ACCU CHEK Active Glucose Meter How to setup and use

[@VikramKanwar]

You showed the relevant features and usage in a simple way. Very Useful. Thanks for making it.

[@learnbloodsugartesting]

Glad it was helpful!

[@arunbarman3307]

Demonstration of setting the devise was very helpful. Thanks.

[@laughterfactory2352]

Thank you so much for an easy step by step set-up. Mom tried to get it to work but couldn't, saw your video today and i got it done easily.

[@learnbloodsugartesting]

You're welcome!

[@cleffbarca]

Thanks for the video. I've had this machine for some weeks now, I have twice failed to use it properly. I almost lost hope of getting it right till I found this your helpful video

[@Samalady]

Dear Josh, Thank you for this informative video, it helps me to understand how this machine works in few minutes, I bought accu check active yesterday and I struggled to make it active and was intending to return it to the vendor, thanks for saving me from driving 30 miles. Greetings from Morocco Asmaa

[@learnbloodsugartesting]

Glad it was helpful! Thanks Asmaa

[@kimlanchin5970]

Thanks , your video helped me understand how to navigate the monitor and its settings quickly.

[@learnbloodsugartesting]

Glad it helped

[@IlangoKrishvlogs]

Thank you so much ❤ Shall we use the prick needle more than one time?

[@lucylucy4799]

Thank you so much for vedio I know how to use my device

[@MDBadrulAlam-et9wj]

I am Accu Chek owner i Don't know how to check the blood suger, this vdio has very help me... Thanks

[@alid1082]

This version has good Cass, hard case, good for travel, in other countries we don't have it

[@davidzond]

Thank you for the most informative posts. Can you reuse the poke pin twice for yourself??

[@learnbloodsugartesting]

It is recommended that you only use a lancet one time.

[@nazem3079]

You can! But it will be less sterile?

[@Glenda0220]

Can you charge the monitor or in addition you need to replace the battery

[@breath225]

Thanks you i actualy need it 👍

[@justinaikpe6715]

Mine shows Er-2 mean after placing blood on the test window. Please what does this mean?

[@barbaraday2542]

What does E-9 mean on the machi?n?

[@tallat8888]

I'm guessing you have figured it was for low batteries.

[@abdulsavanur890]

How many years expiry this machine ?

[@timothymcgrath645]

What is happening lancet is inserted and nothing shows on the screen. The battery is still good. Are the lancets no good due to humidity? Thank you

[@mdshovon3323]

What is the normal blood sugar level according to this machine?

[@ahmadshahab111]

Will it work without chips which I lost

[@learnbloodsugartesting]

The ACCU-CHEK Active meter I have does not require a chip.

[@lib0r]

The older version does. You can buy test strips with a chip.

[@GeraldineJoseph-bb4fe]

Geraldine How long after you've had a meal do you take a reading?

[@learnbloodsugartesting]

It is usually recommended to test 2 hours after a meal.

[@nazem3079]

1 1/2 to 2 hours post meal..

[@elxenomorph534]

Thank you so much!!! You explained everything so well!!!

[@learnbloodsugartesting]

Glad it was helpful!

[@amardeepghule8284]

Maximum How many times we can use the same lancet please ?

[@learnbloodsugartesting]

It is recommended that you only use a lancet one time.

[@fnuman]

@@learnbloodsugartesting Why it is not good to sterilize it and use it again?

[@rsarkar2130]

Can you please guide how to do setting for FBS, PPBS in device along with PC Setting

[@edwardjames_8]

What amount of blood are we supposed to put & where specifically do we place it

[@learnbloodsugartesting]

The blood is applied to the center of the green area on test strip and uses 1 to 2 microliters of blood ( a good-sized drop).

[@nazem3079]

Use of small drop on the green area! You may watch the demo video again.

[@csuresh8980]

Accuchek strips not working properly, green spot colour faiding and getting error before its expiry date...

[@learnbloodsugartesting]

If the bottle is left open for an extended period of time or if the strips have been exposed to excess humidity or extreme temperatures, they may no longer work properly.

[@ahmadshahab111]

Let me know please if I purchase strip and don't work then it will be loss

[@learnbloodsugartesting]

It depends if your meter requires a chip, the one I used in the demonstration does not require a chip.

