Adjusting Side-bySide Refrigerator Temp Controls - Actual Temp

[@scotters201]

Thank you..I wish temp control display had a non sleep mode..that would keep the temp display light in front instead of fading off..everything else about fridge love

[@geappliances]

Thanks for taking the time to share your feedback, scotters201. We will share your comments with our engineering department. We always appreciate customer insight. We're glad to know you otherwise enjoy your GE refrigerator. We know you will love it for many years to come! Be sure and let us know if any additional questions come up!

[@geappliances]

newdrt - To set the freezer control on your refrigerator, start at 5 using the Warmer/Colder touchpads. Allow a minimum of 12 hours for stabilization. Then check your food. If not freezing properly, adjust the setting one number at a time using the Warmer/Colder touchpads, ie. higher number for a colder freezer, lower number for a warmer freezer. Please see our GEAppliances website if you need further assistance. - Thanks, Michelle with GE

[@mattfrazer3278]

We have a g t in apartment the ice stopped workin lg they replaced the water filter what temp we set the freezer ice start working that k you

[@linettyromero]

Why does it take 12 hours to start working again!!!

[@twoweeklifespan]

if you read the comments listed you will notice GE doses not have any real help comments to answers but to call a tech good job GE keep your guys working

[@x2malandy]

dale Mcclennon, Yes I noticed that and I am pretty far down on the comment section. My pretty and 2 yr 3 month old $1,100 GE side by side took a crap. I had to fire up the 30 year old fridge that I replaced it with to save some of the food. Over 30 yrs of use, I replaced 2 fan motors and a couple of plastic rack holders. No help at this site. They don't make them like they used to.

[@КристинаБочегова]

Your content is so touching

[@JorStratMIM44]

Is there a way to kick off the defrost heater? I think the door was cracked open last night and the actual temp of the refrigerator is 42F and the actual freezer temp is -4F. I am hoping to quickly defrost any frost built up overnight with the heater.

[@rachelgwinn9043]

When I click the buttons on it. Nothing happens I believe it's broken. But the fridge works, but I can't change the temp. Of the fridge

[@YeahRight825]

Hi, I see in all of your responses to reset the control panel, that you instruct to shut off the circuit breaker for at least a minute. Wouldn't it be the same thing just to unplug it from the wall for the same amount of time?

[@eugeniacuevas5008]

We have GE refrigerator, side by side. Freezer still producing ice but the refrigerator side is not cooling enough. When I press the cooler button on refrigerator side actual reading is 2.32. Try to adjust for higher temperature by pushing the colder button, it changed to 32 no more #2. Is that like 32 degrees f? Please advise. Thank you.

[@ytytaraujo]

My has the same problem do you have an answer?

[@geappliances]

Thanks for letting us know, armitageallembert! We're glad to be of help!

[@DNL2763]

Hi i need tog28pfcgww manual where can i find it?

[@HungPham-ll5ti]

How my can’t turn on

[@revathyrevathy5278]

The video sound is pretty good, beyond my imagination

[@henrytumidajski728]

I HAVE A GE SIDE BY SIDE FRIDGE JUST LIKE YOUR VIDEO. MY PROBLEM IS A FROZEN FROZEN WATER DISPENSER LINE.CAN I TURN OFF THE DIGITAL CONTROL ON FREEZER AREA ONLY.

[@christinelwhite3424]

We had a power outage that digital control panel is dark now is there a reset? Lights on in frig ,& freezer power went off twice how can I reset it maybe wait over night?

[@raymondhernandez7232]

I need to know How to reset this kind of refigirator, same front panel

[@barbthomas5]

I have this model and found the video helpful .... but I have a question --- if the power goes off for the house ( and frig ) does the frig hold the settings or go to the default settings again ?

[@berneyantoniosanchezvillar9440]

ALGÚN VIDEO EN ESPAÑOL DISPONIBLE PARA REGULAR LA TEM. DE MI REFRIGERADOR. GRACIAS

[@jahirrosales012]

ya pudiste?

[@4touchdowns1game29]

Why can't people just make videos on how to do something that is adequate length this video literally only needed to be like 20 seconds long.

