Rhino For Beginners 3 - Urban Furniture

  Рет қаралды 35,980

The Adam

The Adam

Күн бұрын

Пікірлер: 46
@Lia-bp3px
@Lia-bp3px Жыл бұрын
hi your videos are very helpful but i have a little problem... in 3:54 minute of the video when I draw on the front view the lines that i draw don't appear on the x axis when I change to the top view. Every point of the polyline snaps in random points of the already existing objects... are there specific settings that change that?
@AdamArchh
@AdamArchh Жыл бұрын
Hi thanks. Before drawing in any viewport, make sure that the project command located at the bottom-middle of the screen is enable.
@ChongjaeSKIM
@ChongjaeSKIM Жыл бұрын
3:52 it is very important to keep "project" osnap button on!
@art_forever_32
@art_forever_32 Жыл бұрын
Awesome design abee!
@milashkamilashka2429
@milashkamilashka2429 2 жыл бұрын
Hello why I can’t choose chamfer edges 🙄🙄🙄🙄
@mexrojsobirov7582
@mexrojsobirov7582 2 жыл бұрын
Hi Mr. Adam! It is nice to watch you, thanks a lot
@AdamArchh
@AdamArchh 2 жыл бұрын
Hi Mr, Mexroj. Thank you
@cango5679
@cango5679 11 ай бұрын
great looking design. I would love to see the form pressing device for that piece.
@lyluuduong3068
@lyluuduong3068 6 ай бұрын
i really love these kind of video appreciate it !!!!!!
@atikaarafah835
@atikaarafah835 2 жыл бұрын
Adam, Thanks for all Rhino tutorial I really appreciate 🙌👏
@AdamArchh
@AdamArchh 2 жыл бұрын
Thank you for support
@alisabachurina372
@alisabachurina372 4 ай бұрын
Hi again🤭 0:58 Unfortunately I get the second plate as twisted…I don’t understand what is the matter [function loft]
@AdamArchh
@AdamArchh 4 ай бұрын
- Each edge has a beginning and an end. - When selecting the edges for Loft, make sure you click on the same part of both edges. - Notice that at 00:58 I click to the left of both edges.
@BijoyThangaraj
@BijoyThangaraj 4 ай бұрын
You might need to align edges under loft options.
@ironpark4042
@ironpark4042 22 күн бұрын
more from rhino pls Thanks
@alisalim80
@alisalim80 2 жыл бұрын
Thanks for the great tutorials, I got a questions please : When I create a plane I get plane with edges in the center unlike yours, and the same when I offset the filleted edges I get edges , unlike your model that doesn't have edges in filleted edges , how this can be solved?
@AdamArchh
@AdamArchh 2 жыл бұрын
Hi thank you, Send us a video Insta: @AdamArchh
@quasiblunted
@quasiblunted 4 ай бұрын
I have thw same issue
@fatmaelshazly8362
@fatmaelshazly8362 Жыл бұрын
beautifull 💙
@Furn_girl
@Furn_girl 6 ай бұрын
Hello again! When you are making the box at 5:26 abouts how do you make the box hit the three rectangle (support?) corners. The command bar shows that you are using the 3 point box but I am still having trouble even with that setting. Thank you for your help and thank you for the video!!
@Furn_girl
@Furn_girl 6 ай бұрын
Never mind I figured it out!
@salomemateus3512
@salomemateus3512 Жыл бұрын
Hi, love your videos, I was trying to do the chamfer edge but I cant select the edge, I tried CTRL+SHIFT and nothing, I tried to separate the edges and nothing, I put a filter to select edges only and still nothing. Is my Rhino mad at me? 😅
@AdamArchh
@AdamArchh Жыл бұрын
