Simple how to on adjusting the top and bottom travel on your b730
Пікірлер: 226
@swradios Жыл бұрын
After 6 videos, some made my Chamberlain that tell you to adjust the open/close stops but don't tell how, I finally found your video that describes the process very clearly. Thanks!!
@jcx2bby Жыл бұрын
Thank you for commenting!
@dawho123 Жыл бұрын
Great explanation and this was much easier to follow than any other video out there or with the manual. Our garage door always sounded like it slammed shut and then would pop loudly when opening. Your explanation of the track bending helped me visualize the issue and fix the open and close distances perfectly. Thanks!
@jcx2bby Жыл бұрын
Thank you, humbly, for your positive response
@t.switzer820711 ай бұрын
What made this a 10/10 is how you’ve figured out how to ‘bump’ adjust it up or down. For the better part of a year I’ve tried adjusting it up and down through the manual instructions. Problem was too much downforce when closed causing bow, and when pressing close in the fully open position it would jolt and shock itself and revert to open again. Super annoying. Thanks for demonstrating that bump adjusting is actually permissible with this opener. Problem = solved!
@jcx2bby11 ай бұрын
Thanks for the positive feedback, really appreciate you taking the time to comment.
@joelshack853 ай бұрын
Thank you so much for the "popping sound" issue. All other vidoes never mention this issue. You saved me $189!!
@jcx2bby3 ай бұрын
Awesome! Well done.
@prezaricardo1749 Жыл бұрын
man this video is 4 years old, but help me a lot.. Thanks
@jcx2bby Жыл бұрын
Glad to help!
@USbachelor6 ай бұрын
You did the best job teach me how to fix this issue. Thank you!
@jcx2bby6 ай бұрын
Thanks for commenting!
@Rich322622 жыл бұрын
I use this for a gate opener and took about 20 tries to get the closed position exact. It didn't open as much as I wanted but I didn't want to have to nail the closed position perfectly again so I left it in a less than ideal open position. This fine tune adjustment is huge! Now I can go get it perfect. Thank you.
@jcx2bby2 жыл бұрын
Awesome, I am glad it worked for you!
@markwilkinson54013 жыл бұрын
Absolutely perfect “how to” video! Thank you so much for making this easy to replicate. You fixed my problem :-)
@jcx2bby3 жыл бұрын
Thank you for the positive feedback!
@infotechsailor Жыл бұрын
Video starts @2:27
@FernandoRodriguez-ds5ri10 ай бұрын
Nicely done my friend…nicely done
@jcx2bby10 ай бұрын
Thanks!
@marilynallen4458 Жыл бұрын
Thank you so much. I was about to call my garage guy and give him $40 service charge for 4 minute fix.
@jcx2bby Жыл бұрын
Awesome! Good on you Marilyn!
@kamikazi7773 жыл бұрын
Bang up job! I appreciate you taking time to produce a video far better than Chamberlain did. Thanks so much!
@jcx2bby3 жыл бұрын
Thank you! I appreciate you taking the time to comment!
@bohhica14 жыл бұрын
Saved me a service call of $47.50 paid in advance. Then another $ 40.00 for adjustments, lubing track, chain, and rollers. Thank you.👍
@jcx2bby4 жыл бұрын
Right on. Good on you for finding out how to do it yourself!
@kylescott62252 жыл бұрын
Thanks!! Lost my instructions… had a gap, and oak leaves here in fl… we’re all in the garage. God bless, stay safe Life is good 👍
@jcx2bby2 жыл бұрын
Thanks for watching.
@OldGeezer552 жыл бұрын
Thanks kiddo! There are other instruction videos but you show where the black button was located. Good work.
@jcx2bby2 жыл бұрын
Thanks for commenting!
@prestonparish Жыл бұрын
Thanks! Just what I needed to know.
@mechanic7417 Жыл бұрын
Check along the top of the garage door from the outside. And confirm there is no gap. If necessary adjust garage door closure as I had to do. Good video thanks.
@getupandgotransport6344 Жыл бұрын
Thanks for the upload saw one video on this he messed up my adjustment. Seen your video you fixed my problem .Thanks for the solve!
@jcx2bby Жыл бұрын
Glad to have helped. Thanks for commenting.