[@vlrissolo]

my h2o line keeps freezing! if i crack the door on the freezer for around 5 hours, it starts working again. what temp. should i use to avoid this?

[@ExtremelyClever555]

Thank you very much for this video. It helped me out a lot.

[@LinhHa-sd4zf]

Something is wrong with my frig, GE cafe model CSS25USW, the “actual temp” is @ 30 on the Freezer side, why? Please help, thanking you in advance.

[@MrRddass]

hope I will get solution for the GE Refrigerator, When i go to setting to put at company setting it comes back to setting which is not cooling both fresh food section and freezer. How to set to set temp so it does not goes beyond the desired setting

[@UnitedCanuck]

I bought the fridge in Canada. Can the temperature b changed to Celsius? I do not understand Fahrenheit.

[@SpiralOwl]

Great video, thank you.

[@geappliances]

Thanks Jose, we're glad it helped! Thanks for choosing GE Appliances! -NC

[@dsm91awd]

I have a GE model that seems to be this very one in the video. It's a side-by-side model # GSS25QGTA WW. The bottom half of the freezer side and refrigerator side seem to be cooling the bottoms of each side, and not the top. A friend tried cleaning the coils, but it's the same. After a few days, and even a 20lbs bag of ice from the supermarket in the freezer, the digital display actual temperature reads: 15 for freezer, 55 for refrigerator. The seals around the doors are in great shape, and the doors are not askew in any form away from the unit, and it is level with the ground. It's never been laid down that I know of, and I don't even know what year this fridge is. Any information at all would be very much appreciated as to what I could do to repair this problem. I absolutely love this fridge, and I don't know if it's just mechanical failure, or human error which brought these problems on.

[@geappliances]

In this situation we would recommend calling a service technician at 1-800-432-2737. Note: the model is 9-10 years old so though we'd recommend service first, if you chose later to the replace the model altogether here is a link to our current SxS models: products.geappliances.com/appliance/gea-category/refrigerators?TYPE=Side-by-Side

[@dsm91awd]

I sure appreciate you

[@geappliances]

No worries Ross.

[@Diva330]

Did you ever figure out the problem? I’m having the exact same issue right now with mine.

[@bellashah6178]

@@Diva330 I was having the same issue and it was the evaporator fan motor. Hope you got it fixed.

[@ase2060]

My freezer is empty at all times, I'm trying to set warmer but won't go warmer then 0. Would setting freezer warmer keep compressor off longer?

[@pyrsosavlo6757]

Hello - I woke up this morning to see my settings displayed on my refrigerator. The freezer is at 13 and the fridge at 45. What could have possible happened? I tried setting it to the actual temp (0 & 37) but it's still showing 13 & 45. Does it take 24 hours? And why is it still being displayed? Is it trying to reach that temperature? Please help.

[@geappliances]

+Pyrsos Avlo We're sorry for any inconvenience and we're glad to help, Pyrsos. When you try to set the actual temperature, does your control show your new setting for a short period of time before it goes back to 13 and 45? If so, it can take a little while for the refrigerator temperature to stabilize to your new setting. If your control will not allow you to select a new setting, try resetting your circuit breaker. If your temperature does not improve, here is a link with some suggestions we hope will help: products.geappliances.com/appliance/gea-support-search-content?contentId=21185

[@jocelenedocarmo5212]

@@geappliances socorro meu refrigerador não volta ao normal para 37

[@jakeb70634]

My colder button on the fridge and the warmer button isn't working on the freezer. This morning I got up and the freezer was running, so I checked it. It somehow set itself on -6 and I can't change it. Is there away to reset it back to the factory default?

[@jakeb70634]

I cant turn it off cause only one warmer button works, so I need another way. Thanks

[@geappliances]

Hello Jakeb70634, We recommend resetting the electronics by flipping the breaker off or unplugging the unit for a minute. (During this time don't open the doors). If this doesn't help. We recommend contacting GE Consumer Service at 1-800-432-2737.

