Vinyl Wrapping a Motorcycle for Beginners | Part 1 of 2

[@joshhill4903]

2:19 - hanging fairing and cutting 3:23 - double checking clean and starting the wrap 4:15 - anchoring the vinyl and beginning the stretch 4:45 - how to be a great father 7:20- running the heat gun, bubbles and how to cope 8:25 - how to properly seal your corners 11:18 - removing excess material 13:55- relief cuts to help with tricky bends

[@chadsimmons6347]

Lets see his bike now, i bet he either dumped it on some kid or hiding in the backyard under a ratty old tarp

[@sigmaproverbs2018]

⁠@@chadsimmons6347what? the wrap looks pretty good

[@bramoldenziel6373]

Currently wrapping my motorcycle (gsxr 😅) with the tips and tricks from your wrap videos. It really helped, thanks!!

[@robpilgrim4481]

Man I want to say thank you for taking the time to post this how-to vid and sharing your talent. I would never have tried this without your guidance and my first job, a Ski-doo Gen4 Expedition SWT snowmobile, turned out amazingly well. I will do more and develop my skills as time goes on.

[@quienmas5746]

Finally someone goes right to the point thanks a lot

[@adobomoto]

Good luck man! Hope it helps you out!!

[@quienmas5746]

@@adobomoto it really did cuz my problem was the edges and the stability to put it so leaving the fairings on the bike 1st makes a lot of sense now😂😂

[@adobomoto]

quien mas awesome man! There’s other ways to stabilize the fairings when you have them off. Just didn’t show it because i feel like this video took forever to film. I think i’ll do that for the panigale. Show how to wrap the fairings off the bike and show how i mount the fairings onto some diy pvc or the bottom of an end table to keep em stable.

[@quienmas5746]

@@adobomoto thanks a lot man

[@quienmas5746]

😂FACTS

[@rpmiracle]

I think it would be great if you could do a video on how to wrap a Hayabusa. I'll provide the Hayabusa. :)

[@donaldoehl7690]

LOL

[@MrTheDays1]

🤣😂💯

[@Straightbangin1979]

How could you wrap something as beautiful as a hayabusa? The way they come is stunning

[@MuscleM5]

Can I use it in my crash test video?

[@TricolorJester1]

Ya and I'll provide the ninja ex250 for that demonstration too lol

[@arthurayers5044]

you are a shining example of what youtuber's should be like.

[@Neuronpath]

Besides the excessive adds. Way to many

[@robtaylor8935]

In process of wrapping panels on my 2016 zx6r. First timer*. And watching your video has given a lot of insight on how to tackle the wrap! So far 4/7 pieces done.

[@adobomoto]

Rob Lee fucking sauce!! That’s badass man! You got an instagram? Send me pics or tag me when you’re done!

[@kesman9381]

How much wrap did you youse on your bike?

[@Ggggggggggggg2342]

Thanks for showing the whole timeslapse it really gives an idea the way you work the creases out👍🏻

[@joshhill4903]

15:40 - double check work and what youre looking for 17:10 - tips for any DIY work 18:15 - using vinyl to cover imperfections in the material (can sand smoother and clean if its deeply grooved) 18:54 - tips when using cutting tape 20:35 - anchoring and stretching for smaller pieces 22:00 heating and pushing bubbles on smaller pieces

[@HowardNChauncey]

Best thing about this video is seeing your kid join you for a few ✊🏾✊🏾✊🏾✊🏾✊🏾✊🏾

[@hereb4theend]

If you play it in reverse its like an Asian kid got a bike for Christmas 🎄😂

[@adobomoto]

Ivan Bryan lmfao! Best comment ever on this channel 😂😂

[@mcsinnin6473]

That's a good joke bro! Hahahah

[@flar7684]

lmao

[@moriomislam8125]

🤣

[@PSviewpoint]

That’s funny as hell!! Love it!!

[@Uufda651]

I know nothing about motorcycles, but I'm going to use this info to update my old hard-sided suitcase! :) Thank you for posting! :)

[@Leroyjenkinsjnr]

I had a practice run on my 850gs tank cover yesterday. First time wrapper. It was a bit of a nightmare. Knocked my confidence and made me think I wouldn't try it again. Your video has given me some good tips. I might even try again!

