DIY Jeep Hardtop & Door Storage

[@ADigsMedia]

Great vid. Can you please post part list

[@bigdaddyg3115]

any chance you can publish the parts list?

[@mikefatheads]

Any exact measurement changes for a 2 door project?

[@shelbysweetmon1875]

Just finished. $73 bucks and about 3 hours (including Home Depot run). Good video. Thanks!

[@jonrogers2467]

Shelby, what were your measurements in the end? His link doesn't appear to be working. Thanks in advance if you have them!

[@TrailRecon]

Great DIY project! I like that it hold not just the roof but freedom tops and doors!

[@adventuredex]

Yeah, you use the 1.5" PVC it is strong enough to hold them all! Thanks for watching!

[@konrad0311]

Great video Dex, might give this a try . Ballin on a budget isn’t always easy but you make it look easy🤘🏼

[@williampyne1123]

Can you send me the complete list of everything that you used for this hardtop storage rack the link wouldn’t load for me

[@aggrex]

Nice job on the DIY PVC piped hardtop/door, t-top stand. I would consider adding some low-profile casters to the PVC piped frame assuming the frame is stiff enough

[@adventuredex]

Thanks for the comment! Yes, I actually looked for some but unfortunately they didn't have the right size. That will probably be an upgrade in the future. Thanks for watching!

[@rustyalej]

Hey do you have a pic of the stand with the roof, freedom top and doors? From the looks it doesn't seem like the doors would fit comfortably without potential scratching. I like your rig bc it technically all inclusive so my wife and I are looking to maybe do it this weekend. Just want to be sure it would in fact fit everything. Thanks! Good video.

[@adventuredex]

Thanks for the comment Alexander! I haven't had a chance to get the doors off yet because of the rain but it will definitely fit. I had a much smaller stand for my door prior to building this one. It is a fun and easy project that you and your wife could do together! Check out the parts list on my website www.adventuredexonline.com Thanks for watching!

[@BearSlaps]

Any chance I could get a part list for this? Website isn’t working for me

[@adventuredex]

Sorry I don’t have it at the moment!

[@danfl777]

How much was all hardware total?

[@ch_444d]

Thanks for the tutorial. Was that Atlantis in Nassau @ 1:16?

[@charlescho]

Looks like it.

[@brettblackburn4595]

Hey Dex hows your bumpers holding up?

[@adventuredex]

Thanks for the comment Brett! I have a new rear bumper with tire carrier video coming out this week! Stay tuned for that! The current bumpers are holding up great but since an upgrading the tires soon, a tire carrier if necessary! Thanks for watching!

[@latyoiaturteltaub7282]

How can I get the list?

[@tammyteel1961]

This helped us quite a bit! Thanks man!

[@yousifhassan2376]

ive been waiting for you to upload something new for a long time!! dont do this to us!!! dont leave us so long without a new video!!

[@adventuredex]

Thanks for the support! I apologize for not uploading as frequent as I should but am back! Thanks for watching!! #jeepwave

[@pssita]

Nice work... The only thing I would do is add wheels to the frame!

[@adventuredex]

Thanks for the comment! I have been saving up long and hard for them! Soon!

[@pssita]

I mean wheels for the hardtop and door storage unit.. They shouldn't be too expensive ;)..

[@adventuredex]

Ohhh yeah! the hardware store that I went to didn't have the right size! I will probably do an update video once there installed! Thanks!

[@fleabottom]

Definitely!

[@TalariaBros]

I do not see the parts list on your website. Can you post it here?

[@adventuredex]

Thanks for the comment Dusty! It will be live on my website tonight! Follow me on IG @adventuredex to stay up to date! Thanks for watching!

[@patricksteele8633]

I can't find the parts list on your website!

[@MADRICAN969]

Great video and awesome idea 💡

[@adventuredex]

Thanks a lot!

[@yusepegarcia5683]

Do you still have the material list ? available , thanks

[@TheBeardedJeeper]

Great video I need to build one of those.

