you would want a dished piston to lower the compression

[@halfsuperset19]

Will that blower fit on an LS 2 or a LQ4

[@Zero2SixtyPerformance]

Yes with an adapter

[@realshidd3062]

I have a 1984 luxury Sport Monte Carlo with a 6.2 6l80e swap And Ford 9 inch rear. How much would you charge to install on my car? I am looking to have it done Beginning of spring

[@Zero2SixtyPerformance]

You typically have 10-11k in additional parts labor and tuning to complete a swap

[@sixto7217]

@@Zero2SixtyPerformance I have a Monte Carlo that needs to pretty much be built up from the ground… how much do you think that’s be? Around 20k?

[@DjDesignStudios]

@@sixto7217 yessir

[@7thfleettrucking]

Where are you located

[@darrellhughes6773]

Wat mufflers did U say they are?

[@Zero2SixtyPerformance]

Flowmaster FX

[@SoftiesTruck]

Hey homie, use that seatbelt! Shit happens quickly

[@Kayaan_thegreat]

Where and how do i order magnason fully put together ready to throw on engine

[@Zero2SixtyPerformance]

You are just looking for the head unit? What all are you looking for?

[@Kayaan_thegreat]

Yes unit

[@dforest8539]

408 compression? Heads?

[@Zero2SixtyPerformance]

If I recall it was around 10:1 and TFS heads

[@jimwill95]

Do you have to use cowl hood now

[@Zero2SixtyPerformance]

Yes

[@jimwill95]

Would any pds supercharger clear stock hood or would you need to go centrifugal ?

[@jayblackrosier3301]

Where u get radio from ?

[@Zero2SixtyPerformance]

www.retromanufacturing.com/

[@kennardrhodan1746]

What state are you working from

[@Zero2SixtyPerformance]

Florida

[@desmondupshaw85]

Can you do a gbody swap for 6k everything included parts and labor

[@Zero2SixtyPerformance]

Not a chance. You will have 6k in just parts.

[@traybutts4425]

What better to install 4l80e or 6l80e

[@Zero2SixtyPerformance]

I am more of a fan of the 4l80e

[@menogusta9829]

4l80e in a car/high performance, 6l80e in a towing/heavy duty/mpg situation imo

[@Bball128]

How much for the coolant tank?

[@Zero2SixtyPerformance]

It was fabricated for this project. If I did it again probably $500.

[@mr.kingyosh4755]

I got a el camino

[@brianmathew09]

I've got an El camino...

[@mr.kingyosh4755]

@@brianmathew09 thank you for the grammar correction. Lol

[@chevyboyz09]

Wanna take on another one

[@Zero2SixtyPerformance]

Ofcoarse!

[@Officialfishtailmedia]

I'm building a 6.0 now I would love to pick your brain

[@Zero2SixtyPerformance]

Give us a shout. 727-346-8919 or [e-mail]

[@bowtiesandblessingsperformance]

I have a couple for you to do for me bro.

[@Zero2SixtyPerformance]

Send'm down!

[@darrenscales6046]

How much power did that set up make to the crank

[@Zero2SixtyPerformance]

We did not have put the engine on an engine dyno

[@duckinb1104]

How much for an engine build like this

[@Zero2SixtyPerformance]

Just the engine or a complete swap? If you are talking about the entire swap, roughly $45k installed.

[@duckinb1104]

@@Zero2SixtyPerformance complete

[@Zero2SixtyPerformance]

Complete

[@adrianwilliams1376]

Where are yall located

[@Zero2SixtyPerformance]

St. Petersburg, FL

[@adrianwilliams1376]

@@Zero2SixtyPerformance cool I have a question do u yall have motors in stock or would I have my on motor .

[@Zero2SixtyPerformance]

We supply everything

[@adrianwilliams1376]

@@Zero2SixtyPerformance wow ok do u have a number I can reach u at .

[@Zero2SixtyPerformance]

7273468919

[@392BlackJack]

My brother built that car from scratch why are you taking all the credit.

[@theshark2804]

Because your brother is not

[@hatterassportmechanic5621]

Woop de do,another l s engine swap,boring

[@ICONBADGTA]

Oh look! (ANOTHER BORING LSX SWAP)...... WOOPITY DOO! Seems like a every day thing anymore. No "CREATIVITY" anymore.. Just buy a LSX and bolt this to it..