@heroknaderi4 жыл бұрын
Very helpful thanks I love how chamberlain made it easier to adjust the travel limits
@jcx2bby4 жыл бұрын
No sweat, thanks for the comment. I am not sure why they don't put these instructions on the opener itself though.
@MSU934 жыл бұрын
Seen a few of these videos this is by far the most detailed in layman's terms thanks
@jcx2bby4 жыл бұрын
Appreciate your feedback 🙂
@davewhite823 Жыл бұрын
Terrific video. Thanks to you I just fixed my garage door. Well presented and informative
@jcx2bby Жыл бұрын
Thanks Dave!
@timhall88563 жыл бұрын
Open up the garage door problems. Doing a garage door video helps out. Thank you!
@jcx2bby3 жыл бұрын
Glad to help!
@57hilliard Жыл бұрын
Absolutely the best video on how to troubleshoot!!!! Thank you!!!
@jcx2bby Жыл бұрын
Wow, thanks for the positive feedback!
@bmw5753 жыл бұрын
I just installed my chamberlain b970 yesterday and couldn’t get it to close, I do believe sir you may have solved my problem. Thanks so much for this video.. I’ll give give it a run and let you know..
@jcx2bby3 жыл бұрын
Alrighty, good luck with it!
@kimberleerodgers89003 жыл бұрын
Thank you, fixed my issue on the first try after watching your video!
@jcx2bby3 жыл бұрын
Awesome! Thanks for commenting
@CobraSpecOps4 жыл бұрын
Thank you for the assistance, I thought I was going to be limited on my vehicle and towable toys by the low door but got it to the full open potential now. Toys inbound!
@jcx2bby4 жыл бұрын
Woot!
@JT-ng2tk3 жыл бұрын
Can’t thank you enough. Now I don’t have to be frustrated all evening. This works perfectly!!!
@jcx2bby3 жыл бұрын
You are most welcome my friend. Thanks for the kind feedback
@id10tek3 жыл бұрын
Noticed high tension tonight...this FIXED the issue. Thanks!
@jcx2bby3 жыл бұрын
Sweet, congrats!
@jameyvillanueva6521 Жыл бұрын
You sir are a genius.
@reginaldbryan8704 Жыл бұрын
Thank you sooooo much for this video! It was the one out of the many I tried that actually fixed my issue! Greatly appreciated!
@jcx2bby Жыл бұрын
Glad the video helped you, thank you for commenting.
@sukhpreetbrar54462 жыл бұрын
First it gave me 1-5 error & then 4-2. I was going to call repair guy to fix the logic board or springs. But then I came across your video & it’s working now!!! I can be wrong but I’m assuming 100 degree temperature messed up and the machine was acting weird. Thank you so much!!!
@jcx2bby2 жыл бұрын
Awesome, glad you got it working! Thank you for commenting
@yorkie17922 жыл бұрын
I love you man. Thank you. You saved me $430
@jcx2bby2 жыл бұрын
Holy cow, somebody wanted to charge you that much to come out and adjust it? I'm glad you found this video and saved the money!
@jamilehsalameh66924 жыл бұрын
Thank you so much for this awesome video. Simple and straight forward. It helped fix the same exact problem and don’t have to call a technician. Thank you again
@jcx2bby4 жыл бұрын
You are most welcome!
@thesamsonfamily5495 Жыл бұрын
great video. you explained it really well. and showed what we are supposed to look at. Thank you!!!
@jcx2bby Жыл бұрын
Thank you
@ddddddddd162 жыл бұрын
very good instructions. Used it today. Thank you!
@jcx2bby2 жыл бұрын
Thanks for commenting johnny
@paulmerritt75403 жыл бұрын
Thank you so much! Now I don't have to search through ALL THOSE MANUALS in my drawer to find the one for my garage door opener!!!
@jcx2bby3 жыл бұрын
Lol, you're welcome Paul
@lisaraven16282 жыл бұрын
Oh my gosh I was struggling for an hour before finding your video / thank you SO MUCH!
@jcx2bby2 жыл бұрын
Sweet! Glad.to help.
@TheGel694 жыл бұрын
simple efficient video and .....it works, just implemented the content today @ my GF home and voila, done deal. thanks a bunch
@jcx2bby4 жыл бұрын
Great news, thank you for the comment
@pfx2454 жыл бұрын
Thanks for these instructions. My garage door has a small gap left when it closes fully. Will fix it now. :)
@jcx2bby4 жыл бұрын
Good luck with it
@damondicus12523 жыл бұрын
Same problem here, thanks for your time and instructions. Great help!
