Honeywell ST6400C Timeswitch user instructions by AdvantageSW

[@shynishm]

Moved into a new area and was clueless on how set the Timeswitch. This video saved my life! Thank you very much for this simple and excellent video.

[@essemsween818]

Thank you so much for this video. I wasn't given a manual OR a demonstration of this unit, I just discovered that it was wrongly wired in too which is why I've never been able to run just hot water with no heating unless I used the immersion heater! My programmer was placed on the wall at the side of the hot water tank so it's unfortunately not only pretty dark but it's hard to see the display and almost impossible to read the writing at the side of the switches. This is a very clear, understandable guide to what the switches are, how to use them and how to skip the 3rd time period during the day and just have morning & evening heating. Honeywell no longer even carry the print version of this programmer so your guide is brilliant for anyone who inherited this unit with their new home. Thanks again.

[@melb6528]

Just replaced an older Honeywell with this type, thank you for publishing this great video, solved my problems.

[@laurentm8681]

Hi, any idea how to set up the temperature?

[@melb6528]

@@laurentm8681 use room thermostat and hot water thermostat. The programmer | timer does not control temperature.

[@roydenpereira5726]

After setting times for both hot water and heating, what should the horizontal and vertical sliders be set on ? Many people in the comments have the same question. Please advise

[@craigmarchant5262]

The hot water side of my timer (honeywell ST6400C) is working fine. But the signal for hot water is not. The red light is coming on but the boiler and pump are not kicking in. Any ideas would be appreciated !

[@jamwithtupac]

With this thermostat if I'm correct as have the same one, you cannot get this to switch on automatically if it dips below a set temperature?

[@Little3888]

Since this has unique bars for hot water and heating, is it actualy better than the newer 9400c as you can quickly switch off the heating or water individually with the 6400c?

[@81coolbuddy]

Thank you very much, I moved into a property that is equipped with this device . Had no idea how to operate it. Looks like a pretty old model.

[@laurentm8681]

Hi there, how do you set the temperature? Because the heating is ON on "cont", but it still doesn't work at all and obviously I would like to set up the temperature. I can't find any instructions for that at all.

[@Slowloris66]

Moved into a new house and has this older device. So helpful! Thank you!

[@bethbee8598]

hi,thanbks 4 your upload.do i nid to run it for hrs before it heats up the room

[@karlbaker9153]

Programmed hot water exactly as video showed. Set it to go off at 11:50am everyday. I came back home at 12:30pm after going out somewhere and it was still on :/ Any ideas?

[@funkr77]

Thanks. couldn’t work this out and at least we now have heating until we can sort it out long term.

[@MH-bf4uu]

how did you fix it temporarily? I'm also having issues!

[@funkr77]

@@MH-bf4uu We put it on the auto setting so we could get heat as my boiler just wasn't staying alight. This worked fora few weeks but we ended up having to buy a new boiler although we do still have this thermostat. Good luck

[@ajilful]

Hi, in the auto mode can we set only 3 timers?

[@asimrafi2769]

Brilliant video straight to the point 👍🏼👍🏼👍🏼👍🏼 couldn’t ever get this to work thanks to your video it’s all set now

[@irajtoysfun]

Which mode should i use for energy saving? Auto or continuous?i have the st6100c model.thanks

[@luismelville2781]

Excellent video. Even a simpleton like me did it first time...👍🏼

[@poochie539]

Once you have set the times and put the switch on run programme, where should the hot water and heating switches be placed on? Thats what im having trouble with

[@karans5585]

I think they need to be on auto if understood correctly, still trying to figure out too

[@roydenpereira5726]

Same question

[@roydenpereira5726]

Found it on the manual. The slider must be set to AUTO for it to operate according to the heating/hot water programme.

[@nigelhanwell8633]

Great video guys. Daughter just moved house and it has one of these. Now we can program it!

[@stephen8577]

This video saved my day, thank you.

[@robertcraighutchison6466]

Thanks great help,been baffling up to watching your vid

[@cybortek1]

Thank you for this video, I lost the manual and following your instructions I set the timer for the hot water and heating.

[@jayendrashah4339]

Hi when I try to programme it, all the days of the week are highlighted instead of one day at a time Any solution to it

[@sheilashaw8400]

When I put the water on the heating is coming on as well on all radiators except 2. The light is on at the water and faintly lit on heating.

[@Annie-mz9ve]

You saved me, thank you!🙏

[@andrewroberts8139]

I tried heating on continuous and the light is on suggesting it's on but none of the radiators seem to be hot

[@martinyip5821]

thank you for your video, it helps me a lot

[@nazmer2835]

Very good instructions

[@emotoby18]

Great video nice clear instructions 👌

[@cadinhosouza]

Thanks for posting this, mate!

[@SuperHoops]

Thank you so much, really appreciate the video!

[@JakkiCarey]

Thank you so much for this video. Very helpful indeed.

[@chayanikasarkar7724]

Saved me… thank you ☺️

[@jaumebarfull3759]

Thanks! Very usefull video.

[@nazmer2835]

Very good instruction.Thanks

[@gavingavin4572]

So after setting the on and off settings. Do I leave the slider at once or auto?

[@roydenpereira5726]

I thought I was the only one with this question

[@gavingavin4572]

@roydenpereira5726 Auto if you want it on continuesly

[@Lew747]

Excellent. Thanks a lot!

[@Kashif8571]

Really useful. Thanks mate!

[@lenatye2129]

Thank you so much!! 😊

[@benic9341]

Please help! On mine, the red light next to heating is flashing when I move the slider to auto, once or continuous and the heating is not turning on. Can you please advise? Thank you!

[@alekslife3866]

Beni did you manage to fix it? I have this same problem now, what do I do?

[@benic9341]

@@alekslife3866, hi, we had it replaced. I suggest calling a professional to replace it as it is most likely broken.

[@borntodoit8744]

@@benic9341 you dont need to call a professional Easy to install timer box over timer backplate - 2 minor screws - push down and lift up to remove box from backplate. Save yourself money (its all of 10secs work - i wasnt happy when electrican did that and charged me £75) www.free-instruction-manuals.com/pdf/p4734599.pdf

[@roydenpereira5726]

Found it on the manual. The slider must be set to AUTO for it to operate according to the heating/hot water programme.

[@sebgrabowski]

Thank you for video

[@dyjo9766]

Thanks 🙏

[@wateva26521]

I have an issue where the heating turns on even if it is set to off when the hot water is on. Please does anyone have any advise on how to fix this?

[@sid8760]

Very helpful

[@connor95]

thanks

[@johnsmalling]

Cheers!

[@jaumebarfull3759]

Thanks! Very usefull video.