Using a PAINT Mixing Cup (Secrets Revealed)

In this video I show you the easy way to read and use a paint mixing cup, with all the best kept secrets. also Ill list where to get the products below in my amazon affiliate account. You get this service at no additional charge to you and you also help out the channel. Also if you want to help out the channel pick yourself up a t-shirt below!!!!
My Buddy Kenneth's KZbin channel / @sherrillsautomotive7350
Mixing cups amzn.to/3vp7baI
Stir sticks amzn.to/3oJGKc2
Strainer, filters amzn.to/3zjpPSu

[@david9783]

The tape trick is great. Eliminate the confusion.

[@ACDesignsGarage]

Thank you!, it helped me when I was learning!!!

[@wulcanic9603]

This is the type of video I needed, such good explanation and you really took your time with it which I appreciate, thanks man!

[@ACDesignsGarage]

Thank you for watching!!!

[@DoktorJeep]

This is the best video on how to do this. IMO. Short, to the point, not preceded by 10 minutes of blah blah blah and pretense, and he takes the time to isolate each example. THANKS!

[@ACDesignsGarage]

Thank you very much for the kind words!!!!

[@moe4772]

I watched several pro's show the mixing process but yours just made it "snap" in my head 😊 Love the way you explained it - I finally got it lol - THANKS! 👍

[@ACDesignsGarage]

Thank you very much, glad it helped!!!

[@netwt449]

Next week… the trick for 3 to 1 ! (THX for this video & info!)

[@randyluna8472]

Pretty good, explained it very well with no confusion

[@ACDesignsGarage]

Thank you very much!!!!!

[@danreagoso3939]

real good explanation !

[@ACDesignsGarage]

Thank you!!!

[@rtkracht]

Very helpful! Thanks for taking the time to share.

[@ACDesignsGarage]

Thank you for watching!!!!!!

[@DavidDoak-q3f]

Thanks very helpful !

[@ACDesignsGarage]

Thank you for watching!!!!

[@Redpillgt502]

This is a bountiful explanation aver find on KZbin thanks to take time to explain in this video 📷

[@ACDesignsGarage]

Thank you, so glad I could help!!

[@FTW616]

Me and Sara gonna get a tshirt and hoodie! Keep doing what you're doing!! Passing along knowledge and helping people in this or learning this trade!!!

[@ACDesignsGarage]

Thank you Kory!!!!!!

[@tracycolorado]

Thanks , Dig the hoodies .

[@ACDesignsGarage]

Thanks for the support!!!!!!

[@angelmorales220]

Nice job.keep up the good work.

[@ACDesignsGarage]

Thank you very much!!

[@clickersorising4601]

Thanks, now I understand

[@ACDesignsGarage]

Awesome I hope it helped!!!

[@mariusmathew1083]

awsome great job bro your the best

[@ACDesignsGarage]

Thank you very much!!!¡

[@Mightymouse103]

Cool

[@ACDesignsGarage]

Thank you

[@larrycassidy1702]

Great job

[@ACDesignsGarage]

Thank you!!!!

[@user-un5my5bw4j]

Now days I do not use mixing cups anymore if I dont have to. I use 3M PPS 2.0 system with hard cup that has the ratios around it that takes didposable lids and liners. Since lacquer thinner and carb/choke cleaner (what i use to clean my gravity hvlp guns) is kind of expensive now days. It saves me money in not having to use lacquer thinner to clean out a mixing cup and a gravity cup. Seeing how lacquer thinner is $23 per gallon and reducer is $40 per gallon

[@ACDesignsGarage]

I need to upgrade to them for sure, I get stuck in a rut some times lol

[@Terry-sb4bk]

GOD BLESS AND THANKS!

[@ACDesignsGarage]

Thank you have a Blessed day!!!!!

[@OctaneAddictsTV]

Good stuff!!! Keep'em coming!

[@ACDesignsGarage]

Thanks man, any suggestions????

[@OctaneAddictsTV]

@@ACDesignsGarage I think they look great! You need to come race with us in November at the Barnyard 400!

[@ACDesignsGarage]

@@OctaneAddictsTV man I dont need any more habits lol, I have a couple racing karts hanging on my wall from back in the 90s when I use to race lol

[@OctaneAddictsTV]

@@ACDesignsGarage you need to come weather you race or not. Big KZbin collab!

[@atlantapowerwashingsolutio7420]

Thank you

[@ACDesignsGarage]

Your welcome thanks for watching!!