@jcx2bby3 жыл бұрын
Awesome, glad it worked out for you.
@amarabadli57132 жыл бұрын
Thank you very much. You saved my day.....
@jcx2bby2 жыл бұрын
That's awesome. I needed some good news today
@doncook3584 Жыл бұрын
Wow was dreading diving into this an you made it a breeze. Can’t tell you how long I’ve put up with slam. ❤❤
@jcx2bby Жыл бұрын
You got this Don!
@lescamartin1512 жыл бұрын
Thanks! This really helped me today!
@cherimitchell68383 жыл бұрын
hi this dave thanks for the help great video
@jcx2bby3 жыл бұрын
You're welcome, thanks for the comment
@ZachPerry4 жыл бұрын
Great video. I had the same issue and this got me fixed in 5 minutes.
@jcx2bby4 жыл бұрын
Sweet, glad it got you going
@kanakafarian3 жыл бұрын
Great video bro just helped me fix my chamberlain garage door thanks bro 🙏🏽
@jcx2bby3 жыл бұрын
You're welcome kind sir
@Grayback19735 жыл бұрын
Thank you for taking the time to make this!
@jcx2bby5 жыл бұрын
No prob, glad you found it useful
@skidmoro96424 жыл бұрын
loud pop is usually sticky door stop...mainly on hotter days........btw once the travel is set the arrows will blink because the opener has entered the force setting mode..not a test run..this must be done to complete programming
@trainwreckEMS3 жыл бұрын
Thanks worked like a champ!!
@jcx2bby3 жыл бұрын
Awesome! Glad to hear it
@peterkay24063 жыл бұрын
Yes i agree with mark wilkinson, perfect how to video! 👍
@jcx2bby3 жыл бұрын
Thank you Peter, I appreciate that comment
@r00t_4 жыл бұрын
Thanks for the tutorial. Saved me from having to go find the instructions for my opener. #firstworldproblems #lazy #chamberlain #garageopener
@jcx2bby4 жыл бұрын
Lol, thanks Jon, glad it worked for you.
@stevenjameso4 жыл бұрын
Many thanks. Worked great.
@jcx2bby4 жыл бұрын
You are welcome
@johnpinniss6949 Жыл бұрын
Thanks man 👍🏾
@darbycarpenter30323 жыл бұрын
Thank you. I have the exact same problem. Now I can correct it.
@jcx2bby3 жыл бұрын
You're welcome, good luck to you on this.
@isairamirez13 жыл бұрын
Awesome how-to video. Thanks!
@jcx2bby3 жыл бұрын
Thanks for your feedback, glad to help!
@omarlynn2992 Жыл бұрын
Thank you so much!!
@jcx2bby Жыл бұрын
You're most welcome
@antoniokfranco2 жыл бұрын
Solved my problem!! Thank you for the video
@jcx2bby2 жыл бұрын
Awesome! Glad it worked
@mikemiller94963 жыл бұрын
Exactly what was happening. Problem solved. Thank you.
@jcx2bby3 жыл бұрын
Awesome! Thanks for commenting
@Jotinko4 жыл бұрын
Nice tip. I know that the closing mode on my Door closes to far to where the Bar pushes upwards. My Dad isn't aware of this issue but thankfully I am.
@jcx2bby4 жыл бұрын
Yep, a sure sign it's holding tension and then bouncing up as it releases. Awful racket
@michelleguthrie84544 жыл бұрын
Omg thank you so much! This worked and helped and was so easy. I was stressing till I saw this. Thank you Thank you thank you
@jcx2bby4 жыл бұрын
You're most welcome Michelle
@joeyd312155 жыл бұрын
Thank you, clean and straight forward...good job
@jcx2bby5 жыл бұрын
I appreciate the comment
@michaelrobinson31423 жыл бұрын
Thanks a lot for making this video you helped a lot
@jcx2bby3 жыл бұрын
I am thrilled to have helped. Thank you for taking the time to comment
@DesertDirtRider2 жыл бұрын
Thanks. I’m going to try it.
@jcx2bby2 жыл бұрын
Good luck!
@DesertDirtRider2 жыл бұрын
@@jcx2bby It took a few attempts, and it worked!
