Add the “Film Bloom Effect” to your videos in 2 clicks (Updated Video in Description)

[@certifiedleanproductions]

Great Content bro! Audio is great!!! Keep it up bro!

[@Trentorials]

Thank you. I have been working hard to get better audio! Was the video clear enough? I always hope it is but it’s hard to judge from my perspective sometimes!

[@certifiedleanproductions]

@@Trentorials yeah bro! sounds like you dig a good low cut! sounds great!

[@Trentorials]

Thanks man. Not sure if I did or didn’t but glad it sounds good

[@JhumkiGirl999]

Thisbwas quick clear and super helpful. Thank so much. And that shot is so beautiful. Did u take it? And how did u colorgrade it? Thank u.

[@Trentorials]

@@JhumkiGirl999 yes I took it and I made Some videos on my color grade process and tutorials should you want to see those! The video that this reference video I edit is from a video about sound design, a few videos prior to this one on the channel! Check it out and thanks for watching and the kind words. Glad you’re here

[@smlc4407]

Nice video, quick question. Why am I not getting anything while using cut off and threshold at 83 and 88? I'm having to use cut off at 65 or 70. is it a problem with my color grade?

[@Trentorials]

I’m not exactly sure what the problem would be, but make sure that the adjustment lawyer only has this effect applied to it. Don’t combine other effects on the adjustment layer with the luma key and Gaussian blur

[@nawaaff]

Love your videos my man. I'm struggling a bit after many attempts. Hope you can help? Every time I drag the luma key on the upper footage, it remains 'red' instead of 'yellow'. From my understanding this is the rendering but I have no clue how to get it done. i've waited so long and tested it on a very small clip to get the effect. Any advice would be great!

[@Trentorials]

@@nawaaff so I’m not sure I have ever seen your issue but I would believe there is some part of this where you have incorrectly done something. Best thing I can tell you is duplicate the base clip, add the luma key to the top, duplicated clip, and then add the Gaussian blue too. This shouldn’t change the color but should blur only the highlights on the luma channel (hence the luma-key) Let me know if this works and if not, you can send a screen recording to my email (on my about page) and I’ll try and help you there so I can see the problem.

[@raghavsvisualtwist5205]

Hi, can you please tell me the name of your Font? Its really Cool

[@Trentorials]

Made a video on this. Called mikela

[@anavocado6873]

TYSM! I just graduated college in May and can finally get back into editing now that it’s summer! This video made everything look so easy! Appreciate the work you do! 🫶🏻💕

[@Trentorials]

Hey that’s awesome. Glad to know it helped! Best of luck!

[@cjbonifer8839]

Super helpful brother!

[@Trentorials]

Glad to hear that! Thanks for watching!

[@APrinceOfLife]

great video, thank you so much

[@Trentorials]

Glad you liked it! Thanks so much for watching

[@siderluz]

I'm from Brazil and your videos are awesome! I would like to know how to leave this effect that was left in your image in this video. I tried following the steps but when I use a layer of lut color it looks bad.

[@Trentorials]

@@siderluz what do you mean? This video shows you how to add the effect!? What effect do you refer to?

[@pierre.breckler]

Thanks for your video ! I just have a question, when I apply the channel blur effect on my layer with the same setting as you my image turn flat again... it's a bug ?

[@Trentorials]

Did you make sure you only apply a channel blur to an adjustment layer? There should be no flat image effects being changed… not sure what you mean exactly

[@AndrewAguilarPhotography]

Very helpful !

[@Trentorials]

Stoked that you think that! Thanks for watching

[@PBORN]

Can you explain why you lowered the threshold to 88% instead of keeping it at 100%... and thank you for sharing your knowledge.

[@Trentorials]

it acts as a mask. It works with the color channels of the video to identify the highlighted areas or bright section of the video, and then the amount on the threshold that you set, is telling premier that only 88% of that data should be covered. Hard to explain in words, but I hope this helps a little bit

[@mesutaytekin5901]

İ like your energy

[@Trentorials]

Haha. Thank you and thanks for being here!

[@shelostray]

really helpful thanks buddy

[@Trentorials]

Glad it helped

[@walkwithkeon]

thank you for this!

[@Trentorials]

For sure. Thanks for watching it! I hope It answered any questions you had?

[@jhilmiliqueen]

i just did this, also did some color grading and the results were mind blowing! thank u so much! 🤎🤎💜💜🙏🙏 all those paintings on the background look so gorgeous! who is the artist in the video? did she make those paintings? TY.

