I had wondered for 80 yrs how "test" indicators worked. But I never tried to figure it out; but I always was fascinated with these machines. Today our "Mr Pete" solved that for me. How great. Praise Jesus for you. "So" Lyle proved the old adage: "It is never too late to learn". Thank you kind Sir and always remember HOW many love you. Make ALL the videos you wish. We will NEVER tire of your genius makeup. NONE FINER!
@rickmartin45422 жыл бұрын
Hello sir, my name is Rick ,I’m 62, and 3 years ago I bought a SouthBend 9a 4’ bed. I also have a mill drill. I try and pick up used tooling whenever and wherever I can. I just had to let you know how much I appreciate your way of teaching, and sometimes I watch you just for the joy of it. Please don’t stop, thank you
@mrpete2222 жыл бұрын
Thank you very much for watching
@AmateurRedneckWorkshop4 жыл бұрын
Great collection of old tools. And we think we cannot get anything doen without our digital tools.
@Siskiyous64 жыл бұрын
Saturday morning coffee is always better with your work to inspire my day
@LeonFelixRusso4 жыл бұрын
@4:33 - This is a Carlton ''FILE - O - PLATE", a combination chainsaw sharpening guide, for correctly setting 1) Cutter angle of 30 degrees, 2) Raker tooth (depth of shaving), and 3) Correct file size on a .325 gauge cutting chain.
@not2fast4u2c4 жыл бұрын
If I would have had all those little gadgets when I was a kid..I would have had more fun with it than I would have with toys
@lathammarx145810 ай бұрын
That was a very nice gift of little tools, lookin thru the comments it looks like most of the items were identified. Enjoyed the double ended indicator, very cool. Thanks Tubalcain!
@canuckloyalist46814 жыл бұрын
It looks like a cartridge neck chamfering tool used in reloading at the 5:47 mark.
@rrabbit19604 жыл бұрын
That's what it is! I have type same type made by L.E. Wilson on my reloading bench.
@ominguti63454 жыл бұрын
I just loaded comments to say exactly that :-)
@cojones85184 жыл бұрын
5:48 Looks like somebody broke the guide rod off in it though. There's suppose to be a rod that goes down into the cartridge neck to keep it centered.
@Siskiyous64 жыл бұрын
@@cojones8518 not all of them are made with that feature, the ones for benchrest type loading have them, but the ones intended for general reloading do not.
@williamthrasher85404 жыл бұрын
I agree
@danbreyfogle84864 жыл бұрын
When my Dad passed away in 2016 I took the lead in cleaning out his basement workroom as well as his radio shop where he worked from 1947 until the day he passed away at 90. And like this collection is was amazing to look at all the little bits and pieces of tools he had collected for his work. Like this he had little lenses from movie projectors as magnifiers to aid in reading schematics and small part numbers on electronic items. And he had tuning forks like those you showed. In Dad's case they were for tuning old fashioned vacuum tube organs (like in churches). Now the curio, remember magnets could be glued to the back to make the tools stand up properly.
@SteveSummers4 жыл бұрын
That's one of the neatest indicators I've see. Thanks for sharing. Love the little plumb bob as well. Fits the type of work I'm doing at the moment.
@air54plane4 жыл бұрын
you're the only person that takes time to all of this and more!!! I love watching you"er videos.
@mrpete2224 жыл бұрын
Thanks
@RRINTHESHOP4 жыл бұрын
Nice shirt, and pile of tools. Tubing deburr tool, I have one somewhere. Love the Koch indicator, so simple.
@pjhalchemy4 жыл бұрын
Me too on the indicator but I believe there was a lot of engineering went into the mechanism and distances between pivots and the scales. And what about the backlash in the cam/knotch...very cool though!
@timeflysintheshop4 жыл бұрын
Glad to hear that you are not quitting. Thank you for the show and tell. Those are fascinating small tools. You really should finish the curio tool display. On the back, you should put a description of what is in the spot on the other side. That way if it ends up as anyone elses possession, you can still educate them!
