What will get CRUSHED and what will get SAVED?

[@peteblicharski6550]

you can you can used anything for hammer

[@davidbarnsley8486]

Very busy time for you Silas

[@waynekoszenski9913]

it just amazes me that you're father named the company after you and you turned out to be the hard working man you are for the company keep up the good work

[@erichorsan6993]

I love the different items you put in the crusher. Some washers, dryers, dishwashers and the like would be great also if possible. Always great videos.

[@erichorsan6993]

I would like to see some of the loads being loaded. Maybe a few or a couple. Also I love your bundles you made.

[@MechanicVanPelt]

Glad the Skylarks found a home.

[@michaelschuenemann3505]

Another very Busy Day with Silas in his Yard - always a Pleasure ! Many Cheers from Australia !!!!

[@brentonmcclean3647]

Hey Silas...as always, I truly enjoy your content. No matter what you're getting into, it becomes an adventure for me with each upload. Thanks again for the work you put into these videos. Hopefully your family is doing well too. Take care man...✌️

[@donaldgarrison4313]

Don t crude trucks !! Parts worth more!!

[@Igorjaniec3976]

Great episode like any other! Greetings from Poland ! 😊

[@TwinGripDiff]

Jak się masz cześć z USA

[@fredbrooks6488]

Poland we love you

[@Amen.22]

Is Poland a good country to retire in? I’ve been thinking about retiring to the Philippines but it’s hot most of the time. How is the weather in Poland, the cost of living and safety? Thank you.

[@rogereaston1188]

Dzien dobry. I just got back from a 2 week visit to Poland. Beautiful country. My wife and her family are from there.

[@joeylucero]

Love watching you crush newer vehicles and keeping these classic vehicles

[@danapplegate3743]

I found the old Victor or Harris for cutting that are 4 ft long makes it easier to cut up frame so you don't get burnt when you don't have to bend over as much so your back won't hurt

[@richardcorley364]

Save them

[@dombutler7685]

Thanks Silas, I used to live in an area where people wouldn't want to pay anything for parts, it's so frustrating when you know what something is worth! Nowdays i'm in a better area, but have no space to part out anything! I hope you work it out, all I can think of is storing the good parts and then one day go to a swap meet.

[@markbehr88]

Thanks Silas

[@allanedwards8238]

Great shot inside of crusher

[@ronaldhuff635]

I always liked those skylarks because they werent everyone elses chevelle. And we put 455's in ours too! They were fun

[@JohnShinn6078]

Stayin tuned, thanks Silas! 🤠👍👍👍

[@raytalbot5890]

You should clear a Terry Section in your yard to set aside his things 👍👍🇬🇧🇬🇧

[@bigliftm]

A magnet would have done the trick sorting thecasings. brass gives a good price.

[@SteveHerrick-yi4md]

i always enjoy watching your videos, thanks for all you do!

[@phillipdickinson8557]

Salis that was so good thank you for sharing and your time was really great never miss a video and can't wait for next video great adventure

[@ep5796]

Hey Silas I got to say I just started watching your videos and they are a great entertainment for me. I appreciate the fact that you're a humble man and quite knowledgeable in what you do. I think it's great that you and your dad have this little rivalry as well in a good way such as when you find money in the cars. Which leads me to a point I would like to make when you find coinage in those vehicles even though you're busy as heck you should protect the individual coins somehow. I know you're busy busy and don't have a lot of time but some of those coins are highly sought after by collectors. You don't want to scratch them up, you don't want to clean them in any way except for maybe water soak, and just try and protect him as best you can. I don't know how knowledgeable you are in coins I'm no professional but look at KZbin videos on coins and you'll see that people are looking for the '70s and the '80s and the '90s where they ignored those in the past. Of course there is the 1943 if you ever run into a 1943 and it is copper you may find yourself living in Costa Rica permanently. I don't know exactly what the last one sold for but I think it was between $800,000 and a couple million. I will comment more often as items come up. You take it easy even though you work your butt off you know what I mean, I wish you nothing but luck and good fortune. Thanks for all you do you are appreciated from Oregon

[@yeahright302]

damn you are one busy dude for sure!!!i love all your junk stuff!!

[@marktellez9719]

Love your Video may you have a blessed day

[@shanevader5517]

I appreciate you and your videos, thank you sir.

[@hambone03]

Keep them coming

[@jamesmarshalla8565]

Hello Silas thanks for another positive video to watch! If it was me, save the classics and junk the rest!

[@claytondewey3367]

Good video. You are putting in a lot of hard work. Can't wait to see it when you're done. 👍👍👍👏👏👏

[@automotiveaddiction428]

If i had money and a big trailer ..those old cars and trucks are worth big bucks where i live..its about a 24 hour drive from Canada to your place.

