Acura MDX Timing belt replacement- easy steps

Рет қаралды 28,910

Zuluboy Mechanic

Күн бұрын

Пікірлер: 23

@clarkgwozdecki6782 3 ай бұрын

Excellent video. Your directions are very concise and your voice is very clear. Thank you

@brianrosenlof388 Ай бұрын

Really nice to be able to see the job done with the engine outside the vehicle. I've see a lot of video where they do it in the vehicle and it's hard to tell what they are doing sometimes. Mine is due for replacement and I'm trying with the idea of doing it myself. I've never done a timing belt so I'm still feeling a little unsure if I'm up for the job. Regardless, seeing it this way made some the steps a lot more clear. Thank you!

@zuluboymechanic2481 Ай бұрын

@@brianrosenlof388 It can be intimidating at first but just watch couple videos and have the right tools ,you can do it. Make sure the engine is timed before removing anything and double check your work after repairs

@adamwright9040 2 жыл бұрын

Very good video, don't sell yourself short! Very good explanation, documentation and hints along the way. I hope I don't have to do this, but if I do, I am prepared.

@zuluboymechanic2481 2 жыл бұрын

Thank you for encouraging words 🙏. Remember nothing is impossible if you put your heart and mind into it

@seanh2390 Ай бұрын

very useful video thanks for making it

@BLACKEDOUTVIK 4 ай бұрын

Great video

@billburkart8527 2 жыл бұрын

Thank you, very informative. Well done. 👍👍

@zuluboymechanic2481 2 жыл бұрын

You're welcome. Hope it helps out

@ricdean73 Ай бұрын

Its probably not the tensioner leaking. You should remove the oil pump housing and replace the o-ring.

@sh2697 2 жыл бұрын

how do you change the cam o ring seal?

@zuluboymechanic2481 2 жыл бұрын

I'm assuming you are talking about cam seals? If so, pay attention as the cam might spring either back or forward. Loosen the bolt (17mm) using an impact gun if you got one if not you can lock the cams and use a ratchet or wrench to break it loose. To pull the seal out I use 2 small screws. Avoid prying with flat blades as that can cause issues and leakage after installing new seal. I hope you get the idea if not im sure someone has a video on this job.

@andymedina7054 11 ай бұрын

Ty👍 Bless you too

@amenen01 7 ай бұрын

Only use Mitsuboshi or original Honda timing belt. Any other belt will fail prematurely and ruin the engine. Happened to me with this exact Gates timing belt. Expensive rebuild of the heads because is an interference engine.