Acoustic Chill Session with Loopy Pro and HX Stomp

[@joenlufamily344]

Wow, 311 vibes!

[@Deadphish1]

Another great performance! Great stuff! Very pleasing to the ears. You make Loopy Pro sparkle! Great video also. Really appreciate the camera angles showing the magic.

[@max_yar_guitar]

Thanks again!

[@tres913]

Very cool!

[@max_yar_guitar]

Thank you!

[@Bluewaterboy]

Enjoying your videos Max!

[@max_yar_guitar]

Glad to hear it!

[@EricMarteau]

congratulations! I still can't manage to configure “Loopy” to start the loop when I press the Piston midi. At the moment it only records when the piston is released and that results in a failed loop. I'm sure your answer will help many!

[@max_yar_guitar]

Try this: - MIDI Learn - Choose the button/loop on the screen - I'll see the "Listening for events..." message - Press the button on your MIDI controller - Loopy Pro should determine which MIDI signal was received. Most likely, it will be a CC (Control Change) signal. Something like CC 23. Press on that message. - Choose On. This means that Loopy Pro will receive MIDI signals only when a button is pressed. Hope it will help!

[@Scarecrowsbandct]

hey, is it just me, or the auto midi learn doesn't works with helix? I have the lt and when I am on the "listening for events" tab, nothing happens if I press something on my helix... do you know what am I might missing? I can only manually assign controls, but with auto learn would be so much easy

[@max_yar_guitar]

MIDI Learn does work with the Helix, but you’ll need to configure the buttons properly in the Command Center on your Helix. Set each button to send a MIDI CC value of 127 when pressed, and a value of 0 upon release. This configuration allows Loopy Pro to detect and assign the controls correctly when using MIDI Learn. Check out this tutorial: kzbin.info/www/bejne/i4S7pHuZmsublbM

[@Scarecrowsbandct]

@@max_yar_guitar thank you very much!

[@trevorjohnson1412]

Is that bass effect coming from the hx stomp or iOS plugin? How would you recreate using iOS plugins? Thanks!

[@max_yar_guitar]

In this video, the bass effect comes from the HX Stomp. However, you can create a similar effect using iOS plugins. Here are a few options: 1.BYOD: A free plugin with a solid octaver that works great 2.ToneStack: many effects, including octavers 3. QVox Octaver Here's my my video on that kzbin.info/www/bejne/iJ-zipp8f9KMg9E

[@cwongpradit2752]

how to disable direct sound ?

[@max_yar_guitar]

It depends on how you want to monitor your sound using HX Stomp: 1 Direct monitoring from the Stomp: In this case, you should simply open the mixer in Loopy Pro, find the input channel, and disable monitoring. Unfortunately, you can't use Loopy Pro effect plugins for the input channel. 2 Loopy Pro software monitoring: In this scenario, it's impossible to use any stomp effects. You should create a preset with a volume block and set it to zero volume. Then, create a hardware input in Loopy Pro and select the 5/6 channel (bypass signal from HX Stomp)

[@samnambull]

Круто! Максим, какой плагин ты использовал для звука бас-гитары?

[@max_yar_guitar]

Спасибо! Именно в этом видео я все звуки генерирую через свой процессор - HX Stomp. В том числе и бас. А если в iPad, то можно через плагин Qvox (это именно октавер), или через ToneStack PRO (там есть всякое, в том числе октавер). Пример ToneStack PRO можно послушать в этом ролике в самом начале kzbin.info/www/bejne/rX6ucoKElpKrj6M

[@samnambull]

@@max_yar_guitar Максим, спасибо за развёрнутый ответ! Ты супер! И спасибо за то, что делаешь шаблоны! Особенно мне понравился разбор игры Маркуса, очень познавательно!

[@fernandoscolletion]

Have you experimented using a guitar app instead of an external pedal, like Line6? Maybe interacting with AUM and LP? I say this just to avoid hardware (batteries, adapter).

[@max_yar_guitar]

Great question. Actually, I’ve built entire acoustic guitar pedalboard inside Loopy Pro instead of HX stomp. I don’t use some pedalboard emulator (like Amplitude or Bias). I use a few plugins. Some of them are from Loopy Pro (eq), some of them are free from App Store, some of them I’ve bought from App Store. I am still testing this setup but I am quite happy with the sound and versatility of it :)

[@JolyonPatten]

@@max_yar_guitar That sounds great. Will we ever get to see it in detail, or is it just for you?

[@max_yar_guitar]

Thanks! Yes, you will, I'll make a rundown a bit later :) So many topics on the queue

[@tomfoolery4077]

The one thing I can not seem to get, when I create my first loop on the first colour, every subsequent loop on the other colours is always the same length as the first colour. I am sure it is a setting somewhere, but jut like you had the percussion loop be 4 bars and then the chords be 8 bars ( give or take ), I am trying to achieve that. Any help would be greatly appreciated.

[@max_yar_guitar]

Try this: go to Clip settings > Stop quantization “None”. And Length Quantization “On”

[@elliesfriend2771]

Yummy tunes

[@wallacenock7423]

Max what guitar pickup are you using

[@max_yar_guitar]

I use Fishman Rare Earth Mic Blend as my main pickup. It has a built-in mic for natural acoustic vibes. Also, I got a second output jack. It’s a simple piezo disk pickup to capture kick sound