Hello, create a simple cylinder and try making a chamfer edge. If the result is positive. It means there is an error in the model you created.
@xxlola203
@xxlola203 11 ай бұрын
Hi Adam, Still does not work with a simple cylinder, but it works with a simple box. How can I fix that ?
@salomemateus3512
@salomemateus3512 11 ай бұрын
@@AdamArchh my model had a mistake, it was hollow, a tube instead of a surface, so now it worked. Thank you!
@AdamArchh
@AdamArchh 11 ай бұрын
@@xxlola203 Check the fillet radius
@ComerciEzequielMaximilianoFADU
@ComerciEzequielMaximilianoFADU 11 ай бұрын
it's because you have yo make it a solid, it happened to me but when i tried that it worked
@johnsawouk
@johnsawouk Жыл бұрын
On which render software the final renders were made on?
@AdamArchh
@AdamArchh Жыл бұрын
3Ds Max + Corona Renderer
@almirakvic7791
@almirakvic7791 Жыл бұрын
Since you use both softwares, can the same quality of render be achieved in Cycle or eevee@@AdamArchh
@lucyynwang
@lucyynwang 9 ай бұрын
I’m using Rhino 7 still. My next is a rendering software, then Rhino 8 hopefully. You seem to use all software and well! May I ask if you would have suggestions for me ?
@madceee
@madceee 2 жыл бұрын
that was awesome 👍
@AdamArchh
@AdamArchh 2 жыл бұрын
Thanks
@manuelespinoza4252
@manuelespinoza4252 Жыл бұрын
Tienes un patreon donde este todo el video con el renderizado?
@AdamArchh
@AdamArchh Жыл бұрын
All our videos are public. There is no tutorial about rendering. We don’t have a patreon.
@manuelespinoza4252
@manuelespinoza4252 Жыл бұрын
@@AdamArchh :(
@michaelfathy6065
@michaelfathy6065 2 жыл бұрын
love your videos veryy creative!!
@AdamArchh
@AdamArchh 2 жыл бұрын
Thank you Michael
@michaelfathy6065
@michaelfathy6065 2 жыл бұрын
@@AdamArchh you're welcome! I wish you great success
@AdamArchh
@AdamArchh 2 жыл бұрын
@@michaelfathy6065 Thank you again for supports
@MrJdorrington
@MrJdorrington Жыл бұрын
Side note: I wonder how that is any more socially distancing than a normal table and benches...
@marcoerra4738
@marcoerra4738 2 жыл бұрын
Aw, i was so fond of the way it said poly-leen☹
@AdamArchh
@AdamArchh 2 жыл бұрын
Haha
@mirlorojo86
@mirlorojo86 2 жыл бұрын
Muy amable por compartir 🚀
@AdamArchh
@AdamArchh 2 жыл бұрын
Gracias
Rhino For Beginners 4 - Roly Poly Chair
6:40
The Adam
Рет қаралды 20 М.
Rhino For Beginners 2 - Coffee Table
5:50
The Adam
Рет қаралды 33 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
Rhino For Beginners 10 - Pipo Chair
6:30
The Adam
Рет қаралды 152 М.
getting started Rhino 8 - Lounge Chair
1:46:28
Rhinoceros3d
Рет қаралды 3,6 М.
Very Important Rhino Commands - 3
5:15
The Adam
Рет қаралды 26 М.
| RHINO 7 - PARAMETRIC MODELING | Loft + Contour
8:28
Yakup Karaer
Рет қаралды 89 М.
Rhino 7 Product Design Modeling Tutorial Part 1
38:09
Daniel Brunsteiner
Рет қаралды 103 М.
Rhino Basics - Quick text Signet
16:55
Chris Botha
Рет қаралды 26 М.
3 Different DIY Concrete Tables
19:48
Pneumatic Addict
Рет қаралды 35 М.
Rhino Interior Modeling | Modern Kitchen
12:37
JInn Arch Viz
Рет қаралды 40 М.
Rhino For Beginners 5 - Frank Gehry Wiggle Chair
5:40
The Adam
Рет қаралды 15 М.
Rhino 7- Getting Started with Rendering
23:03
Rhinoceros3d
Рет қаралды 137 М.
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19