[@adamw1331]

This is EXACTLY what I wanted to see. A STEP BY STEP..... VERY LONG and slow prossess... So that i, with Zero experience with vynal, can get the basics and feel like I could do this myself. Thanks!

[@DetroitNinja]

Thanks for this. Im gonna wrap my bike for the first time.

[@novaoddities3878]

I vinyl wrapped my moded over the past few days. Your video was extremely helpful man. Thank you.

[@Sniper_Cat_71]

This was an outstanding video, loved watching the process. I'm going to wrap my Yamaha Bolt.

[@Thevoicebehindthehelmet]

You hit some really good points here. It was actually extremely satisfying to watch. . . The entire thing

[@ashleybeeten6937]

This was so informative and helpful! You're awesome at explaining the steps in detail! Love it!

[@jellybean4659]

Awesome video! Gonna try wrapping my bike in pink, so excited for how it’s gonna turn out

[@jennaanderson6106]

Best vinal wrap video I've seen my dude thankyou

[@giovannam925]

Wow! I am working on a fairing as well. And have a few recess areas. This is awesome!

[@mrsgiroux5185]

These are great detailed instructions - and if that's Snow tha Product on your wall, NICE.

[@adobomoto]

Mrs Giroux haha yeah! She’s cool. Met her when she came to seattle. Posted the video 😂

[@42StevoStyle]

great job on your details of explaining things.. I am down here in Portland , oregon About to try to wrap my R1, I appreciate you video and hope all is well during this covid BS.. Rige safe ..Thanks Stevo

[@unspecifiedagent]

In pdx as well. Doing my full fairing sv650s. Hope your r1 project turns out (or turned out) well!

[@katiejensen4769]

I’m just watching this for the first time and I’m also from Portland, OR. Thinking about wrapping my Piaggio Fly 150 Scooter.

[@rhinoprez3306]

Just seeing your video for the first time and ya gave me the confidence to doing more wrapping

[@master6676]

Tbank you for show more process details. Awesome video brother.

[@5.56Chronicles]

Great video. Getting ready to wrap my Triumph Daytona in black multicam. I’ll be taking the panels off and doing them. Thanks for all info.

[@mikeemmons1079]

This will come in handy, it seems kinda fun from over here. I am just doing some parts from an ebike. SO I am extra glad you dont have a pokedex of tools to sell me.

[@spicychorizo2725]

Wow, glad I found this. this helped me out alot, I understood every thing. Definitely hitting the subscribe and following you forsure!

[@bobbychills37]

Thank you for this video! Really good, about to wrap my cbr for the first time and this really helps.

[@donarcher768]

I am going to attempt vinyl covering my side panels. Thank you for an excellent teaching video.

[@johnmartinez5186]

Loved the detail and tips along the way. Made it easy for me on my first time. Thank you

[@BreakingBarriers2DIY]

You are so very good at covering important parts and still allowing us to see the whole process with clever fast forwarding. Thanks for sharing this. I was smacking my palm to forehead when hearing your words of "without applying heat...". That is one major mistake i made. Luckily only a Halloween costume. :) "The corner work"...so important too. I'm so grateful you share this knowledge.

[@psyzim182]

Good job brother. Very clear and tidy. Wish there was more "how to" videos like yours. Cheers

[@paulabbot6134]

Cheers from Newcastle Australia. Thanks for the videos. (Parts 1&2). Very informative. I’m thinking of wrapping my MT07. My mate has the exact same bike and I need to change mine up a bit 😅. I’m also thinking of doing my helmet as well. Wish me luck..

[@lesliewhitte1041]

thank you fella 30 yrs spraying having to ad flexible additives and sill getting bubbles cant wait 2 have ago on my 30 yr old xt tenere thanx again

[@adobomoto]

You’ll do great! Just be patient

[@Potatisco]

thanks allot, will be buying a new bike soon and planning to wrap it. This really helped!

[@adobomoto]

Glad to hear!

