Adding Surface To The Phaze V Makes It A GAME CHANGER!

[@larryhudson1963]

Thanks again great video of the Phase 5

[@LuisNapoles]

Thanks for watching!

[@willcrowder2000]

I wet sand my P5 by hand with a 3000 pad every week before league or anytime I throw it, and it is 🔥 on any condition I use it with that surface! It has taken over the P2 as my all around favorite ball! I still have and throw the P2, usually start with it, but I have found no matter when I change to the P5, it reacts perfectly for me! 🐐 ⚡️ 🎳 🤘🏼

[@alexanderbreen4010]

Something tells me Phaze II Phaze V is gonna be my new favorite 1-2 punch

[@LuisNapoles]

I been loving it yea!

[@aceofdimonds6902]

I intend to use phaze v as a pair up with the Xponent, so I am thinking I want to leave it polished so that I can get more of a shape that swings the lane. Would that be a fair assessment given the surfacing you have done here was intended for fresh?

[@LuisNapoles]

It’s a good one!

[@koreyreed602]

I just got phaze 5 and having trouble getting it to hook like I need on fresh lanes will adding surface help with that?

[@LuisNapoles]

yea 100%

[@traviskirk3834]

What grit of trucut . Does bowlersmart sell ctd stuff now

[@LuisNapoles]

I use Abralon just only had picture of this one lol

[@chrisleeleslie]

@@LuisNapoles booooo 😆

[@brianparsa7794]

Hi Luis, terrific video! Question: is that P5 with surface similar or dissimilar to Zen? Especially curious to hear about any difference in shape between the two balls. Thank you!

[@LuisNapoles]

zen will still be stronger and earlier cause of the stronger cover

[@M40music]

Hey so in league I have been leaving so many ten pins lately whether I play tight angles or open it up. What would you recommend

[@bryanestrada1641]

try moving back 3inches on the approach. it will change the angle of the ball hitting the pocket

[@LuisNapoles]

I would recommend changing balls maybe? There's so many factors that go into leaving ten pins!

[@markwilliamburright8160]

so with adding surface do you let it lane shine or apply surface every time you throw that ball?

[@LuisNapoles]

apply surface every time I bowl for score

[@rayb1330]

Got to love house shots. :)

[@LuisNapoles]

You got that right!

[@kevinbartley2362]

I would like to see a video on the exotic gem with surface as well. I am considering hitting my exotic gem with 2000 grit but I don't want to create something I cannot control.

[@LuisNapoles]

I’ll have to do that!

[@jamallitebulb2445]

Shot 256 in league with it out box last week, put it at 2k polish and it’s not reading the lane properly when I move in.. I’m a try it at 4k Fast so it can read in the right spots…

[@LuisNapoles]

fingers crossed for you!

[@benscotthibbert]

What was the benefit of hitting it with 1000 and then 4000 abralon? I’ve got a cosmos and I hit it with 1000 grit recently but wondered why you did the extra step

[@LuisNapoles]

just to take the polish off the ball

[@seniorxj2931]

@@LuisNapoles why not go straight to 3k abralon?

[@LuisNapoles]

@@seniorxj2931 as I said above lol thr 1000 is to take the polish off the ball

[@seniorxj2931]

@@LuisNapoles sorry I just noticed I posted it twice. Thank you for responding though!

[@Skeer0]

I like seeing videos when you change the surface of the ball. Now you gotta go back and do new vids on all of the 2022 releases with surface changes.

[@LuisNapoles]

oof lol I wish that if I did that that people would actually watch LOL

[@Skeer0]

@@LuisNapoles I know you did some when you were with motive, but for me at least it's cool to see how you can change a ball in a small or a big way with surface and to hear the situations that would cause to change surface.

[@nordattack]

Lou, why does Storm put that Gloss on the ball? Does Storm think the average lower rev, low avg house bowler will get a more consistent response if the ball is shiny and too much surface on it would give them a poor reaction they could not control?

[@LuisNapoles]

well all companies put polish on some balls but I think it'll just help them get the ball down the lane

[@kjracing1997]

Should I add 2000 grit on the ball I have 500 rn

[@nova_746]

Great video. I just got mine and out of the box it is hooking more than I like. Does this ball need a few games on it before it will tame down a little or should I take some of the finish off?

[@LuisNapoles]

If you mean hooking to much down lane then yea knock the shine off the ball

[@nova_746]

@@LuisNapoles Yes, down lane. I can get it down there, but then it cuts pretty sharp for my game. Really enjoy your reviews. Thanks!

[@nova_746]

@@LuisNapoles Just wanted to give you an follow-up and "Thank you" for the advive. I took a 1000 grit pad, then 2000 grit, then 4000 grit to knock the shine off my Phaze V. WHAT A DIFFERENCE!!! The ball is way more predictable and doesn't have the hard snap on the backend. First game in league with the new surface, 258!!

[@성문늘푸른빛]

스위퍼 샷.손등부분이 바닥과 수평상태에서 손목을 오른쪽으로 15도정도 더틀어놓고 쳐보시면요.그래서 위로 향해있는 왼쪽부위손가락들이 오른쪽을 향하게 해놓고 쳐보시면요.스위퍼 지지대 역활인 팔을앞쪽으로길게 뻗어서쳐보시면요.