[@EleazerNwachukwu]

How do I change the battery

[@elizabethrodrigues7651]

I am using the machine after more than 3 months , inspite of putting new battery, there is no display of blood drop when new strip is inserted.

[@joshnamuruvan4038]

I also have that problem

[@EdwinaIkhinmwin]

Experiencing same

[@loisjoel9023]

Sir please where exactly did you put the drop of blood is it directly on the green shade of the test strip?

[@learnbloodsugartesting]

Yes, the blood is applied to the center of the green area.

[@malaaggarwal4399]

Dear sir, am user of accue check glucometer, since long . Instantly appearance of sensor'red light stooped . Pl. advise , how to correct it. Regards.

[@nazem3079]

Read the quick start guide! You may need to repeat the test?

[@nazem3079]

Thsnx..Very helpful indeed!

[@keshavareddy.ballukeshav6592]

Why my machine showing E-1

[@ibrahimhanif6436]

That’s not accu check ..it’s onetouch ..it means there is a problem with the machine system..repeat the test ..make sure you do it properly

[@ritaenu4556]

When would I get a response to my question

[@barbaraday2542]

I would like to know know what doese-9 mean .the strip is in place evenwith the blood on there there's a E-9

[@learnbloodsugartesting]

It's not listed in my User's Manual, however E-9 can mean low battery for other Accu-Chek meters.

[@prajaktaranade5814]

I am using this machine after some time. After the setting is done when I insert the strip , nothing comes up on the display. What should I do ?

[@splendor10]

Same problem for me. It is showing E1 on display. Did you found any solution?

[@playmary123]

im using similar device, when i was putting blood on the strip it wouldnt work, only the yellow line should be filled . Try to place the blood only on the colored part of the strip and nowhere alse

[@srimoyeesarkar1648]

Hi did u get a solution? I am facing the same problem

[@UchennaChidinmauju]

What is the normal reading for blood sugar level

[@dieharduk4021]

The expected values for normal fasting blood glucose concentration are between 70 mg/dL (3.9 mmol/L) and 100 mg/dL (5.6 mmol/L).

[@learnbloodsugartesting]

Here is a video where I discuss typical readings kzbin.info/www/bejne/hWjPZKSdZb9nfac

[@estherodunze338]

I actually use this recently and the reading showed 44mg/dl. I wasn't ok with the result so, I borrowed from someone and it showed 5.6mol/ . What should I do?

[@karloskarlos2578]

What about accu-chek insta. Can be more better than this accu-chek active?

[@rahulsinghgamerr]

my machine is showing double digits and not triple for e.g 10, 17 .. what could be the problem?

[@De-EttaEntertainment]

Could you please explain the glucose test results

[@learnbloodsugartesting]

Here is video from my other channel that explains blood glucose readings. kzbin.info/www/bejne/hWjPZKSdZb9nfacsi=iW6odCAV9hWLx5P3

[@ankitamahadik-g8m]

Accuchrck active pen is not prick on 3 no then what to do

[@candybalais7020]

How do we know when is the expiration date of the strips?

[@learnbloodsugartesting]

The expiration date should be printed on the vial of test strips.

[@susanadie468]

Hi, can I change the reading unit from mg/dl to mmol/L? Thank you.

[@learnbloodsugartesting]

No, the unit will only measure in the units shown on the back of the meter.

[@amrutshankarlalgundecha6047]

My machine shows E-5 error,what's the problem

[@kaabsahad]

How do I change the reading to mmol/L ?

[@learnbloodsugartesting]

That is preset, you cannot change it.

[@armandohinostroza9459]

I need help to change the reading units.

[@learnbloodsugartesting]

They are not adjustable, it shows on the back of the meter which units it measures in.

[@chinyeakafavour7343]

God bless you sir

[@steveh6170]

Can the settings be changed to mmol

[@learnbloodsugartesting]

No, the units are preset, the meter will only measure in the units that are indicated on the back on the meter.

[@christianwilson8949]

Dear sir, I am a regular user of accu-check active machine. It suddenly develop a fault when you put the strip on the machine it shows E-1, what could be the problem?

