Adventure 5m. My first impressions.

I have had this printer for about a week now and have been using it as often as I can. in this video, I go over a couple cons I have found with the machine and some pros.
I got this machine because 3d print sos shared a link saying it was on sale. if you don't already know who that is, then go check him out.
/ @3dprintsos
my etsy shop
www.etsy.com/s...

[@timothyjones7907]

My friend! You should charge more for your controller stand haha. You are ripping yourself off, that is a great design.

[@user-yg8ti5zv5d]

I use Orcaslicer 2.0 with the 5M Prints fine over wifi, I use stock profiles and it prints fast Adhesion can be a problem but I printed the enclosure and ordered the kit I found if I enclose I have no problems with adhesion I used a towel I'm printing right on the edge of the build volume

[@jeffm2787]

Good machine to build off of. Project machine. Klipper is what I would do. Get rid of anything proprietary. Good metal frame, etc. I have a creator pro from 2016, 300mm/s 4400 acceleration. Of course nothing but the frame and bed are original. Prints ABS like a champ. Ohh and I added a heater for the chamber.

[@flashforge3d]

Thank you for your support of Flashforge.

[@anthonylong5870]

Dude your runout sensor works, you have to turn in it with the screen....

[@Draxis3d]

Really? Seems a little silly to me, but I will look into that. Thank you!

[@user-yg8ti5zv5d]

My filament run out sensor doesn't work either But I still love the printer It is annoying and I did indeed do what you did with filament swap

[@anthonylong5870]

You have to tuen it on with the screen

[@user-yg8ti5zv5d]

@@anthonylong5870 I found that out later I removed it for now I keep meaning to add it back on The enclosure I recommend highly but if you print one and get the kit Print it from Pet-G not PLA

[@tolkner8852]

hi i want to get into 3d printing and I don't live in the us so I can get this for about 641 dollars including shipping and tax or I can get the flashforge 5m (not pro) for 530 dollars in my country but I don't know which one I should get because the tx is closed and has a filter and the m5 isn't closed without a filter and I intend to put it in my room and I don't want the plastic particles in my room but I don't know how bud it really is so what would you recommend ? or maybe other printer maybe

[@Draxis3d]

Sorry for the late response. I would recommend any bambu labs printer over the flashforge at this point. Of the flashforge is cheaper and your are on a strick budget then look into the inclosed 5m. I think the bambu printers are much better, but the 5m printer isn't total trash and is cheaper

[@quarantainment293]

Have the AliExpress link?

[@Draxis3d]

www.aliexpress.us/item/3256806669493424.html?ug_edm_item_id=3256806669493424&pdp_npi=4%40dis%21USD%21%24447.00%21%24268.20%21%21%21%21%21%402140eaef17217546339024141ddd5e%2112000038526880239%21edm%21%21%21&edm_click_module=item_detail&tracelog=rowan&rowan_id1=aeug_edm_56672_1_en_US_2024-07-23&rowan_msg_id=8277biz_search_product%3A0%3A0_575841760%24e51f58fdc2c347cf80eea28c0d96c088&ck=in_edm_other&gatewayAdapt=glo2usa

[@Draxis3d]

Not sure if this will work or if it will still be $270 by the time you see this but I have gotten this link a few times in my email now