@mrpete2224 жыл бұрын
Yes
@carlwhite82254 жыл бұрын
Mr Pete, those are some pretty neat old tools, they sure do not make things like that anymore, Thank you Sir for sharing.
@oldhick90474 жыл бұрын
Pete I think the double ended cutter is used in reloading ammo. It is used to bevel the inside and de-bur the outside of the case mouth. Or maybe it's something else.
@jerrywallis5994 жыл бұрын
I have two of them and that is what they are.
@patrickdavies65144 жыл бұрын
Bang on.
@TheAyrCaveShop4 жыл бұрын
Enjoyed the morning coffee cool tiny tools episode....that Koch & Son dual indicator is incredible, considering how much hand work must have been required in manufacturing. Was probably a pricey item in its day... Thank You Mr. Pete.....
@kevinkoepke83114 жыл бұрын
Until someone explained the chainsaw sharpening guide, I couldn't remember where I had seen it. Got one in my toolbox. Thanks again my friend.
@clifffiftytwo4 жыл бұрын
Like others I recognized the inner/outer deburring tool as one useful in cartridge case reloading when trimming cases. It occurs to me it would be useful when cutting copper tubing as well.
@OthamJohn4 жыл бұрын
Keep them coming please. Allways look forward to another session at school...
@roylucas10274 жыл бұрын
Another fine video. Nothing earthshattering, but certainly enjoyable watching with morning coffee. Looking forward to your next visit.
@tuffymartinez4 жыл бұрын
Thank You Lyle...How we seem to collect so many odds and ends in a lifetime of working...LOVE IT !!!!!...Looks like a small drawer of my many old Gerstners...Lots of Neat-O stuff to be handed down or just thrown away by younger folks that just do not care...I CARE & THANK YOU LYLE ...MORE PLEASE!!!!!!..TM
@samrodian9194 жыл бұрын
The steep angled countersink is for after trimming cartridge cases to length is to give a slight bevel to the inside and outside of the cartridge mouth. Used by those who re-load their own ammunition. It may have the name Lee or RCBS or Lyman on it as they all make them.
@labrat73574 жыл бұрын
I don't reload any more but I still kept this little demurring tool as it is handy to have. Mine was marked as an RCBS product. All the best.
@bobvines004 жыл бұрын
Lyle, seeing the small handbook of useful tables with the math tables reminded me of an incident in my early career. I was a Tool Designer and spent a _lot_ of time in the Tool & Die Shop going over designs & drawings with the Toolmakers at work. This was in the early '80s. One of the most senior Toolmakers was using his trig tables as I (in my early 20s then) walked by his workbench and stopped & asked why he was doing that. He only owned a 4-function calculator. I told him that he could get a "new" calculator with trig functions for $10-$15. He didn't understand that he would no longer have to look up data in the trig tables to be entered into his calculator. When I finally got him to understand that the equivalent of his trig tables (plus more) was "inside" the "newer" calculators, he literally staggered! It was one of those "light coming on" moments! ;)
@mrpete2224 жыл бұрын
That’s a good story
@oldhick90474 жыл бұрын
Thank you for the show and tell sir. Love the little tools.