[@justingarlits]

same i about to by a ninja 400 and ive already designed it and want to diy wrap it

[@davidlee5931]

Really good work bud!

[@laithach6440]

Yo! We had an accounting class together a while back. Thanks for this vinyl vid. Gonna help a lot! Planning on wrapping my sidecar this summer

[@adobomoto]

Lai Thach hell yeah man!

[@jasonsanderson9385]

@@adobomoto Yo Brotha great Video!!! I used to wrap at a shop and mostly cars (when people wanted Fast & Furious style graphics) *Question.... Why don't you use a light soap and water spray to help slide vinal around! I'm going to try your way because it's been a while since I've vinyl wrapped a vehicle. Wrapping my wife's R3. Thanks for video!!! This is the first video I watched I've definitely going to check out your others

[@GhostSuccessKingdom]

Loved your video, saw your Washington plate on the bike, double like haha. Great tips!!! Hope all is well!

[@jcool460]

This video is great, very in depth. I would have them confidence to try this on my bike now. Now I just have to go out and buy an R1 so that is exactly the same lol

[@elijahlouisebabao3953]

Thxs my fellow adobo for the tutorial for us...it's quite a longtym but it's ferpect..Godbless MABUHAY ka.

[@halohalohikers3571]

Thank you for this vid! I plan to wrap a few accent pieces on my motorcycle this was helpful AF.

[@FourThreeSeven]

Thanks! Wrapping my new R1 in the fall. This is probably the best wrapping video ive seen. And its on the same fairings ill be wrapping. Saving this shit for later.

[@adobomoto]

thanks for the love, sub, and support fam! if you get stuck or need some pointers feel free to dm me on ig!

[@rickshabin]

Good video. You make it look easy but I don't think it will be so easy for me when I try.

[@swimwithcoachraven1532]

That is very neatly done

[@cindythu5107]

Appreciate the vid. I’m thinking about wrapping my bike and this was very helpful. How much wrap/size did you end up using for the full bike?

[@insydneytls]

9.30 excellent corner detail... especially about not overstretching when hot

[@JoshuaRichNYC]

Great video! Thumbs up. Not seeing the bike fully wrapped at the end was a bit devastating!

[@adobomoto]

kzbin.info/www/bejne/mnnOm5mhiMZ0n9E

[@adobomoto]

It’s right here

[@thechaostrials1964]

Amazing! Thanks for sharing your talent.

[@christopherpio67]

Thanks for the awesome vids. Great job. I kept going back and forth between wrap and dip leaning towards dip because it seems easier. Gonna do wrap now.

[@Stylez80Nine]

Hey I just did my first vinyl it came out good just some corners got messed up but overall I’m happy with that finish for. First timer will deff do it again when I get tired of this color

[@scrappy_D]

Thanks for the vid bud. Cane in handy, trying to get mine done.. Just some maintanace after ans she'll be ready for some 2 wheel fun.. Stay safe out there

[@jimcummings1537]

Up here in Canada and a Newby at Vinyl Wrap. looking at doing My Can-Am Ryker Sport this Winter thanks to Your Videos. They are ALL plastic textured panels. Any special tips for doing this plastic. AWESOME Videos Bro.

[@Mr.Freshcoast]

19:00 Solid point! Thanks for pointing it out! 👍

[@hiramgarcia5103]

Thanks for putting a video like this out there. Looking to V.W. some parts on my 06 GSXR600 & my 15 Q50 Sport. This definitely helps a ton.

[@adobomoto]

Hiram Garcia no problem man! You’ll do great!

[@hiramgarcia5103]

@@adobomoto keep throwing vids out there. You def got my attention.

[@adobomoto]

Thanks dude! Hmu if you get stuck on something!

[@hiramgarcia5103]

@@adobomoto will do

[@Michael-jq5pf]

@@hiramgarcia5103Im doing a k7 600 GSX-R right now, you should do itttt

[@MoTARDcrew]

I've been watching your yt shorts for awhile now and recently looked into wrapping my bike and stumbled across this vid. Awesome tutorial vid bro. #nogixersallowed

[@HowardNChauncey]

Good job!