[@Malinois_Whisper]

Moved into a home that had a 5yr old GE Profile FSS6PKX Side by Side. The climate control is freaking out. Chime alarm continually beeping. When I hold down the energy saver and alarm buttons it turns all but the filter icon off. This seems to calm the beeps down. But eventually the chimes return and the 38deg and -2 freeze icons. Start flashing and jumping in tremp (hi low hi low etc0 I Tried unplugging to hopefully reset. That did nothing. . Seems to come and go. Any hints as to what is causing this?

[@Eric-vn9sm]

Does the adjust temp ever get to the same as the set or it's not suppose too?

[@geappliances]

Hello. When you adjust the temperature, you’re adjusting the set temperature of the unit. The actual temperature of the refrigerator and freezer may vary a bit from the set temperature/the temperature you adjust - this is normal. We hope this helps. If you have any other concerns or questions, please let us know the model number of your specific refrigerator. With that information, we can certainly review further. All the best! -SG

[@dianeholmes4783]

I have a GE estilo-smart fresh refrigerator...model # on booklet is 200D9102P001...the refrigerator was moved out a few feet when installing a new floor (unplugged). After moving it back, we noticed that the digital gauge is blank/dark/not on...now there is also water occasionally leaking inside. How do we correct these things? Please help!

[@geraldvogel2267]

I have model pgcs1rkzass the freezer and refrigerator temps are correct but ice maker temp is 25 degrees. any solution to this problem

[@briangustafson5871]

I have a GE with electronic temp settings. The refrigerator temp randomly resets to a different temp and beeps each time like when you push the button yourself. What could be the problem?

[@mr1bienvenu1]

Mine is reading 33 and 77 but the temperature in both side seem fine. What's wrong with my display?

[@PaquitaMolina1971]

Hello! My side by side has the digital temperature from 1 through 5. Wich number is the coolest? And what is the best temperature you recommend? Thanks!

[@geappliances]

Hello Paquita de Luque, Thanks for your question. I will be happy to help. The recommended temperature is 37 degrees for the fresh food and 0 degrees for the freezer. The 5 is going to be the coldest setting on your temperature dial. Please see the link below for some additional information that might be helpful! www.geappliances.com/search/google/infobase/10001020.htm Have a good day!

[@nabilhaidar3105]

Our freezer makes a lot of ice cubes and then the water stop coming out ?? We keep temperature at 5 for freezer but it seems like it is freezing the tube for the water

[@eagleeagle724]

Hello GE Appliances I have a GE model GSH25JSTA SS, the control setting from 0 to 9 ( 9 is coldest), so how can I set up the number correcting for freezer and refrigerator ?

[@geappliances]

Hi, Eagle Eagle. Thanks for your inquiry. We are happy to help. Please take a look at page 6 in the use and care guide, found in our following link: products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-60514-2.pdf Be sure and let us know if we can be of further assistance!

[@susanhannon9328]

The water dispenser was not working so I changed the filter as it was due anyway..within 30 minutes or so it sounded like water was going through but still no water....What do I do?

[@joanramdass423]

i need help please i have a 19 cubic samsung side by side refrigerator with the display panel the frige light is coming on the display panel is coming on but it is not cooling at all any tips

[@thatweirdanimegirl]

How do you set freezer temp to - 24 degrees celcius and -11 degrees Fahrenheit

[@SK-mr5ht]

I have GE refrigerator PSS26MSW. When I set 0F and 37 refrigerator, even after 48 hours, it is showing 25 and 44. How to set my freezer to 0 and refrigerator to 37. Please advise.

[@geappliances]

You can find the instructions for this on page 5 of the Use and Care Manual here: spklr.io/6056SEae If you feel as though there's an issue with the temperature controls on your refrigerator, we recommend reaching out to our service team by calling 833-426-3393 (Monday - Friday: 8 a.m. - 8 p.m. ET; Saturday - Sunday: Closed) for further assistance.

[@adamsteinmetz8766]

I have a brand-new 33in, French Door Slate. Plugged it in. After 18 hours, there was no cooling at all. Does it take longer than that for the new refrigerator to start cooling? Also is there a code to show what non-numerical symbols are on the temperature control? It started at 37 but then went to some letters.