[@Trentorials]

@@jhilmiliqueen hey. The artist is my sister, she sells and paints a lot of scenes like the ones on the wall, and the one in the video about sound design that I was using as an example. Thanks for the kind words, I’ll pass them on to her. I’m also glad to hear this was something that works for you, thanks for checking out both videos

[@ASTRO29]

Really thanks bro, ur amazing❤

[@Trentorials]

Thanks for coming back to another video Bro! Happy to help

[@derlijn]

Great content, thanks

[@Trentorials]

For sure. Thanks for watching and I hope you enjoyed it. If you ever post any work, tag me so I can see it, would love to watch.

[@DESHPLEASE]

this was great ty!

[@Trentorials]

For sure. Thanks!! Lmk if you use it in a post. Would love to watch it

[@safronthinks]

Pls tell:-What is the font upu user at last🎉🎉

[@Trentorials]

I made a short on it!

[@safronthinks]

@@Trentorialsfont:- Mikela, thenks man

[@safronthinks]

Welcome

[@AshtonJarell]

I wish my MacBook m1 could take these add ons because its wayyy too laggy in the play back... any suggestions?

[@Trentorials]

It’s actually a common problem for everyone. Once you wait and see the result, toggle Fx off and then edit as needed then turn it back on and export

[@AshtonJarell]

@@Trentorialscan you make a video on this and how the workflow would be… i watch all your videos bro big help on my journey

[@Trentorials]

Not sure what you mean by a video on the subject? That’s what this video is? No? Slightly confused

[@limbotvperu6867]

so you have to go in clip by clip and add the effect? way to do apply to a whole escene ? with 10 to differente camera angles

[@Trentorials]

Select every clip at once by clicking and dragging. Then just pulled alt and drag all the them up at once. From there while applying the settings of the effect to one clip then copy those and click and highlight all of the other clips you want to add it to then paste the effects. This way you don’t actually have to click each one.

[@Walli_Arimateia]

In my effects tab I don't have the obsolete ones

[@Trentorials]

Hmm really? I still do; I updated this morning to whatever the latest premiere update is. I still have that!?

[@MarkKidsley1989]

i dont either, RIP effect

[@Trentorials]

@@MarkKidsley1989 ill rework it. find another way, and get back ot you guys

[@israelshofela7146]

@@Trentorialsany update on this ?

[@Trentorials]

@@israelshofela7146 Made a video

[@ReinMixTape]

Thank you.

[@Trentorials]

For sure. Thanks for watching

[@LetsImproverYou]

Why does using this affect crush my CPU even when I go to export it it took me an hour to do a 15 second video. Generally, I have a pretty great system.

[@Trentorials]

I think that's because it uses software encoding to render. And because it has to render each frame with a very heavy effect like the Luma Key, it makes everyone's computer slow as hell. Unfortunately, this is a community issue, and not an individual problem even on good computers

[@BassMusic123]

@@Trentorialsdo you know if it’s a heavy effect on Davinci?

[@Trentorials]

@@BassMusic123 it definitely intense in both softwares but I would say Davinci runs smoother

[@Trentorials]

@@BassMusic123 just don’t update the software as they removed channel blur from premiere (along with a bunch of other effects) I’m working on developing a fix though

[@jugbirsingh2899]

First Frame (Intro) Font Name ???

[@Trentorials]

I made a video about this! It’s called mikela

[@Aquelefelix]

u could put the preset up for us to download, luv ur vids man ;)

[@Trentorials]

That’s fair. Good idea. It will be in my Gumroad store soon.

[@marcuuuss2x]

jaja I just watched the OG halation video yesterday

[@Trentorials]

Haha. So cool of you to come back to the channel. I hope this one was better quality

[@ThomasAllal]

I just updated the last version and I do not have Channel Blur nor do I have Obsolete. Anyone else ?

[@Trentorials]

@@ThomasAllal hi, yes this issue has been addressed and I have made an update in a recent video! Feel free to follow that one

[@ThomasAllal]

@@Trentorials Awesome, appreciate it

[@Veryrareboy-cq6zm]

i luv it

[@Trentorials]

Thank you! And thank you for watching. I hope you found it helpful!

[@May1rain]

Great video! thank you

[@Trentorials]

glad you liked it, thanks for watching and being a subscriber!