Advanced technique of the yamaha mx61 custom voice performance and assign 1, assign 2 knob

This tutorial will show you how to custom your voice with assign 1 & 2 knobs. Also, show you how to save your own user voice and user performance.
If you like my videos, you can buy me a coffee, thanks.
donate.stripe.com/9AQ5kS5KVgH...

[@JasonAchilles]

Hey man I just want to thank you for all these videos you posted to get a handle on the finer points of this instrument. It's a great machine but they don't explain this stuff clearly -- without your tutorials I'd be quite lost on the inner complexities, particularly those detailed by videos *exactly* like this one. Much appreciated!!!

[@mdmusiz]

Thank you for your feedback. More videos are coming soon. 🤘

[@mgd9151]

Excellent video and a great help, sir. Thank you for taking the time to make this video.

[@_juliandean]

THANK YOU MD!

[@yoha1998]

This is great tip Sir, Thanks

[@TikTalk]

Hi @MD Musiz! I have question for you. I recently purchased an MX49 v2 and noticed this evening (when it was fairly quiet) that there was a strange, not very loud buzzing sound coming from the left side of the synth. Nothing bad happens in the headphones, there are no distortions, synth plays without any problems. However, after taking a closer look at the sound, I noticed that it was coming from near the "Daw Remote" button. Interestingly, after turning on this function, the buzzing stops 😳 Appears again when "Daw Remote" is disabled. This sound is not very loud, but you can hear it by putting your ear to the device 🦻Does your synthesizer behave the same?

[@mdmusiz]

Thanks for asking! No, I don’t have that issue. Try to plug to diffrent power outlet if it is still?

[@yonez81110]

thank you very much ! you're a good teatcher! I'm struggling to create beautiful and effective apregiators. they stay basic. Do you know how to have something cool with for example "PAD CHOIR number 11 or 52 ?

[@mdmusiz]

You can do it with the assign 1, just change different Dest = ELFO-FM (Frequency Mudulator), Depth = +20

[@yonez81110]

@@mdmusiz thanks i'll try!

[@jocolon01]

Hi I m from Puerto Rico and I have a Yamaha MX61 ver 2 Blue its amazing the sounds,but I have in the church a Yamaha MODX7 and the pad#2 sound great too.I would like to program or teach us how to adjust the pad#2 on the MX series? Thansk for your videos!!!

[@mdmusiz]

Thanks for your comments. You can follow this video for adjusting the pad sound (use the MW instead expression pedal) kzbin.info/www/bejne/mqKwdXeZpM2Zhas

[@WilliamDeCleveland]

A que te refieres con “ajustar” el pad #2? No se si yo pueda ayudarte!

[@rickhuitt5939]

Do you happen to know if it's possible to change a voice's volume or panning for a "specific key". For example: how can I change the pan setting or individual volume of the hi-hat keys in Standard Drums 1 or etc... Thanks so much for considering this. I'm stumped...

[@mdmusiz]

Great question. Yes, you can create your own drumkit with custom settings (panning, volume, effect sends…) each keys. You need John Melas app

[@rickhuitt5939]

@@mdmusiz wow! thank you so much for getting back to me. Where do I get the app?

[@WilliamDeCleveland]

I know this question is a hard topic. But I recently bought an amplifier for practice at home. It’s a Donner DKA-20 Keyboard Amplifier 20 Watt… I’m having a hard time to set the low mid and high since I don’t have much experience. Should I keep the low mid and high close to the -12 or over a pass the 0?

[@mdmusiz]

I checked the website for more info about the dka-20, it doesn’t say what low mid high freq is. By default 0 is neutral. With small amp I wouldn’t recommend to boost low, keep the mid +6, the sound will be more presence

[@WilliamDeCleveland]

@@mdmusiz awesome man thanks for the fast response!!! So low and high on 0 and mid +6! Thanks a lot!

[@jeremymoore2835]

thanks for the videos. I have a question. How do you choose a custom voice that you already saved? I don't see any way to get to U001-U128 and select a saved voice. thank you

[@mdmusiz]

When you save your custom user voice, you save it with its category. Scroll dial value till end of list preset then you will see the user voices of that category.

[@jeremymoore2835]

Awesome thanks

[@SamadhanGuldagde]

I'm not getting the store voice option in my MX What is the reason? only performance showing why?

[@mdmusiz]

Check my other comments. Probably you didn’t follow the video instructions.

[@yonez81110]

Hello. I have an over question for you. When you play with layer, you play with parts 1 and 2. I know you Can have 16 part in your performance. My question is : Can you keep the layer if you change part ? For example part 1 and 2 (layer )and change it, in part 3 with part 4 (layer). I think we can't but...

[@mdmusiz]

there are some trick to do it. Check my Hans Zimmer The Pacific patch, that's how you switch patch from upper to lower.

[@yonez81110]

@@mdmusiz i found your video but i don't know what i have to do 🤣🤣🤣🤣

[@mdmusiz]

@@yonez81110 More advanced layering patch videos are coming, stay tuned

[@yonez81110]

@@mdmusiz i don't know what is a patch... Sounds to install ? How to register a patch?

[@diujay]

Can i change sound without cut ?

[@mdmusiz]

Yes, then check this tutorial. kzbin.info/www/bejne/lZS3aYyGeLSIors

[@diujay]

@@mdmusiz thanks

[@joshuawelsh4656]

me next?

[@mdmusiz]

Yes, I don't forget you ;-) . Vycro MX app for windows will be next

[@joshuawelsh4656]

Thanks