[@LuisNapoles]

???

[@btk03z19]

Question... when you add surface to a new ball does it make it more susceptible to sucking up oil and dying quicker?

[@LuisNapoles]

Doesn’t make it die quicker no and it makes it earlier and smoother

[@TheShackGuy]

How about the Phaze V versus your favorite, the Hyped Hybrid. They line up right next to each other in the bowlingthismonth performance chart. Besides, you need to throw the HH again so you can appreciate what a giant killer it is. 😁

[@LuisNapoles]

I dont think I have ever said that bal was my favorite LOL

[@J002]

Surface with the pin up?

[@LuisNapoles]

I think it would make it to early

[@WillSchultz18]

Am a 2 finger bowler and have the phase 5 ordered, do you think it should be surfaced before using or test it out first.

[@joergdittrich6010]

No. First try it and then see what you want to adjust.

[@LuisNapoles]

I would try it OOB first

[@vanni9283]

As an aside, did you use the pin-up version or the pin-down version for this video?

[@LuisNapoles]

Watch the intro 😂

[@vanni9283]

@@LuisNapoles 🤦‍♂

[@vanni9283]

I wonder what the pin-up one would look like with a little surface???

[@bdatwood76]

Great, Great looking ball!!! You mentioned a comparison with the P2. What about the P3 and P5? P3 with a tad bit stronger cover.

[@LuisNapoles]

im gonna do all the phases

[@seniorxj2931]

What if you just hit it with a 3k abralon finish?

[@LuisNapoles]

Idk if the 3000 will get all the polish off the ball which is why I used a 1000 first

[@seniorxj2931]

@@LuisNapoles makes sense.

[@probowler2008]

Love the video so you started with a 1000 and then 4000. Was this done wet on ball spinner or dry?

[@LuisNapoles]

wet by hand

[@scottythompson940]

Cool video talk tech bowling luis storm praze 5 with nano technology in the bowling ball more strike hitting power at time

[@LuisNapoles]

👍

[@scottythompson940]

@@LuisNapoles yeah

[@lj7176]

phaze 5 with polish super shiny with fingerprints. phaze 5 with surface no more fingerprints but still kind of shiny

[@LuisNapoles]

rolls way better also

[@Sparky92891]

I’ve had thoughts about getting a phaze 5 but I have my phaze 2 and it’s been rolling well for me. Even still having thoughts about getting the hustle USA after a friend of mine told me how much she loves her USA. Yes compare the phaze 5 to the phaze 2

[@LuisNapoles]

I already have a P2 vs P5 video!

[@paulf4331]

Looks like you can throw that ball almost anywhere. 10 boards of miss room!

[@LuisNapoles]

love it

[@jeffladrillono2313]

P5 with the shine knocked off might be the best house shot ball in the SPI line.

[@LuisNapoles]

I dont think you're wrong about that!

[@willjames6437]

Polished Phase 2 compared to Phase V with surface please.

[@LuisNapoles]

that def wont happen lol I would do them both with surface though

[@larryhudson1963]

Could you please tell us the differences between the PHASES. Phase: 2, 3, 4, 5. Could someone just grab these 4 and make a good bag ??

[@LuisNapoles]

im planning on making that video!

[@homerlex]

I'm still waiting for someone to put the same surface on the P4 and p5 to compare...

[@LuisNapoles]

that prob wont be happening any time soon

[@shinobiassault2338]

Could u please do a video adding surface to the sky raptor please

[@LuisNapoles]

I’m on staff with 900 Global so that won’t be happening. Hopefully one of the Motiv guys can make that happen for you!

[@donaldmiller3356]

Use true cut pads by CTD

[@LuisNapoles]

no thanks LOL

[@noahwhipkey6262]

i definitely prefer 4k fast over 1500 polish

[@LuisNapoles]

same

[@noahwhipkey6262]

its obvious you are chasing p2 ball reaction btw xD

[@noahwhipkey6262]

and its ctrl+c ctrl+v :)

[@adamabdelaziz4586]

The Phaze V should be on Storm’s line forever.

[@LuisNapoles]

ehhhhh only time will tell on that!

[@aaronakers687]

Make a video of just you bowling and not cuts and shoot spares for 2 games livestream would be cool!

[@LuisNapoles]

I livestream league every Thursday night and livestream my practices sessions lol

[@tonybarber420]

Looks like your following in the footsteps er rather "footwork" of jr raymond

[@LuisNapoles]

not following anything of his LOL

[@stormb28]

Werewolf Lou

[@LuisNapoles]

just for now haha

[@NotQuiteEpic]

I don't understand why you calling it 'adding surface' when you are in fact 'roughing up' the surface. Adding surface refers to adding something to 'smooth out' the surface more. It sounds directly contradictory to the way you are using the terms.

[@LuisNapoles]

adding surface means applying more surface to the ball which is the same as "roughing up the surface" Smoothing out would be less surface

[@whitehondarider22]

Adding surface means applying more surface great explanation 👏🏻

[@whitehondarider22]

Nothing is being applied unless your applying a polish, You are simply changing the surface