Adjusting Hook Timing - Butterfly Embroidery machine (Sincronización del gancho de la bordadora)

This video covers setting the hook timing on a Butterfly commercial embroidery machine.
This operation ideally should only be done when all 12 needles are checked for proper needle depth (and damaged/used needles), and only then the hook checked to see if the hook is off from all of them equally.
When the hook is dead-on, and all 12 needles are dead-on (again, good condition needles), then it is very hard to get a thread break and it takes very little thread to catch properly after thread trims.
Hook timing is usually thrown off when a "birds nest" is allowed to gather in the bobbin area, and the spinning hook snags this mess and jams hard while spinning at a fast speed (600+ rpm). The hook assembly will then be forcefully rotated off of its place on the shaft. If bobbin is allowed to run out, a lot of thread will get jammed underneath fast also. Machines that have been run hard a long time will also drift.
Don't forget to clean and oil the hook every four hours (the black runner part)! Don't let any thread pieces sit on it!
Something I forgot to mention is the "nose" of the metal bar on the left, which is holding the hook in place as the hook rotates. The nose should be centered on the needle, and have a 1mm border of empty space, or an equal size border, between the nose and the black hook part that holds the nose.
Please watch the needle depth video before attempting any hook timing!
Listado de videos en español:
guia.mercadolibre.com.co/video...

[@james9789]

Oil the hook every day! What an awesome , amazing video such s well made professional clear to the point tutorial THANK YOU!

[@Andreizs]

Tank's so much, works perfectly for Brother PR-600 too!!

[@srivatsaa.r.9936]

ADJUSTING HOOK TIMING---BUTTERFLY EMBROIDERY MACHINE:-- SIR YR ABOVE VIDEO IS THE FINEST VIDEO EVER PRODUCED THAT I HAVE COME ACROSS SO FAR. HOW BEAUTIFULLY YOU TAUGHT ME HOW TO ADJUST HOOK TIMING WHICH IS SO IMP FOR ANY EMBROIDER TO UNDERSTAND. YR ABOVE VIDEO IS UNIQUE AND REMARARKABLE FOR ITS QUALITY PRODUCTION, FINE FOCUSSING, AND EMPHASIZING ALL VERY IMP POINTS AND INSTRUCTIONS IN ENGLISH WORDINGS WHICH NO ONE CAN MISS. THANK YOU SO MUCH. AFTER SEEING THIS VIDEO I FELT THE DAY IS LUCKY TO ME AND EVEN A PRIZE OF 100000 DOLLARS IS NOT EQUAL TO THE GAIN I GOT FROM YR VIDEO. THANK YOU ONCE AGAIN. SRIVATSA INDIA

[@MARIAMaria-dr1de]

Muy buen video Me ayudó mucho Gracias

[@lourdesriveraarteaga1853]

Excellent video!!! Thank you

[@prosigns100]

Works!!! Thank You! Quality Video. Gracias....

[@jogomez1988a]

Sabras como ajustar la aguja y el gancho de enhebración para una maquina que hace zig zag en donde la aguja se mueve de una lado a otro. Gracias por tu valiosa ayuda.

[@jacekztelelefonu]

How about a machines with zigzak stich? How to set timing to get proper stiches? And how to deal with hook assembly when basket get stucking every once in a while?

[@mehdiabbasi2790]

100% helpful thank you

[@GustavoAngilletta]

puede volver a subir el video con una transcripción de lo que se dice en el vídeo (en inglés) para que lo suba a la sección de subtítulos (como un archivo de texto simple) con la opción Transcripción Beta* y KZbin automáticamente los sincronice usando el sistema de reconocimiento de lenguaje

[@123reivax123]

thank you ... a proper tutorial!

[@Pizdunchik]

I wouldn't say that it is right. You have to turn your main shaft to 200 degrees (I prefer 200.5). Who have Brother PR600 - your point is 199 degrees. If you will set 198 - you will have tight loop, it is good for "hard" fabric. If you want to make embroidery on thin fabric - you have to set hook timing on 201-202 degrees. But thank you for video. It is really good!

[@axwisback]

Hook and needle Gap is so far . This moment sewing as possible?

[@josuebordados4680]

me gustaria k apreciaran en español este y otros videos

[@vimre100]

Perfect video,great job,thank you

[@sonylal2962]

Sittil sahi karna hai

[@angeltbs]

Hello someone says this is similar to the Renaissance Embroidery machine, anyone confirm?

[@lahavenz]

thank you

[@abbasgamil1452]

Thanks soo much

[@hepiyellow]

Cool! worked for me on my girlfriend's Singer 191d. Thanks a lot ! Don't need to call a tech (-:

[@alistar1040]

Cool video

[@chrisg2004]

Thanks you. This has saved me a ton. My machine is an industrial machine, and I couldn't find anyone to come out to fix it. You have save my bacon.

[@dabgarsanjay1677]

Good

[@mdtipusultan7086]

thread triming problem. 3jum can not change to 5 jum or 7 jum. Plz give me solution

[@ButterFlyEmb]

You can email support at [e-mail]

[@lewisdiaz260]

LO PUEDEN TRADUCIR AL ESPAÑOL

[@jitender908]

very very thanxx sir

[@debbosolutions]

Best

[@ButterFlyEmb]

Thank you!