[@Mirujit89]

Setting the year is very difficult..its showing 2029 and can't reduce it to 2024

[@abinashkumar2199]

Hallo sir mere mesin light nahi jal raha h plzbataeya

[@ritaenu4556]

What is the meaning of E - 1 or E - 2

[@emamollik1233]

Vaiya eikhne je 103 uthlo tar por result ki vbe ber korbo

[@MommyAileenVlogs]

Hi can expired lancets and strips can still be used? i have still lot of it but already expired as per label. can still use it?

[@learnbloodsugartesting]

It is not recommended; however, I have heard of people using them once expired. Keep in mind the test strips may not be as accurate after the expiration date.

[@MommyAileenVlogs]

@@learnbloodsugartesting I thought this also that it can used but it may not be accurate results. appreciate your reoly. Thank you

[@TheChildandparenting]

Please what do I do now

[@neetamodi2470]

How to set in mmol/l?

[@ronnieross4148]

can you reuse the Lancer more than once

[@learnbloodsugartesting]

It is recommended to use a new lancet each time for comfort and to reduce chance of infection, however some people do use them more than once.

[@kennyinuk5420]

hi , please show how to use the USB connector - can i use a usb power bank to power this device?

[@learnbloodsugartesting]

The USB connector is not for providing power to the meter, it used to download results to a computer. You can contact customer service if you would like to get the compatible software.

[@UKkenny]

THANKS @@learnbloodsugartesting

[@naoomamohmed3075]

لمادا حين اضح الشريحه لاتظهر علامه قطرة الدم

[@chideraekoh7737]

Mine reads in points ,how do I convert it

[@learnbloodsugartesting]

It can't be changed, the back of the meter shows the units it measures in.

[@TheChildandparenting]

Good evening, try using it the meter is showing 3-1

[@actuallyterry]

My machine is exactly the same as yours but it does not have all the info on the display

[@learnbloodsugartesting]

Interesting, there must be different versions of this meter.

[@andy_yt_02]

Hello, what should be the average mg/dl for a 20 year old?😅 I got 89 and I ate one hour ago

[@mohammadjahid7302]

How many times we can use niddle

[@TasawarHussain-zw2hm]

I have a question ❓ What is the purpose of S and M what is its means? Why we use S and M button? Can anyone tell me please?

[@TheStanislavson]

Thanks mate!

[@learnbloodsugartesting]

You're welcome!

[@geethaprabhu6493]

Main also showing E-1

[@umeshmethre1952]

One lancet should be used for how many times

[@learnbloodsugartesting]

It is recommended a lancet be used only one time.

[@keandoroques]

Hi,,magandang umaga po,,ask lang po Kong sira n paggnito n Ang lumalbas s glocuse meter C-E tpos una nya lalabas 10 pababa Ng Lo ganyan n cxa

[@keandoroques]

C-3 pla lumalabas s glocuse set meter..Dina Ng nanumber..pag inulit,,mabilis count down tpos ganyan nmn Ang lalabas Lo sunod C-3..ask lang po sira NBA cxa pgganyan? Thank you

[@learnbloodsugartesting]

It sounds like you are getting an error code, be certain you are using the correct test strips, that they are not expired or have been stored improperly and sometimes constant error codes may mean it's time to replace the battery.

[@iqosuser2754]

Menu M to Set S very simple

[@sunikunhalan9731]

Can you give me the service number of Akkacheixugar machine in Kerala?

[@gloriavincent7159]

❤❤❤❤

[@sayedmarwan248]

Thanks

[@UploadYouTubechannel]

Thank bro

[@learnbloodsugartesting]

You're welcome

[@تعليمالراندامعامضياء]

شكرا

[@loknathdas5152]

Nice❤

[@NimatunNigar-il6yf]

Its showing E2 everytime

[@Crazzyyy_]

Bcz may be you are not applying blood within 90 sec. You hv to apply blood within 90 sec after getting blood drop symbol

[@rollylouis]

My machine showing E1

[@splendor10]

Same for me Did you found any solution? Plz reply

[@M.PriyolataDevi]

Carefulu show

[@mehrisalehi4808]

My machine show me E - l

[@mehrisalehi4808]

I don't know what's wrong

[@greenplantdiary9585]

Same

[@mshahzad4341]

BATTER LAGANA KE LIYE TUMHARI MUMMY BATAYE GEE😂

[@chiemenemblessing9548]

My machine is E-1

[@emamollik1233]

Plz bolben

[@iqosuser2754]

This is a terrible meter. Old system. Active is way better.