[@adventuredex]

Most definitely! Thanks for watching!

[@35zone35]

Nice video man ! I Am going to try and build this with my dad!

[@adventuredex]

Thanks for the comment Isaias! Good luck with your project! Feel free to check out the parts list on my website www.adventuredexonline.com Thanks for watching!

[@supercharged00gtp]

Great video, nice job man!

[@adventuredex]

Thanks a lot bro! I appreciate the support!

[@KingsDisasterGarage]

Great video love that rack. When you put some wheels in it it will be 100%

[@adventuredex]

Thanks bro! Yeah, am hyped!

[@vtrap1996]

There still isn’t a parts list for this the link doesn’t work and I just searched all the comments for one

[@regmartin688]

Awesome stand.

[@adventuredex]

Thanks!!

[@sawyerkuepker4880]

I think I spent $19 dollars building my personal hard top rig. It sits

[@adventuredex]

Thanks for the comment! $19 isn't a bad deal lol but I wanted something very sturdy and could hold everything! Thanks for watching!

[@ricardosworkshop]

Great video man! Appreciate it!

[@DelanoJ]

Parts list link is dead

[@ragerory]

What happened to the site?

[@adventuredex]

Under construction, sorry!

[@vtrap1996]

For 2 years apparently

[@erikyost5516]

Can you send a blueprint on this - I would like to build this... Thanks!

[@erikyost5516]

Nevermind - I Just saw it!!

[@adventuredex]

Thanks!!

[@melissaguild2358]

Where did you see it?

[@kevingalarza760]

you should get caster wheels and then you can roll it around

[@adventuredex]

Yah I couldnt find any in the hardware store I went to but that is a good idea! Thanks for watching!

[@BiKEnBiTES]

My Jeep needs a boyfriend like you 😆

[@ofsoundmind2687]

What does luck have to do with it? Just takes a little research

[@louman76]

This Is Great, Why don't they sell something like this for jeepers.

[@adventuredex]

Thanks, Someone should!

[@louman76]

AdventureDex you should consider

[@adventuredex]

Haha yah maybe!!

[@briancatalina8679]

Not a bad video but you should have stated everyting you bought. Not that i couldnt figure it out. you should of also said the lenghts of the pvc tube you cut rather than everyone having to measure. In the future maybe be alittle more informative. Nice try with this one.

[@adventuredex]

Thanks for the comment Brain! The entire parts list is on my website www.adventuredexonline.com, I appreciate your advise. I try to improve every video! Thanks for watching!

[@TutoringHut]

Thanks man. Love the video and the concept. The link you provided is broken: adventuredexonline.com/Roof_Stand. There is no parts list. Can you maybe provide on here?

[@adventuredex]

Thanks for the positive feedback! I will work on fixing that link!

[@dawnkent128]

That link goes to a porn site .... 😑

[@hectorvilomar9250]

This is a great idea but definitely not a how to ,the instructions are way off

[@adventuredex]

Feel free to contribute by providing better instructions. Thanks for watching!

[@kirkboon1110]

Hey Dex, love your videos man, but what's up with the shitty music through this one? Damn man, had to skip most of it just to see the ending!!!

[@adventuredex]

Thanks for the feedback! Videos have drastically improved from this one! Thanks for watching!

[@GM-yw4se]

1. all 4 doors are not easy to fit under it 2. I really only got 2 doors under it....that's y he doesn't show all four doors in the case bc he knows that it doesn't fit in good. I'm going to make another one with different dimensions...wish me luck...and do another video with the correct sizing!!

[@adventuredex]

Thanks for the comment however I do use this stand for 4 doors and my hardtop. They fit fine. This video wasn't meant to be the be all end all of stands, feel free to make your own and maybe share it with us! thanks for watching!

[@alainlandriault7481]

Hi Tony - can you send me your parts list? I will provide my email upon your reply.

[@americanpatriot8996]

Why was I unsubscribed from your channel

[@adventuredex]

Thanks for subbing! JeepWave 👋🏼