[@geappliances]

Hello Adam, Thanks for purchasing this exciting new GE French Door Slate model. It should have started cooling immediately reaching set temperature after about 24 hours. Please contact our GE Consumer Service to have them diagnose and adjust this for you: www.geappliances.com/ge/service-and-support/service.htm?ICID=GEAR supportflyout-service Let us know if you need anything else. Thanks -SF

[@adamsteinmetz8766]

To be honest, I called GE Consumer Service. They couldn't get a service tech out to see me for five days. I had already lost 150$ worth of groceries and frankly, the customer service rep was very rude. I was then informed that I couldn't return the item because 48 hours had lapsed since purchase (which wasn't true). It took a week for it to be delivered. Home Depot thankfully took care of it and we went with another brand. Its a shame because we loved the actual product, but while I understand a product not working right away I was worried about what would happen in the future because of my terrible first experience with the customer service.

[@geappliances]

We're very sorry to hear of this unfortunate experience, Adam, and hope we have the opportunity to win your loyalty back in the future. -NC

[@jkelam7245]

side by side. food amount has fluctuated. so cannot say for sure if it contributes to the situation or not. we did add a couple of things and it went up to 33 from 30 and even though i press until it reaches 45 and it goes back down every time. have done this at least 3 times every day. sometimes it returns to 30, sometimes 33

[@geappliances]

+j kelam Gotcha...I know you were hoping for another outcome but at this point we would recommend calling service. If they've already told you that you'll need to replace your control panel then that's probably what you'll need to do but I'd work with the team to be sure.

[@Mcchesserz]

Hi. I have a GSL25JFXLB. For some reason the freezer just stopped working today along with the temperature control. The fridge is working along with the lights inside. It's just the freezer and the temperature control (like the one on this vid). Do you know how I can fix this?

[@geappliances]

Hi, Ben. We're sorry for this issue you are experiencing and we're happy to assist you. Please take a look at our following link which offers some suggestions: www.geappliances.com/search/google/infobase/10000326.htm We hope this helps!

[@jamaican1876]

Can someone please help, the power company shut the lights off and when it came back on the display panel has 00 00 all zeros and I can't set it back to the recommend temp which is 0 for the freezer and 37 for the refrigerator 🤦‍♀️ what can I do to restore the recommend temps?

[@dorrieannebrooks3945]

Whirlpool side by side what temperature should it be set at?

[@orianaguanoluisa1480]

Ya cambié bimetalico 2 veces, resistencia buena y aún se le hace hielo y no enfría

[@leaannhampton4310]

I am a raw dog food feeder. I am used to keeping the fridge side colder than the default 37. I can’t seem to lower it past 35. Is that normal?

[@geappliances]

Hi! We’d love to help. Could you please confirm your model number for us? To find this, please follow the information here: spklr.io/6052YEgE. Thank you. -GD

[@cjschmitt4882]

So, you can only adjust it by one degree at a time every 24 hours?

[@bettyguerrero6148]

What should your refrigerator be at what should your freezer be set

[@darn_itz_mar3424]

my freezer says its actual temp is 50, I set it at 0 and when I see the next day, it is back to 50 again. what is wrong?

[@RamKumarKoditala]

Hello, I have the same problem. any solution?, thank you

[@geappliances]

Hi Ram - there are a number of things that can cause a refrigerator not to cool properly. Please visit the following link for things you can check: products.geappliances.com/appliance/gea-support-search-content?contentId=21185 Thanks -CC

[@jahirrosales012]

@@geappliances i have the same problem to

[@thebeaun7646]

I have a GE profile PFSS2MIYC. Our temperature is great on our freezer, -1 to 0 degrees, but our refrigerator is reading too cold at 27-30 degrees. I keep trying to set it to 37 degrees but still returns low. What can I do?

