Adjusting a Minn Kota foot pedel

[@robinsheltrafishing2634]

Just getting ready to put a Maxxum on a tracker, hopefully my new one won’t need adjusting. If so this was a big help, anyone that didn’t get anything from this video evidently aren’t handy, don’t listen or road the short bus! Thanks again.

[@scottmitchell7002]

Nice job on the video! Really helped me out. I saw another one and they forgot to mention the part where you take the tension off the cables.

[@jonathangiven9073]

I’ve got an 06 Nitro with the original MotorGuide trolling motor. The directional arrow is way off. I received some guidance on how to adjust the arrow…and if that doesn’t work…the tech says he’s just put a piece of duct tape on the cap with the ore t orientation. Seems simple enough if disassemble either fails or ends up in the “too hard to do” pile. Your mileage may vary.

[@swamp2saltoutdoors935]

You are the hero homie. Mines been driving me crazy with it being all the way down going straight 😂😂

[@HP-tr2cd]

Was it easy?

[@swamp2saltoutdoors935]

@@HP-tr2cd yes, just take your time. First time I did it, it didn’t work out and I gave up. Few weeks later I did it again only thing different was I pulled the peace he talks about all the way up and it worked.

[@keithosborn4711]

Where can u buy the arrow and stuff for the trolling motor

[@jimboainsworth883]

I replaced the shaft and foot on my Edge, but my cables are loose. I tightened the adjustment screw with no luck. Should I simply replace the cables or is there a way to adjust other than the screw?

[@andrewkonaf8881]

Just the video I was looking forward! Thank you sir

[@OneObjective]

Your welcome

[@NoBody-vs3lm]

I just got my first bass boat on Saturday and it's my first boat and trolling motor. I understand how the trolling motor works however the pedal is tilted all the way forward and it's almost impossible to operate. I thought it was broken but it seems maybe I just need to adjust the pedal? Do these instructions work with the base model edge 45? Thanks!

[@A.M.O.Adventures]

After the direction dial is rotated, pedal is level, the motor is facing forward, and covers are put back together...Do you then re-tighten the foot pedal screw back to the original desired tension?

[@KennethSchweitzer-l8x]

I want to know how to adjust the pressure it takes to move the pedal

[@shaneomacski23]

Would you happen to know if I disable the motor (propeller) would the unit still be able to spin around? Want to use my old one as a livscope stand alone mount.

[@darrellhanks8087]

I have a question my maxximum 80 # 24 volt my pro turns slow and when I change from 01-30 it still turns slow would that be the mother board please let me know

[@mikecraig9007]

Man, this was sooo helpful. Great video.

[@larryshawver52]

Thank you, it worked just as the way your video showed...

[@laramybohn1730]

Thanks I didn’t know about the screw on the foot peddle

[@pointblankokc]

Having the same issue on mine. Thank you for the video bud, I’ll tear into mine today !

[@r.l.hulbert3476]

Good luck, info 👎

[@KennethSchweitzer-l8x]

I want to know how to adjust foot pressure needed to move the pedal 4:04

[@thomase.piggott7383]

Great video keep up the good work

[@TeamMayo304Outdoors]

My fortrex when I take my foot off the pedal and the power is constant it will turn one way or the other so I can’t even retrieve bait or measure a fish without screwing up my spread of planers how can I tighten the tension up. New subscriber 😎

[@michaeldonaldson5322]

Buy a Troll Perfect

[@downsouthallah4800]

Will any of your mounts for the 1103 work on my kaku Zulu?

[@OneObjective]

Do they have the four bolt pattern for the powerpole

[@downsouthallah4800]

@@OneObjective yes sir. I was looking at your non actuated torqueedo mount the square looks bigger but I mean if all kayak brands use the same size for the power pole should be good then.

[@darrylgoerdel1179]

Thanks because mine was all screwed up ...all the way forward was like 3 o'clock.

[@OneObjective]

Glad we could help

[@markeydavid7532]

I would have like to have seen you actually make the adjustment. Showing me the inside of the head and telling me it’s super easy doesn’t give me what I need.

[@tropifiori]

Thanks

[@jdwj2408]

Yours looks opposite from the until to the propeller

[@kennethwood713]

that told me nothing ,

[@Okinanam69]

You took the words out of my mouth.