[@kerryyeroyan8212]

That Omni epox primer MP171 and MP175 catalyst calls for 2:1 to 1/2 part acetone, as a reducer. Using the “parts” on the cup with your example shown at the end, I came out to 8.75 parts total or..just about 18oz. Hope I’m right?

[@ACDesignsGarage]

The way I do those is look for a 2:1:1 chart on the cup then do your 2 parts epoxy then 1 part hardner the just go half way up on the last 1 part with the acetone. Its the easiest way for me. Hope this helps!!!!!

[@kerryyeroyan8212]

@@ACDesignsGarage Ok great, thats what I was thinking! Thanks!!

[@jefferystrange7476]

Hey man thanks for the video. really cleared up some confusion Ive had about mixing ratios. Then I read on the rustoleum can of Farm and Implement paint that thinning for spraying may be up to 15% by volume. Now im confused again. Can you help me with that? Thanks

[@ACDesignsGarage]

It messes with me also. The way I do it is if its a gallon of paint which is 128 ounces just google what is 15%of 128 and it comes to 19.2, so 19.2 ounces id how much reducer that goes in the whole gal. Kinda cheatin lol but that is how I do it thanks for watching!!!

[@juarezcustombuilds]

What if you want to do 3:1:1 . How would you do that on you last example

[@ACDesignsGarage]

My favorite way to mix odd ball mixes is, if im mixin a small amount I take a spray paint cap and mark a line on the inside near the top and call it one part. So if you need 3 parts fill it up 3 times and pour it in a mixin cup then if you need 1 more part fill it to the same line and pour it in the cup then fill it up again with one part then you have 3:1:1, as long a you establish any container to one part you can mix anything , Because one part is one part . I hope this helps!!!!

[@kareemokonofua3662]

If I'm to use RGB model in paint production for a 20 litre bucket nd my Red is 78% Green 60% and Blue 50%... How do I measure them accurately to yield the best result in the 20 litre paint bucket

[@ACDesignsGarage]

I wish I could help you, all I have ever worked in is ounces And measurements in parts, sorry I couldn't help you.

[@steveerickson3103]

I understand that but if the mixing cup only says 8:1:1 how do you make 8:1:2 ?

[@robertscott3399]

I EVAN WENT AS FAR AS BUYING THE MIXING RULER BUT THEY SENT ME THE WRONG DARN ONE AND GOT REFUNED AND HAVE NOT PICKUP SANOTHER tcp DOSENT CARRY THE RULERS LOL

[@steveerickson3103]

How do you mix 8:1:2 ?

[@ACDesignsGarage]

Usually the first number 8 is your clear or primer or basecoat. The second number 1 is usually your catalyst and the last number 2 is usually the reducer, but check your manufacturer ratio, most of the time it tells what each component is and mix it like they say so you don't have any horror stories lol, hope this helps!!!!

[@rudyflores9395]

Some say 3 parts paint 1 part reducer. What the hell does that mean ??????

[@ACDesignsGarage]

On 3:1 like your talking about the first number is your paint color or primer or clear, the the second number will be what you thin the paint with also know as reducer. I hope this helped, this stuff can be very confusing if you haven't messed with this before!!

[@robertscott3399]

bro my math sucks and kinda like my dad i usualy eyrball it. those cups are confusing to me simple is hard for me to understand buty complicaTED I CAN DO GO FIGURE LOL I USE A 4:1 CLEAR NO REDUCER MANUF DOES NOT RECOMED IT.ALSO SAME FOR THIER PPRIMER ITS THICK REAL THICK LOL

[@ACDesignsGarage]

Yeah man it took me a while to learn on the cup. Here is a ez way to do your 4:1 or what ever ratio. Just take a small cup put a sharpie mark on it and that will be your 1part fill it up to your line 4 times and that will be your 4, then fill it up to the same line 1 time, then mix it with the 4 part then like that you have a 4:1mixture, hope this helps!!!!

[@robertscott3399]

@@ACDesignsGarage any were on the cutp and tthat my main component 4x then one on same thats actavator.hit thatds easy enoughj never thpough6t about that. as of now i have Devilbliss set big gun and a touchup tonight i have to clear 3 guitars the one is an 80s s tyle crackle the other custom graphics that i did one a kramer and the other is dean ML if you do not know guitarts i was thibking of doiung a video kof them while clear coating.

[@Bob-pu7ps]

i have a 8 2 1

[@tittan1500]

Very helpful thank you

[@ACDesignsGarage]

Glad it was helpful!