[@kevinmynatt4525]

Love me some Yamaha!!! Great job homie!!!

[@dgreatst]

Great detailed vids!! I was wondering how much wrap for your average bike? I'm inspired to wrap my yamaha yzf 600r and don't want to buy too much or too little, Thanks

[@adobomoto]

Buy too much. You can never have enough. 5x30ft

[@vintagemxer9165]

I'm planning on doing my ebike. This helped.

[@Purowalangkwenta]

Nice one pare! Love the vid!

[@adobomoto]

Chris Ongoing salamat!

[@monzav8]

Thanks man. Great video.

[@remotexpolde]

Dude, Thank you for this. This is all awesome stuff. * One thing about the Backing..( at least what I do as I do this on my own..), I keep all the backing and when needed, tape it down to a table. This way I can set whatever I'm working on down and not have it pick up all the junk-dust, etc.. and also not have it stick to anything. Just make damn-sure you have the proper side up! Lol.. ( Learned that the irritating way). It's not necessary, but it sure helps if you're in the middle of something and you have to shoo a moose off of the UFO you're building. ...erm, i mean.. car. . . (fail).

[@tdavid4790]

You made a 1 hour 18 minutes video back then but making short 5-10 minutes videos now. Came a long way man.

[@wildbrasil8037]

Subscribed! That was so useful bro thank you so much

[@fredjohnson688]

Great job sir

[@anthonygeorge1377]

Hi, I have a 2005 zx6r , I am trying my first wrap.. I was wondering what the method was to wrap the recessed bolt holes in the upper mid panels? It's the only thing putting me off as I don't really know how to tackle them. Also any suggestions on doing front mudguard, would you recommend doing in one piece?? Or cutting? Thanks and subscribed..

[@gauthamjj5477]

You gained one subscriber bro. Good Job with the tutorials 🧨

[@adobomoto]

Thanks so much! Welcome to the family!

[@Elpipiton]

First video I see from your channel, I recommend doing a video on HOW to buy the vinyl. Use your imagination, thanks for the tips!

[@adobomoto]

Victor Deathridaz metrorestyling.com use my code metrovip5

[@DripdropBrewing]

Can you let me know the exact color you used in video please I want that color so I can buy of the site you provided thanks. Awsome video and perfect for me to wrap.

[@gregriley1708]

Very thorough and insightful. Thank you sir 👍

[@adobomoto]

Thank you! Check out the panigale vinyl wrap series i just finished!

[@Eltigreerestu]

i got a proyect that i am consider to warp...do you think the vinyl wrap stick well on top of painted fluted plastic,...it is call correx...

[@adobomoto]

Ignacio Niemeyer yeah. Just stretch it well

[@anders.svensson]

Great tutorial :) Cred!

[@gabrielriobo3226]

Excellent video!!! Any other description for the type of vinyl? Or is just the brand and every colour has the same properties?? Thank you bro!

[@steamschaefer4813]

Bro...u just made a subcriber...thankyou.

[@punchawhale]

I thought this would be a quick weekend project 😂

[@KoolKid750]

I know same

[@DylanGSXR]

What is the ideal temperature for the heat gun , mine is so hot .👍 Great video by the way gives me so much confidence .

[@adobomoto]

Just depends on the thickness of vinyl you’re using. Mine goes to about 400 degrees or so but it’s just also how you use the gun. If u need instant heat, then just keep it high

[@clearlight1242]

@@adobomoto so 2 questions: 1) I'm gonna wrap only that lower right side fairing, like at 31:17, how much vinyl wrap will i need 2) and also, there's a deep scratch on the fairing, will vinyl stick to deep scratches? will it still show any scratches? and should i remove any decals that are on the fairings? i plan to use 3m 1080 gloss black vinyl and white for the other side. thanks!

[@scottchaps]

awesome mate thanks it really helped

[@jb.8629]

Ur videos helped so much!!! Salamat po

[@journey4content395]

Just moved to Washington and loved seeing from your plate 😂 lookin forward to running into you riding😂🤘🏼

[@adobomoto]

Thanks man! Im in tacoma. What area did you move to?