@theVspot7133 жыл бұрын
Thank you sir
@jcx2bby3 жыл бұрын
You are most welcome
@elb94475 ай бұрын
Thank you
@jcx2bby5 ай бұрын
You're welcome
@devkin63 Жыл бұрын
Thank You
@jcx2bby Жыл бұрын
You're welcome
@BK-wy4uj3 жыл бұрын
Thanks for the info.
@jcx2bby3 жыл бұрын
You are most welcome
@b.r27153 жыл бұрын
Great video, thanks man, I just installed mine today
@jcx2bby3 жыл бұрын
Thank you for the positive feedback
@CM-hr8ou4 жыл бұрын
Thanks dude. Tons of vids on here where you have to use a screwdriver to adjust, but none where you have to use buttons (we’ve got the same opener). Much thanks. Idk if you’re having the same problem, but for some reason when the power goes out, I’ve always got to re-adjust my opener. Weird. 🤔
@jcx2bby4 жыл бұрын
Glad it helped you. I don't have that issue with mine...I don't think. The power rarely goes out here so maybe I just haven't had to deal with it.
@honestinsky4 жыл бұрын
Excellent video, thanks for posting, much appreciated : )
@jcx2bby4 жыл бұрын
You are most welcome
@shhussain18514 жыл бұрын
This was very helpful
@rogerbee61193 жыл бұрын
Perfect! Thank you.
@jcx2bby3 жыл бұрын
You're most welcome
@thegamechanger3793 Жыл бұрын
I have same model but my garage door opens 3-6imches and stops… I have to keep hitting open button multiple times to go up completely. I also noticed it’s hitting the main unit at force..
@jcx2bby Жыл бұрын
Could have a bad limit switch on it? That's weird
@2aalways3625 жыл бұрын
Great instructions very easy 🙏 thanks!!!!
@jcx2bby5 жыл бұрын
No prob, Eric. Thanks for your comment
@CoffeeLyfe4 жыл бұрын
super helpful. thanks for this
@jcx2bby4 жыл бұрын
Glad it helped
@RodiCtsV3 жыл бұрын
Thank you very helpful
@Liftmaster-sw2zy6 жыл бұрын
Awesome video. After you set the up and close limit that second run of the opener, what that’s doing is setting the force, how much muscle the opener needs to open and close the door
@jcx2bby6 жыл бұрын
Garagedoorpro20, thank you for the info, these newfangled openers are SO much better than old ones from years ago. Our old opener woke our daughter up if we used it. She never moves with the B730 in action!
@Liftmaster-sw2zy6 жыл бұрын
Chamberlain is an amazing company. They are super super reliable and easy to repair. If you ever wanted to, Liftmaster has the 880LM smart wall button. It tells the time/temperature, and if anything goes wrong with the opener, it displays the issue on the wall button.
@AJ-ds9xq2 жыл бұрын
Thank you!
@jcx2bby2 жыл бұрын
You are welcome
@carlosaugusto46433 жыл бұрын
Great video! I was looking on line for that information but you made this very simple. I have the same problem with my garage door. Know I can fix it Thanks
@jcx2bby3 жыл бұрын
Awesome, thanks for the feedback and good luck with your door adjustment
@user-qm8cc5go8r2 жыл бұрын
Thank you!!
@jcx2bby2 жыл бұрын
Thank you for watching
@MGRAY322 жыл бұрын
THANK YOU!!!
@jcx2bby2 жыл бұрын
Lol, no sweat, glad you found it helpful.
@Andre-Vids3 жыл бұрын
why the keypad or the remote can only work to open the garage door, not closing it? Thank you.
@jcx2bby3 жыл бұрын
Good question, that's an odd one to me. Have you tried clearing all programming from the opener and starting over? Press and hold the program button for approx 8-10 sec to remove all codes
@adrianjurj39662 жыл бұрын
Thank you, you just save me 130$
@jcx2bby2 жыл бұрын
Woot!
@angieg9781 Жыл бұрын
If I need to adjust the down position can I just do that or do I have to do the up also?
@PedroCastillo-yj7tq4 жыл бұрын
Thanks alot for this video
@jcx2bby4 жыл бұрын
You are most welcome
@Xx_eeveemocha_xX2 жыл бұрын
I got it thank!!!