[@geappliances]

Hello - Please review the following link for next steps to take: products.geappliances.com/appliance/gea-support-search-content?contentId=23002 . -TS

[@GustavoAPerez-mr4rw]

It stays the same on the freezer it’s 23*F and the refrigerator it’s 42*F

[@newdrt]

GSH25JFTA BB specifically ... i'm quite sure i'm not setting the freezer correctly. (yes i'm having the same issue of water line freeze but i'd still like to know the procedure)

[@chris92S]

Alright this is a long shot, but my fridge has a display like this but no option for actual temp. Does anyone know what I could do?

[@mattusctrojan]

purchased home in 2014 with new GE side by side fridge model GSCS3PGXGFSS SERIAL IS LA 403850 it cools fine in the freezer and fridge however, the display where you dispense water and ice is acting weird after a power outage when you press the lever for ice or water it flashes the temp and does not dispense water or ice tried unplugging it and same issue also tried resetting the display by setting it off by raising the temp, then hitting cool to reset to factory default, still flashes temp and does not give water or ice any ideas?

[@geappliances]

Thanks for reaching out to us, Matt. We are sorry to hear this has happened with your GE refrigerator and we want to help. Please try unplugging your unit for several minutes to cause a reset to your controls. If needed, here is the link to our GE Service to diagnose and repair this for you: www.geappliances.com/ge/service-and-support/service.htm?ICID=GEARsupportflyout-service Thank you. -SF

[@mattusctrojan]

That was the first thing we tried

[@geappliances]

Matt, please arrange for a GE service call: www.geappliances.com/ge/service-and-support/service.htm?ICID=GEARsupportflyout-service Our GE technicians will be glad to assist you further. Thanks for working with us. -SF

[@arthurlindemanis5014]

Hello. I have a GE model GFE29HMDCES, side by side. The fridge compartment has been stuck on 34 degrees and won't change up or down on the control panel. The freezer will adjust, but not the fridge. Please help !! :-)

[@geappliances]

Hi, Arthur. We're sorry for any inconvenience. A good thing to try for this issue would be to reset the refrigerator's electronics by flipping your circuit breaker off for a short time, at least a minute. Thanks for reaching out to us!

[@bostonvedemdo799]

Hello, Sir or Madam, My GE refrigerator's actual temp is 21 and 48 now. How i can reset it back to the factory-set temperature? Please someone can help me this.

[@geappliances]

Hi there. We hate to hear you’re having an issue with your refrigerator’s temperature - we know this may be concerning, and we want to assist. Can you please provide the model number of your refrigerator, here or with a private message over our GE Appliances social media (such as Facebook or Twitter)? With that information, we can certainly look into this concern further. We hope to hear from you again soon, so we can help. All the best. -SG

[@ladycolmenares713]

THANKS FOR THE INFORMACION, ITS USEFUL

[@geappliances]

We are glad to assist, Lady Colmenares.

[@surfer103]

We recently had a power outage and my fridge side stopped cooling. I followed the instructions and I still have the same problem. Any suggestions??

[@geappliances]

We are sorry to hear this happened. If there was a short power outage, the compressor overload will cycle on & off (not the compressor) until the refrigerant system equalizes at which point the compressor will start & refrigeration will resume. If this did not occur, try unplugging it for about five minutes & plugging it back in. Otherwise, contact GE Factory Serv at 800-432-2737 or online at: www.geappliances.com/ge/service-and-support/contact.htm?icid=GEARsupportflyout-contactphone -NC

[@surfer103]

Thank you very much for the reply. It was very helpful. Hope you have a nice day.

[@keonding]

The display panel on my GE refrigerator (side-by-side) is now blank after a power outage. Power is back on and fridge is on. How can I reset the display panel on the GE refrigerator (side-by-side)?

[@geappliances]

Hello Keon - We're sorry the display is no longer working. We recommend to disconnect the main power supply (normally your home circuit breaker) for about five minutes. Once power is restored, if the display does not come back, then we recommend contacting GE Factory Service at 1-800-432-2737 for assistance. We hope this helps! -NC

[@dkdk-vy8jj]

Want to adjust temperature on GNE29GMKFES side by side. I see the temperature gauge on the left hand inner fridge door panel but not a way to adjust up or down. Most of your videos show an up/down arrow or something like that on other models. Frustrating. Help

[@geappliances]

Hi - you can adjust the temperature on this model. Here is a link to the use & care manual. The instructions for using the control for this model are on page 10 (your model is control type D). Here is a link to the manual: products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-60792-2.PDF Hope this helps -CC

[@newdrt]

is there any help for the models without the 'actual temp' ?