[@journey4content395]

That’s rad! I’m in auburn/federal way!

[@jeannawaters22]

I'm in Olympia! Looking to vinyl wrap my helmet and ran across this video.

[@adobomoto]

Je'Anna Van Kempen awesome! What do you ride?

[@jeannawaters22]

@@adobomoto A Honda Grom 😊

[@thelife7504]

I love that hat bro 9ers baby

[@adobomoto]

TheLife you’re gonna love the ducati colors when i reveal the vinyl wrap then!

[@thelife7504]

I’m on part 2 of the r1m video great video bro I have a 2014 Gsxr 1000 and I’m just tryng to learn before I try it. Keep me coming !!!

[@bryanbrooks1460]

Ty. Nice work

[@MasterChief-nx9oc]

Good job Dude, very detailed and informative. 👍

[@MB-ug8gq]

im considering wrapping my r1 too and was wondering if 4m vinyl is enough

[@gr4ntbikes570]

Great video man thank you

[@norcal8718]

Loving the Niner hat bro 👍🏻 I'm looking to have my Harley wrapped, if you're in the Bay Area I'd like to hire you.

[@adobomoto]

NorCal thanks fam. Actually from reno. But im a 9ers fan since montana.

[@norcal8718]

@@adobomoto Right on 👍🏻 Montana is the best that ever walked on a field!! But hey listen I just bought a house at Lake Tahoe do you think there's any way we can hook up and wrap my Harley? I'm trying to get it done before Hot August Nights. Text me 650-921-3489 I got cash brotha.

[@adobomoto]

Right on man. Maybe when i come home to visit this summer. I left reno not long ago for the army. But i visit often and a lot of my family and friends are still there. If you see orange and silver vests rolling around, don’t be afraid to say what’s up to those guys. Good group of people. Tell em you watch my videos. Shogun MC Nevada

[@jinsalazar8854]

Tnx its very nice

[@ShootingSportz]

Question. How much wrap should you order if you want to do a motorcycle fairing and possibly fenders?

[@sam19lit]

Ok, this is for beginners. Where’s the video for “Wrap Dummies”? That’s more my speed 😢

[@skay3264]

Great video! Thank you! 🙌🏻👍🏻

[@terririll5999]

What color is the light blue you used for your bike? I believe you said Avery but I don’t see a light blue version. Thanks for your help

[@agctv138]

Nice bro 😎👍🏼

[@Brian_0rtega]

Hi! I have tried to do this on my bike and i got a bubbly problem. The thing is that it is not like big bubbles. They are like hundrers of mini bubbles. I think it's a vinil problem. I am currently using soapy water and it works just fine. Any recommendations on what specifications should the material have? Im from Argentina btw so I don't have the same brands as in your country ( i think usa lol) Greay video

[@MicMurphy1981]

I subscribed brutha thank you for you insight on wrapping the bike. GOD Bless safe riding

[@coolmjr]

Have you wrapped a helmet? Do you have a video on that? Great video, thanks.

[@jaywallace9800]

Thanks for you knowledge. I have been thinking about wrapping my triumph daytona. Could I put decals on top of the wrap? Also, I noticed your son/nephew took his shoes off before going inside. That's parenting done right lol I don't let nobody wear their shoes in my house.

[@adobomoto]

Jay Wallace absolutely..you can wrap on top of the wrap haha. And yes that’s my son. We step on all kinds of crap outside..doesn’t make sense to bring it inside!

[@theinfinitryda]

I wanted to vinyl wrap mine but went with custom paint instead. Wrapping is difficult I did my dash in my mustang. It’s on my channel, well the mustang is but not me doing the process. Lol. Was too hard.

[@adobomoto]

The Infinit Ryda dude dont give up! Try again. Cars are easy af!!

[@calvinwong365]

@@adobomoto damn you making want to do this lol I got the 3M clear bra material. I covered my piano black transmission area in my new 2018 Mazda 3 Sport. I still need to do the area with power windows. But that area so hard. I'm so scared cutting the fabric.

[@modularperformanceracing1799]

Nice video! Whats the name of that color?

[@thecasualrider2668]

thanks man subbed.