@jcx2bby2 жыл бұрын
Sweet! I'm happy for you
@Xx_eeveemocha_xX2 жыл бұрын
Is there a way I can make it go little faster? Feel like it go slower after it broke …
@jcx2bby2 жыл бұрын
@@Xx_eeveemocha_xX not that I know of no. Sorry
@GreenHawkPictures3 жыл бұрын
Great video but I have the model with only 2 buttons and they are purple and black and I can not figure it out to save my life
@jcx2bby3 жыл бұрын
I have a different opener now (moved houses) and it might have those buttons. If so I will make a new vid and link it to you
@markito9793 жыл бұрын
Help, when I try to program, when I press the up button the door goes down and when I press the down button the door goes up help please
@whitedime4 жыл бұрын
great video! I would like to make my garage door open just a bit farther. How do i know when it can't go any further? does it have an automatic stop?
@jcx2bby4 жыл бұрын
I do believe it will stop on its own at a certain point.
@israelhuox42064 жыл бұрын
Gracias i did the adjustment.
@jcx2bby4 жыл бұрын
Nice!
@jimgale21813 жыл бұрын
I have the model LC500EVC .It opened the door and stayed up.it went up so far it hit the safety nut and bolt and broke the light lens,IT will not come down.what do i do?
@jcx2bby3 жыл бұрын
Doesn't sound good, lol. I have no idea how to help without seeing it.
@ericcharp43884 жыл бұрын
Thank you. This is what I’ve been looking for
@jcx2bby4 жыл бұрын
You're welcome , glad you found it.
@seanmahoney57193 жыл бұрын
Great video, thanks. My issue is that the door opens too slowly (it closes just fine but opens too slow). How do i fix that?
@jcx2bby3 жыл бұрын
I do not believe the 730 has a speed adjustment to it. Do you still have the manual for it? I no longer live in this house and can't check the opener
@seanmahoney57193 жыл бұрын
@@jcx2bby I actually have the 750 (not the 730), though the controls appear similar. Yes i have the manual but it only mentions "force" and not "speed"....i can totally adjust the travel distance as you have shown in the video but cannot figure out how to make the door go up quicker
@jcx2bby3 жыл бұрын
@@seanmahoney5719 then I don't believe it is an option on that model. I know that older openers seemed to always allow for speed but the new ones, except for certain models, don't.
@seanmahoney57193 жыл бұрын
@@jcx2bby ok thanks for responding
@CaptainSkidmark743 жыл бұрын
Any way to speed the the opener up? Mine is painfully slow..... we upgraded to go to the myq, but regretting it based on how slow this thing is.....
@jcx2bby3 жыл бұрын
I don't think there is a speed setting, unfortunately. I sold the house that has this B730 so I can't check for you....sorry.
@triplesped4 жыл бұрын
Thank u the wife is happy
@jcx2bby4 жыл бұрын
I wish that's all it took to make my wife happy! Lol
@triplesped4 жыл бұрын
@@jcx2bby im lucky
@kevinfoster66734 жыл бұрын
That did it!!
@jcx2bby4 жыл бұрын
Perfect!
@JPDUBSY4 жыл бұрын
those adjustments work for me but the garage door will only go down halfway and then travel back up. I was looking for a force adjustment to adjust more force but there is none?
@jcx2bby4 жыл бұрын
I don't know if there is any force adjustment or not. But it sounds like something is binding causing the return. Does the door operate smoothly by hand?
@JPDUBSY4 жыл бұрын
@@jcx2bby yes
@jakesnake2534 жыл бұрын
J Wiz ever figure out the problem? I have same issue.
@JPDUBSY4 жыл бұрын
@@jakesnake253 nope
@jessecannas4358 Жыл бұрын
My chamberlain only has a black button and a purple button I can't adjust the travel movements
@jcx2bby Жыл бұрын
Is it a B series opener? If not, it will have a different process....
@jessecannas4358 Жыл бұрын
@@jcx2bby is tte hd900h
@jcx2bby Жыл бұрын
@@jessecannas4358 lol ok, you're gonna have to find the right process for that opener then. This one won't work.
@tonezuni1195 Жыл бұрын
Mine won’t open with key pad
@iishyxvietxboyii14 жыл бұрын
I can set adjustment to go up but down wont work. Does that mean my motor is dead??
@jcx2bby4 жыл бұрын
Could be. But Id check your safety eyes first and make sure they're still in alignment.