[@Drknlve]

My power went out and I need to reset my refrigerator PSS26NSTC. The lights are on and it is cool inside my not cold like before. The digital display is not set. When I hit it just blinks O and goes off.

[@geappliances]

Hi, Donyata. We're sorry for your experience and we're happy to help. Please try turning off the circuit breaker to your refrigerator for a few minutes and then restore power. This may reset the internal circuitry and allow you to reset your temperature. We hope this helps!

[@zurdoremi]

why so dammed difficult and non-logical?

[@Vonda31385]

I have the ge refrigerator ps cs5 vgx and I cannot get the refrigerator to get cool. Im having issues with changing the temp. PLEASE HELP!

[@geappliances]

+Shavonda Newton Thanks for reaching out to us. If your controls will not allow you to select a new temperature, please try resetting your circuit breaker. Leave it off for 5-10 minutes and then restore power. This may reset the internal circuitry and allow you to make any necessary adjustments.

[@priscillarivera604]

After set it what do you press ?

[@leticiajanethvargas2756]

How Works The ice maker in This model?

[@jkelam7245]

I have the problem that the freezer stays at zero but the fridge won't stay at 37. It drops to 30 and 29 even. What is happening? We had the computer board replaced because it shut down, they are telling us now we have to have a new damper, not a cheap part. I have tried unplugging, resetting the computer, I reset the temps and it just keeps dropping the fridge temp

[@geappliances]

+j kelam Sorry for our delayed response! Have you been able to get this sorted out? If not, what kind of refrigerator do you have? ie. side by side, bottom-mount, top freezer. And is there a sufficient amount of food in the refrigerator to absorb the cold air?

[@洪杰董]

Character In the video It's great, I like it a lot $$

[@carlitoswey8705]

Hello, i just bought my General Electric refrigerator and when i hit the warmer or cooler option it just flashes 000 over and over no matter what i press. Help me please

[@geappliances]

Hi, Carlos. We regret any inconvenience! If you haven't already done so, please try shutting off your circuit breaker for a minute or so. This will reboot the electronic circuitry for your refrigerator. We hope this helps!

[@kayless0]

@@geappliances Tried that, still flashing. Tried pressing the 4 arrows, also checked connections under door. This is brand spanking new out of the box,

[@jocelenedocarmo5212]

Socorro, não consigo voltar o meu refrigerador para 37 fica 56 e vai subindo sozinho

[@jamesliu1908]

Hi, I have a GE side by side profile refrigerator. After a power reset, the panel just showing or blinking zero “0” and won’t let me set the temperatures from the display. So far no luck, both freezer and fridge sides are not cooling. Anyone have the same issue? Please advice. And yes, I have tried 5 mins circuit breaker reset and unplug already.

[@rafiben-david3396]

yes, me too have the same problem

[@scotters201]

The Temp buttons after you press them..shut off after about 5 seconds..is there a way to keep them always displayed on the frig?

[@geappliances]

Hello Scotters201, Thanks so much for your question. I will be happy to help. There isn't a way to keep the temperature displayed on the control. It will fade away after a few seconds.

[@leetcheez]

GE Appliances I had the same question. I would have liked an option to see the current temperature always displayed. I was disappointed to see it go off.

[@geappliances]

Josh Richards Thank you for your suggestion! We have forwarded your comments to our engineering department. We are always interested to hear what our customers think!

[@lindabretz5772]

I too just sold my Frigidaire Gallery Refrigerator that always displayed the temps and was disappointed to learn mt new GE fridge does not display temps all the time. Is there a fix for this??

[@geappliances]

Linda, If you can provide us with your model number we are happy to review the features to ensure that your model is operating as designed. AS

[@jocelenedocarmo5212]

Refrigerador não quer sair dos 61 graus. O que fazer?

