Sealey Trolly Jack 2001LERE vs Snap-on Professional Jack, Full Review & Test Low Entry Trolley Jack

Рет қаралды 9,584

Күн бұрын

Пікірлер: 50

@I-Love-Taylor-Swift 4 ай бұрын

Great vid (always nice to find a UK vid, as most vids on KZbin seem to be USA!) That Sealey jack seems to beat the Snap-On in every way (height, easier to jack up, weight, ergonomic).

@aaanton11 4 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

@GrandadPunchy 2 жыл бұрын

Morning Ant Great upload as always.... I've had 2 of the Sealey low profile 3 tonne Jack's (model 304OAR) since Oct 2019.... FANTASTIC bits of kit. Can't fault em..... Such a QUICK lift too & such an easy action. They lift the Truck like it's butter. Max height 533mm so definitely handy for the L200. You'll definitely enjoy using.. Stay lucky. Stay safe. Stay healthy. Alan L200

@aaanton11 2 жыл бұрын

Yes Alan, yours lift an extra 40mm with a bit more beef, I wanted something lighter, was considering the 1.5 tonne model as it looks very nice and its not often I will need anything larger my old yellow jack was 1.5 tonne and worked like a charm, Thanks for the great comments👍🏻👍🏻🛠

@PhantomMark 10 ай бұрын

I really like mine, I have a really low E46 M3 race car, and this is the only jack I found that could get under it, really nice bit of kit IMO.

@aaanton11 10 ай бұрын

Thanks for the great comments👍🏻👍🏻🛠

@gavjlewis 2 жыл бұрын

I have a very similar jack. The ultra low side skirts gets scuffed up and the paint chips off and rust forms. I had to sand it down and repaint it. Now it has tape on it and when the tape gets scuffed up I just replace it before it takes the paint off.

@aaanton11 2 жыл бұрын

I will need to be careful with this one then gav, hopefully it will last a few years, Thanks for the great comments👍🏻👍🏻🛠

@jonnysedge7412 2 жыл бұрын

I just bought a pair of 3000LE's, I don't think you did the inital bleed procedure correctly. Going by the manual it says to have the handle turned fully anti-clockwise and pump 20 times so the actual jack arm won't go up. Once you've done this on the last 20th pump on the downward stroke turn the handle all the way clockwise then you can use the jack as normal

@aaanton11 2 жыл бұрын

Mine works like a charm, Thanks for the great comments👍🏻👍🏻🛠

@mickeytheviewmoo 2 жыл бұрын

Nice jungle music as well. Good review. I bet the Snap-On still out lives this new kid on the block

@aaanton11 2 жыл бұрын

I think so! Thanks for the great comments👍🏻👍🏻🛠

@dannywhite1392 2 жыл бұрын

Ive just got this for a bargain £92.99 from euro car parts 👌. BTW your meant to bleed the jack with the release fully open, not closed ✅️

@aaanton11 2 жыл бұрын

Bargain Thanks for the great information👍🏻👍🏻🛠

@kevinking217 Жыл бұрын

I have the same old jack as you, but it always gives me back pain when I lift it. it is too heavy to move.

@aaanton11 Жыл бұрын

Yes the old one is so heavy, Thanks for the great comments👍🏻👍🏻🛠

@philipbunker146 2 жыл бұрын

Does the jacking pad remove, and if so what diameter hole is left for fitting a cross beam?

@aaanton11 2 жыл бұрын

The pad is bolted on, so not easy to pop off. Thanks for the great comments👍🏻👍🏻🛠

@peterthompson3369 2 жыл бұрын

Is the pad removable on the new Sealey jack? Can it take a Transmission adapter in a 30mm spigot?

@aaanton11 2 жыл бұрын

Unfortunately not, Thanks for the great comments👍🏻👍🏻🛠

@garrynutter860 2 жыл бұрын

Nice comparison, Looks like the Snap-on won on lowering. Looked more controllable.

@aaanton11 2 жыл бұрын

She is a beauty, the old skool snap-on is a rare commodity but the weight is an issue, its so dam heavy😂 and the low entry was doing my head in, Thanks Garry for the great comments👍🏻👍🏻🛠

@rabfraser1234 2 жыл бұрын

hi ant you cost me a fortune with these tools ,,,i would say that the Milwaukee hoover is the best tool ever love it ,can i ask i have a little aygo city bug its developed a problem when on motorway its sways from side to side as if its windy but it not too windy any clue,,, ball joints are ok track rod ends seem ok just thought with your knowledge with them you might have came across it before ,,thanks rob,

@rabfraser1234 2 жыл бұрын

thanks ?

@aaanton11 2 жыл бұрын

I would look more at the road surface, the trucks cause ruts in the road and the bugs wheel base sits right on the edges of these ruts, this can make the car move all over the place, Thanks for the great comments👍🏻👍🏻🛠

@rabfraser1234 2 жыл бұрын

@@aaanton11 thanks for that but I been on the same road for the last 2 years can't remember this snaking But it's OK when driving around town...

@w00t-w00t 2 жыл бұрын

Great video - thanks for bringing it to our attention! Just managed to grab one in an eBay promo for £120. Bargain.

@aaanton11 2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@jimbo9310 2 жыл бұрын

Great video ant well done and very informative thanks 😊

@aaanton11 2 жыл бұрын

Thanks for the great comments👍🏻👍🏻🛠

@MrZimmaframe 2 жыл бұрын

This looks identical to the Halfords Advanced one, but you get 3 years warranty with the Halfords one.

@aaanton11 2 жыл бұрын

Its very similar, the Halfords one is £200, is only 2 tonne, and there are differences in the build, Thanks for the great comments👍🏻👍🏻🛠

@MrZimmaframe 2 жыл бұрын

@@aaanton11 Yes 200 for the 3 ton halfords advanced. But £165.99 for the 2 ton which is more compareable to the Sealey's 2.25, 3 year warranty compared to Sealeys 1 year. I got my 3 ton Halfords Advanced on Black Friday and only paid £150 for the 3 ton, and I think the 2 ton was only like £120. The sealey is good for the price, i have noticed less weld on the rear wheel area and no weld join the the middle of the sealey. But both look like great jacks.

@Danme1987 2 жыл бұрын

I have returned 2 halfords ones as the rams were being scuffed internally and scraping the ram metal on metal. The jack worked ok but this will eventually kill the seals. I checked top and bottom with the Jack fully up.