Рет қаралды 39,726
✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
Playlist: • Playlist
This video shows the making of 'templates' for backrest in 'stretchy vinyl'. Procedures are similar to what I did for the bottom seat bolsters.
The only 'key' is lay the material over the 'foamed body' and follow the already marked lines. As mentioned before... if necessary stretch the vinyl material just a little bit to give the desired shape.
The 'reference marks' would be of great importance at sewing/assembling time.
There are some marked/dotted lines on the concave headrest. Those were done as guides to mark/make on the base foam flat recesses where a strip 'hook side velcro' would go. The 'loop side velcro' would go on the reverse side of backing foam. After attaching them we would get a perfect concave shape(watch procedure next video)
The 'seat belt guides' on headrest template were marked and cut beforehand because the same figure would be done on leather material. That is the reason of making templates and not be guessing when the cover is put on.
I hope you find it useful,
Cesar