[@deliriumh2o406]

How can you stabilize the temperature of the freezer because it's at 29 and the refrigerator is at 50 and we try to adjust the temperature but I can't

[@geappliances]

You've done everything right it just sounds as if you're refrigerator is having a cooling issue. We'd recommend giving our service team a call at 1-800-432-2737 for assistance with this.

[@pedroalonsoromeromorales9746]

Mi control de temperatura tiene prendido el led de water y el de ligth y cuando oprimo cualquier botón no lo respeta ni cambia nada.

[@claudiaking1455]

I like to keep my fridge colder than 36 because I often keep uncooked meat for more than a day. in the last week, the fridge will not stay at the temp I set.

[@geappliances]

Hi Claudia. We are glad to help. Make sure that both the refrigerator and freezer contain a reasonable food load. Closed containers of water, food or non-perishables will help to stabilize the temperature. This is because the items in the refrigerator absorb the cold, and actually work to help the refrigerator maintain a steady temperature. The more items in the refrigerator, the less cool air is needed to keep the refrigerator cold. Make sure the doors are closing properly. Thanks - RF

[@jasonrivera8902]

My fridge isn’t cooling the fridge is currently at 50 degrees and my freezer is at 20 ive tried to adjust the temps nothings working

[@sandrathomas7631]

everything in my fridge freezes I have set on 4 now but didn't help and my ice maker and water Despenser keeps on freezing up what should I do

[@geappliances]

We regret to hear of your issue, Sandra. We suggest contacting service at the link below: www.geappliances.com/ge/service-and-support/service.htm?ICID=GEARsupportflyout-service

[@cjporter84]

hi, I've been following the instructions on this video and there's no charge on my appliance. the actual temp is 24 58, I turned it off and it didn't go back to the manufacturer 's default setting

[@geappliances]

Hi Cjporter84, I am sorry for your inconvenience. If you were unable to change the temperature by following the directions shown in the video service may be required. Should you require service, go to the link below: www.geappliances.com/ge/service-and-support/service.htm?ICID=GEARsupportflyout-service

[@williamsly1978]

Is there a way to just turn off the freezer ?

[@geappliances]

Hi, William. Thanks for reaching out to us. While you can adjust the settings to funnel more cold air into the fresh food compartment, you cannot turn off the freezer department, alone. To review additional details on the operation of the controls for most GE models manufactured after 1995, please take a look at our below information: Fresh-Food Controls: The freezer supplies cold air to both compartments. Cold air is circulated from the freezer to the fresh food compartment via a damper. The fresh food control regulates the damper between the two compartments by controlling the amount of cold air that flows into the fresh food compartment. Freezer Controls: The higher the setting, the longer the compressor runs and as a result the colder both sections become. The freezer setting determines the compressor and freezer fan running times. Turning the freezer control to OFF shuts off the compressor and consequently, shuts off cooling in both the fresh-food and freezer compartments. Note: These are the models with numbered controls. On single control models, insert a coin into the slot in the middle of the dial and adjust the control. The simplest way to determine which control determines how long the compressor will run and in effect, how cold the entire refrigerator can become, is to look for the control with the OFF indicator on the control. Be sure and let us know if any other questions come up!

[@candlelove0952]

How come when I click the freezer buttons to bring the temperature DOWN, the lowest number it displays is a -6? Everything in my freezer is not nearly cold enough. I can’t fix it! -6 is the lowest I can get the freezer temperature to go down to...

[@ronaldvalentine1969]

I set the temp and waited,hit the cold button and the temp was the sane before I re set it.what’s wrong

[@geappliances]

Hi there. We’d love to help with your refrigerator. Please reach us via social media (Twitter, Instagram, Facebook) with your model number. We’re standing by and ready to help. -GD

[@bonnieleshoure9025]

I’ve got aside by side freezer the controls are off

[@jkelam7245]

forgot to say it is a GE profile arctica, model PSS25NGNA.

[@Justin34829]

If you dont have actual temp how do you set it?