@4GSR4 жыл бұрын
One thing I like about your videos on this kind of stuff. You learn something about the unusual tools by the many comments posted by others that know something about it. To me, very educational-shop related. Ken
@gig19584 жыл бұрын
Mr. Pete, the sort of horseshoe shaped item with the riveted spring clip is an attachment for a analog (non-digital) height gage. It clips on to one (or any) of the indicating steps and provides a surface to gage an underside surface. I know that the one we used for years in the shop had "steps" finished on both surfaces but I have one by Cadillac Gage that has one of these. I know what the piece with the string wound around it is but will keep silent in case you want to show it later. Matthew Onks
@dannyl25984 жыл бұрын
Thanks Mr Pete. That's some pretty neat stuff you got there. That little glass puck looks like an optical flat, I have one that came in a set of gage blocks. Tom Lipton did a video on them. I played around with the one I have and was surprised to see how it works. If that is what it is I think you will find it interesting too. Thanks
@TheKnacklersWorkshop4 жыл бұрын
Mr Pete, I definitely think you should complete the cabinet with all the old interesting tools. You have so many to pick from, to have the top 20 in one place would be great. Keep the video's coming. Paul,,
@shanematthews92204 жыл бұрын
Mr Pete. The cylinder shaped object is a reloading accessory. Used to remove burrs and chamfer the inside and outside of a cartridge mouth. Usually used on brass cartridges. The string object is a rifle barrel pull thru. Carried in the rifle butt trap. This is a steel one for WW2, Brass ones made for WW1. However some left over brass pull thrus were still used in WW2. The metal unscrews. One end is a weight to drop through the barrel, the other end has a slot for a patch. It also has a female thread for a GI bore brush. By the way yesterday, Friday, the temperature in the afternoon was 101 with heat index of 107. Here in Central Florida. No place to hang out!
@garyc54834 жыл бұрын
Hi mrpete a really nice gift of all the small tools. Although the little double ended indicator was a gem the item that caught my eye was the Lufkin tapping drill & decimal equivalent round calculator. Here in the UK I have a huge collection of mechanical calculators (pre electric) Slide rules and rotary calculators. I have several hundred rotary calculators covering many subjects. I have M&W, Starrett, General etc etc but not a Lufkin one of any kind. I would love to add that one to my collection. Thanks for sharing. Stay well stay safe. regards from the UK
@ernestbastide19704 жыл бұрын
Ernie Bastide Thank you so much for your video, please keep them coming.
@craigtate59304 жыл бұрын
Cool old tools. Wish they could tell there stories. I bought an older version of machineries handbook back a few months ago. Little did I know it had the name and address of its previous owner. It would be so cool to communicate with the previous owner (if hes still alive of course) and hear about his work, and let him know his once loved book is in good hands
@mrpete2224 жыл бұрын
👍
@cdp2004424 жыл бұрын
Sir your my favorite channel by far on KZbin. Brings me back to better times. My shop teacher was us young men’s favorite. Had fun while Learning my future trade in plumbing/ HVAC JOB . THANK YOU 🙏🏽
@stanervin61084 жыл бұрын
I am familiar with the two cutting tools at about 5:45 . For trimming empty brass ammo cartridges. The double ended one is for trimming and deburring the cartridge on the larger opening to ensure the proper fit of the lead. The smaller one is to dress up the primer pocket. The ones I used were branded 'Hornady'. Some nice miniature goodies you have there, Lyle.
@mikemoore97574 жыл бұрын
Canuck Loyalist is spot on at 5:47. It is a deburring reamer for taking the whiskers off the Id and od of brass cartridge cases when reloading. It can also be your best friend when doing alot of tubing work on the lathe.
@martinstreets73774 жыл бұрын
Hi Mr Pete, My late uncle had a 0 to 0.500 micrometre he was a master carpenter and at one time manufactured piano parts he always called it a piano makers micrometre. Regards Martin.
@silverbullet74344 жыл бұрын
Lyle the double end cutter is for reloading brass shells so bullets fit in the shell and the shell fits in the guns chamber... It only takes a few spine by hand to make the brass ready to load.
@panjandrum.conundrum4 жыл бұрын
1945, studying machining at USC, probably a returning soldier, possibly even disabled. As for the tuning forks: 1) is marked "460.9 internat" which refers to B-flat when you use international tuning (A=435 hz instead of our usual 440 hz) 2) "concert" is "concert A," the 440 hz widely in use today (unless you play on original period instruments, then many use a lower pitch just to make it more tedious) 3) is another international frequency, can't quite read it.
@sluggo20144 жыл бұрын
Thanks Dave
@bigmikeh58274 жыл бұрын
Mr Pete, thank you for sharing. In all my collections I alway wonder what stories could these items share if they could talk. That mic would tell us about the person, the trade, the location, the projects, the company. Sometimes they do tell their secrets with markings or the owner helps. I admire the craftsmanship, the indicators of use, and care. Especially when I place them next to a currently made tool. Again sir, thank you for sharing and be safe.
