ABU 506 closed face fishing reel - enable backwind by removing the anti-reverse pawl

[@MidlandAngler]

Thanks for this .. I've just stripped , cleaned and re assembled my first 506 .. minus the Pawl 😎🎣🎣

[@SteeeveO]

I did this about 45 years ago....before youtube, & I haven't a clue how I learned how to do it. Just planning to start reusing this reel for this season & use my fixed spool for lure fishing or feeder fishing only. I bet I won't be as successful as I was back in the 70's!

[@PhilSmithFishing]

Great informative video will have a go at mine now Thankyou

[@neilsmith7547]

Thanks for sharing this video. Really helped me 😊

[@simonfreear8466]

Great little video! Had it all done and back together in about half an hour! Been meaning to look into doing this for some time now and really pleased I found your video. Thank you so much! 🙂👍🏼

[@jimm675]

Thanks for a great video. Just picked up a 506 and this is a real help to understand the workings. Would love to see how you would do a full service on one of these if you get the chance.

[@tomcline8849]

Very informative, I have been looking for a video showing how to do this. Thank you for up loading it.

[@mickwilkes3397]

Very useful video, many thanks!

[@paulharrison3897]

Yeah good clear guide. Thank you for the reminder (I last did this about thirty or forty years ago 😮) 😊

[@pissedman1491]

Awesome video. I got one of those reels. I think its over 40 years old... still using it. It will probably never die.

[@dirtyhuca]

Superb best video out there just managed to fix my 506 after watching this it had been put together wrongly by previous owner

[@andrewpalij4691]

Nice one,just about to attempt this on a newly acquired one 👌

[@Rob-di7uu]

Can you also remove anti-reverse, from the newer 506 Mk2 using same method thank you 👏

[@WoodFarm-u9o]

really helpfull tnx

[@kimholland9316]

Good job

[@ericbusdriver5880]

merci pour ce tuto

[@markfarr8804]

i have an abu Garcia c506 mk2 can you please let me no how to fix sticking bail pin thx

[@anthonyavison9098]

Do you know where I can get parts aub 50

[@kevinhollis1143]

I have 2 of these. On the housing on the same side as the reel handle is a black button that pushed forward allows for both back wind and.forward wind, the modification in this video is separate to that function??

[@agfishing4898]

Yes, it sounds like you may have a different model (maybe a 1044?). In this case, the mod is not needed.

[@domenicobeltramo6407]

Buonasera. Dove posso trovare il disegno manuale dell' Abu 506? Grazie

[@lifeexperiences4969]

Got bit of play on the handle . How can that be sorted ?

[@agfishing4898]

Take it apart: 1: Is everything done up tight inside? 2: Examine the brass bush in the handle, I've seen them wear. Cheap to buy off eBay, or size up and match with one from a bearing supplier. 3: Look at the gears. If worn, possible to buy new old stock, but might be cheaper to buy another and make one out of 2. I've not come across one where the gears were badly worn personally.

[@antoniopapini2572]

what is that red lip on the spool?

[@agfishing4898]

Its a chenille pipe cleaner that I experimented with as an alternative to the standard stuff. Originally used to prevent the line from being caught behind the bell housing. I chose the brightest colour possible so that it would stand out if dropped in the grass while fishing.

[@ЮрийТеремки]

Сколько,в этой катушке, подшипников?

[@anthonyavison9098]

It's is 506