[@geappliances]

Hi Julie, what is your model number and we will check on this for you? If you need help locating this number please see: products.geappliances.com/appliance/gea-support-search-content?contentId=19129 Thanks -SF

[@HelpdeskHonky]

My water line keeps freezing and I have the freezer set to 5. The stuff in the freezer still has frost on it set at 5. Is there any way to set it higher than 5? Defective product. 👎🏻

[@eagleeagle724]

Thank you.

[@geappliances]

It is our pleasure to assist you, Eagle Eagle!

[@enrikjj7935]

My GE fridge is not making any ice cubes or freezing my groceries . I just bought it 2 yrs ago

[@geappliances]

Hello Enrique, we regret to hear of this experience with your GE refrigerator and we want to help. This is our GE troubleshooting link as well as our service link if needed: products.geappliances.com/appliance/gea-support-search-content?contentId=21185 I hope this helps! -SF

[@scottsmith4934]

so how to shut a fridge like this off besides unplugging.?

[@geappliances]

Hello Scott, thanks for reaching out to GE Appliances with your question. We will be glad to help. Simply press either warmer button until it reaches the highest number and starts to flash and then do the same with the other warmer button until OFF appears. These instructions are also listed in the video above. Thanks for checking! -SF

[@dougwylde]

Twice my fridge has just stopped working. Display goes dark. But inside lights work. Then after a week it turns on and works fine...... lot of money in food lost. Never buy a GE fridge. GSL25JFTAbs

[@feliciadutton7995]

My screen is out on my door and my freezer is freezing the water as it comes out of the hose into the ice maker

[@jungapo2]

waiting for 24 hrs is too long for temperature change. my samsung refrigerator will change its temperature after 30 minutes.

[@kathyb-007]

This is an older version but I suppose the same idea applies. Shit I didn’t know about waiting 24 hrs between each change. My fridge is too cold and freezing up all my yogurt, milk etc so I kept pushing the temperature button up and down and playing around with it…

[@geappliances]

Hello there, we're very sorry to know that you've had to experience this situation with your refrigerator. We know this is not ideal, and we want to help. Please send us a private message via Twitter or Facebook with your full model and serial numbers, alongside a copy of your comment here so we can learn more about this situation. We look forward to hearing from you. Take care. - PM

[@jannatulfardous7864]

Our refrigerator work but doesn’t make any ice and cool

[@boshboshish]

I have a flashing zeros on the display and keep unplugging and plugging I keep pressing on colder and warmer and nothing come on ....

[@geappliances]

Hi Boshbosh. We are glad to help. We recommend shutting off the circuit breaker or fuse to the fridge or unplugging it for a minute or two in an effort to reset the controls. After a minute or two, restore power and see if the controls reset and operate correctly. If not, service may be needed. If needed, you can schedule an appointment online at: www.geappliances.com/ge/service-and-support/service.htm or call 1-800-432-2737, Mon-Fri 7 am - 10 pm ET, Sat-Sun 8 am - 6 pm ET. Thanks-RF

[@jamieklein8386]

boshbosh ma

[@isabelleisabelle1675]

Witch is the temperture recomendet to frezzer and fridge ? The temperture área is 8c - 20c

[@danielkelo7080]

how to set a mediline- 125L lab fridge the temp is to high14digree

[@geappliances]

Hi Daniel - I'm sorry but I don't recognize the name Mediline. I'm not aware that we make lab refrigerators so you might check with the manufacturer about this one. Thanks -CC

[@Abulon85]

Our refrigerator temperature has change by itself, my family want to know what could be the problem

[@geappliances]

Hello, Abel. Please take a look at our following link which includes an explanation for what you may be experiencing: www.geappliances.com/search/google/infobase/10009231.htm Be sure and let us know if further assistance is needed!

[@jocelingonzalez173]

necesito ayuda para programar mi refrigerador en español por favor

[@charonhall1392]

Jocelin Gonzalez

[@charonhall1392]

Jocelin Gonzalez

[@gilbertogonzalez3446]

Jocelin Go

[@pedroalejandrososamoreno1142]

Por favor en español