@RyanWeishalla4 жыл бұрын
Nice set of small tools. I think you need to get one of your woodworking buddies to make you a glass topped coffee table that you can use as a display case so the tools can lay in it. Well, with all of your tools, you might have them make it into a kitchen table...with additional leafs for expansion.
@blackdog.63984 жыл бұрын
Thank you 🙏 ...
@lugergsd92824 жыл бұрын
Hey Mr Pete! Long time viewer, love your videos! That thing you held in your hand that looks like a countersink on one end, the other end is basically the reverse of a countersink... that’s a reloading tool. When you reload your own bullets, you typically need to trim the shells to length because when they’re fired, they expand in the chamber of the gun. So when you reload, you trim the case to length and then deburr it with that tool. It lets you deburr the inside and outside of the opening of the of the bullet casing. So it’s easier to handle of course but also it makes putting the powder in and seating the projectile easier. Awesome video, as always sir, keep up the great work!
@andyZ3500s4 жыл бұрын
Mr. Pete the little micrometer looks the same as Brown & Sharpe 's 1885 version. I know that this one is patented 1884 but Look for it on page 9 of the 1941 Brown & Sharpe catalog that you always show.
@MrUbiquitousTech4 жыл бұрын
Cool assortment of little tools, very nice of Dave! The workings of that double ended indicator is fascinating; you're right, it's amazing what people used to do and with far less then we have today. (Except brains, I think there was more of those back then.)
@raymuttart54844 жыл бұрын
Interesting for sure, thank you.
@bluegrallis4 жыл бұрын
I found one of those Starrett RPM gauges in an old tire patch container in my Great Uncles stuff. He used it to set the speeds on the combine when changing from one crop to another. An old fellow came and borrowed it one day, because Uncle Sam used to let him borrow it every time he re-set his combine. The fellow passed away before he got it back to me and I believe most of his possessions were shoved in a hole in the ground when they dozed of his whole farmstead.
@Louisg11004 жыл бұрын
Thank you for the show and tell. The tool with the countersunk on one side and the deburring tool at the 5:47 mark is used for deburring the inside and outside of rifle cartridge cases after trimming to length
@tonylenge4244 жыл бұрын
I am thrilled that you plan to make more videos. Thanks
@BradsWorkbench4 жыл бұрын
Cool little box of stuff
@davescreations77934 жыл бұрын
I enjoyed this video a lot thanks Mr Pete
@philrueff14024 жыл бұрын
Awesome Video Mr. Pete! Love the little tools and the patent drawings are always so interesting. Keep 'em coming!
@123232ism4 жыл бұрын
love the curio case...
@SuperBowser874 жыл бұрын
Really enjoyed. Thanks for sharing!!
@kelkel32014 жыл бұрын
God Bless Mr.Pete very interesting pieces you got there! My favorite: the double mechanism indicator w/ the slide plate!
@drgreenthumb8137 Жыл бұрын
I just scored one of those 0-.500 starrett micrometers at a flea market for $15. It’s in excellent shape with locking box.
@blipblip884 жыл бұрын
Figures you'd get a gauge with Dave Clark's name on it that came out of a box of Bits And Pieces..
@charlieromeo76634 жыл бұрын
Nice touch.
@dianemcewen89224 жыл бұрын
I own a mint 2 inch mic with the same patents dates as the 1/2 “ you have ,mine is a brown and sharp thanks Mike
@garandm1d4 жыл бұрын
Excellent video, as usual,....@ 5:44 the tool in question appears to be a chamfer tool for metallic cartridge reloading, in the reloading process brass cases need to be trimmed to length due to the fact that they tend to grow in length in each firing. After trimming to length you need to remove the burr on both the inside & outside of the cartridge case.
@dennismichas2854 жыл бұрын
Thanks Lyle, another interesting video. I was given a 0 to 12.7mm Mitutoyo outside mic, also think it's quite cute👍
@pjhalchemy4 жыл бұрын
Thanks Mr. Pete and Dave Clark...great bits of cool tools & odd bits. More Please...this felt short for some reason. The history of the tuning fork is quite interesting and particularly how the frequencies were arrived at for the modern scales and all the way to fax machines. (John Shore 1711"Pitch Fork") Loved that Koch indicator too.
@joeduda85074 жыл бұрын
Very nice tools glad you shared them
@elsdp-45604 жыл бұрын
THANK YOU...for sharing. Some really neat stuff.
@ericday6044 жыл бұрын
Good morning Mr. Pete! I must say that I really enjoyed this video. I really enjoy tiny tools, gadgets, and containers. I also have a very bad habit of buying them when i see them at the local antique shops. The koch indicator is just outstanding!! I will be watching for one of those, the workmanship is just amazing. I have a small micrometer like the one you have shown but mine is of poor quality as it is branded by and I guess sold by Woolworths, not the benchmark of quality!! Take care my friend, I will be watching for your next production.
@peteroleary94474 жыл бұрын
That thick fork shaped tool with the spring clip is for use with a Cadillac gage, sometimes called a Pla-Chek. It clips on top of the gaging discs so you can use your indicator for underneath measurements. That old screw gage may be made from German silver, otherwise known as nickel silver. Maybe it's a 300 series stainless steel and therefore non-magnetic.
@michaelfiller34524 жыл бұрын
Interesting tools. Weird coincident I was thinking about making a little curio along the lines of yours just this morning. There are three keys near the center of your box, look like railroad keys.
@mikenixon91644 жыл бұрын
Good stuff.
@slypig244 жыл бұрын
If you glued small magnets to the back of your wooden display curio box. The tools would stay upright, and you could still remove they when you wanted them..get strong rare earth magnets. Cheers from Australia 🇦🇺
@mrpete2224 жыл бұрын
Good idea
@bcbloc024 жыл бұрын
You have at least 24 more years to get your projects done. Get after it. :-)
@donmittlestaedt11174 жыл бұрын
The item with triangular shape and the springy clip is used on a Pla-Check. it is placed between the segments on the gauge column. The spring clip holds down the the item so the user can transfer the surface out so the measurement can can picked up from below by the dial indicator stylus for instance.
@tomburson57334 жыл бұрын
The round tool you found is a brass cartridge debuting tool. One end does mouth outside other end does neck od for reloaders
@americansewingmachineresto15454 жыл бұрын
Mr Pete, one of the items you couldn’t identify, it had the thick metal piece with the brighter metal arms attached to the top. It clips onto a height gage
@bnghjtyu7674 жыл бұрын
The indicator at 7: 40 seconds. I acquired one years ago from somewhere I use it in a test jig for bullet concentricity. It's a wonderful Little treasure.
@dereksstuff83954 жыл бұрын
The carlton gauge is a raker gauge, used in the sharpening of chainsaw chains. I've also got one of the odd double end cutter tools that was in a box of miscellaneous tools.... I've never used it.
@michaellenz91214 жыл бұрын
The double ended tool is for prep work on brass cartridges. Champher inside and out for reloaders. there is supposed to be a center pin in the female cutter
@jeffrobison20134 жыл бұрын
the cutter that looks like a little rocket is a de burr tool, I use one to de burr brass casings when reloading ammo
@georgecrego55354 жыл бұрын
The cutter with the state's deep deep cut angles on the back is for Shell trimming the front does the neck in the back of the outside of the neck
@Daledavispratt4 жыл бұрын
What a wonderful gift! Thanks, Mr. Pete! :-)
@IronAntOilpatch4 жыл бұрын
5:45 mark tool is for ID, and OD chamfer of Brass for reloading. Can ream the Primer hole with the ID end too
@4GSR4 жыл бұрын
A 1982 penny, might get 2 cents for it today. Almost antique!!! Thanks for sharing. Ken
@FastSloW-qt8xf4 жыл бұрын
The one item with the three horns on one side is for reloading. Its used for deburring the projectile end of brass cases
@jamesburriss10863 жыл бұрын
Tuning forks were used to check for loose paint on parts by hanging the part on a piece of string and touching the vibrating fork to it any loose paint over dirty or oily parts will pop off
@mrpete2223 жыл бұрын
That is interesting
@johnwatson46684 жыл бұрын
The item the looks to be a countersink on one end and an opposite countersink on the other is a rifle cartridge deburring tool, used to debur the brass casing both inner and outer edges during the reloading process before inserting the bullet.
@warrenuecker6833 жыл бұрын
Yeah, at the 5:47 mark, that's a tool for reloading brass cartridges. The 'countersink' end is used to chamfer the case so that the bullet doesn't catch on the case edge when it is seated, and the other end de-burrs the outside of the case. I think this is an RCBS brand tool, perhaps Lyman....
@billmarshall83524 жыл бұрын
hello, one of the tools in the cover picture that you didn't show (the tool with a black handle and springs in the side) is for removing watch hands!
@larryleek71413 жыл бұрын
The tool that looks like an inside and outside chamfer tool is for manually deburring cartridge cases after trimming them to length. Trimming leaves a sharp edge both inside and outside the mouth of the case so deburring is necessary to remove this.
@CraigLYoung4 жыл бұрын
Thanks for sharing!
@garyanvil23544 жыл бұрын
You never cease to amaze Mr. Pete...👍 Would you adopt me please
@labrat73574 жыл бұрын
At the 5.45 mark that is tool to debur the neck of cartridges that have been trimmed back to a length and have a sharp edge left around and inside the mouth of the case. Mine was made by RCBS.
@markowen71644 жыл бұрын
Good I'm happy to hear that. M
@dimitrioslykissas79814 жыл бұрын
The DIY plumb bob video is going to be a lot of fun. On the other hand, the people insisting Mr. Pete is a Freemason will have a field day.
@mrpete2224 жыл бұрын
Yes They love to harass me over that
@bobbrown39974 жыл бұрын
Wow! Two comments from me in a week. Lyle, the 3 tuning forks I believe was part of a set of chromatic tuning forks. I never owned a set as I tuned pianos by ear using only one fork.
@Opinionator524 жыл бұрын
That 2 ended cone cutter may be to make mating surfaces,,, and the tuning fork handle touched to the camera would likely transfer the sound... Very cool stuff!!! :o) O,,,
@PeterWMeek4 жыл бұрын
That one tool is an inside/outside deburring tool*. The eyepieces look like part of a set of oculars for a stereo dissecting microscope. I have one that my dad purchased as a young teenager with money earned doing odd jobs and selling a home-brewed salve door-to-door during the depression. The oculars look VERY similar to what you showed. Don't throw those away; if you don't want them, maybe we can trade something. ====== * After reading some of the other comments, I realized that I have one of those, packed away with all my other reloading equipment.
@ramsay194814 жыл бұрын
We had US "Hollowshaft" motors on deep well pumps where I worked for many years.. Mike in Louisiana
@hubertwhitlock99684 жыл бұрын
that countersink is for reloading and that's how you shamper your brass inside and outside when you're reloading bullets
@WhiteDesignsUSA4 жыл бұрын
5:42 is a reloading tool. It's for deburring and chamfering the necks and primer pockets of metalic cases.
@MrSjGibbs4 жыл бұрын
It deburrs the outside of the case neck and chamfers the inside so the bullet doesn’t get scratched, particularly around the base. A bullet is steered from the base.
@gordbaker8964 жыл бұрын
That Non-magnetic item may be Stainless. Great stuff from DC. You could possibly glue magents on the case to hold Ferrous Materials.
@aw7384 жыл бұрын
The counter sink tool is to chamfer resized cases when you reload them. It is used before the bullet is seated.