[@charlesstarlin6354]

Awesome always cool stuff always thanks 😎

[@brianlynch3436]

Silas you crack me with the way you pronounce Toyota. Teeota.

[@jeffreypinder9398]

Silas, you def have surgical skills with that loader.

[@crownvicguy98-11]

I would be interested in buying any tail lights headlights or interior lights off of any vehicle before or after crushing.

[@donsab-xz4so]

Could've sold the bed toolbox on the white pickup pretty easily. Wide application, not like a specific vehicle part.

[@AdventuresMadeFromScratch]

Toolboxes like that usually go for $10-20 here. They’re super common on the used market and have little value.

[@MWL4466]

Hey cool. The "Crush Cam".

[@johnm.5848]

The up close view of the cars getting crushed is way cool Silas. Looking at the black Toyota pickup at 12:24, The body is in dang good shape so I'd attempt to sell it as is before sending off to the big junkyard in the sky but that's me. Someone could have a good engine and trans for it.

[@donsab-xz4so]

He has addressed that before. Not worth his time to try to sell parts; yards that tried that have failed.

[@james_hangover9292]

Fantastic, love the dramatic background music, somehow it suits the content. 👍

[@johnkranz4004]

Getting a lot done Silas

[@jonpeters2700]

You can get some good money for the grill in that old Chevy truck, it looks like it is a 73 or 74. I heard that those grills are hard to find and very expensive if you find one. That one looks like its complete and not broke. I need the side window glass for a mid 80's chevy C10.

[@tobyz.3452]

Good job man....

[@rickymcintosh1152]

Silas another good video thank you

[@LABVENTITRE]

I follow you from Italy

[@greggabel7238]

Do 1980's or older vehicles get saved more that 1990's or newer. It is the historical vehicles that I fear of becoming "Extinct"

[@richardcorley364]

They deserve a second life

[@jakjenkins3416]

Hi buddy love your videos keep up the good work best on KZbin ✌️

[@kapekodbob]

Save the steering column in the floor shift car for a hot rodder Maybe save the tranny also check what motor is in it. Def like and appreciate !

[@derekrogers6240]

Why not put a couple of truck beds in front of the crusher, this way all the glass n stuff falls into the beds instead of on the ground.

[@Vet-7174]

Good Vid Silas 🖒

[@AllenWillis-yr8ps]

Hi Silas I talked to you the other day about the 55 Pontiac I told you I wasn't good at this stuff I try to say Mister Good pliers I don't believe that's what it said I get you can't save them all but you try I understand about not having enough space have a good day

[@michiganfarmer8459]

Save that old buick

[@ShadowPitt]

Tapped in from Southern California

[@carlgruver695]

Wow those Toyota pickup.s are going for strong money just seen a video today 7700 dollars for a wrecked 2012 at copart so just saying take it to copart and see how it does I believe it would be worth your time

[@emmittarrowood2609]

Silas I seen what looked like a 6o's model chevy panel truck while you were cutting the 2 Tru ks in half you got any info on the panel truck I think green ? ??

[@randysinger2673]

Really Surprised the Guys who deal in rust free Truck Beds, Doors, Fenders and Tailgates In the North East have never made a trip and bought a load. That Ford and the Toyota Bed in the North East are 12 to 15 bucks each with no rust

[@allenkranawetter9482]

Hopefully the good old stuff got saved

[@dancerjim]

Keep going.

[@charliemansonUK]

And you've just made my evening Silas Hi from the UK 🇬🇧 where your crushing exotic cars 😂

[@raymundogarza9901]

I think those you are cracking are still good I like old cars I rather be riding them Rey from right them Laredo Texas

[@andrewromero4829]

Vice grip garage

[@DRS-TOOLS]

Cool

[@lesliesmith2586]

Anything can be a hammer. No substitute for safety glasses or a shield.

[@joegutierrez2019]

Enjoy all the videos 😅😅

[@timl9cas5696]

The Toyota and ford look new, but swapping drive trains still is a lot of work

[@kimbodywork1405]

I have a question I know you can’t give a the exact price but what is the price of your old cabs from low to highest, just a guesstimate. I see good stuff but live Georgia. Thank you.

[@wllliammsporolingg1615]

I need hubcaps for my 1984 Pontiac Parisienne wagon, help me out.

[@micahrudd5363]

Save!

[@jerrysadventures8952]

[@garagedweller7159]

Hi Silas,just wanted to say I really enjoy your content,and just subscribed. Is it possible to ship a wall hanger front end? Wish I was close but am in PA. Thanks man.

[@kevinravet2876]

🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬🤬

[@raymundogarza9901]

Hook me up with one of those truck tool boxes

[@sunnyjoelandry3971]

With all those Vehicles out there you can't find a seat to fit in that loader, that's more comfortable than the one you have in it?

[@garylangley4502]

Hi Silas! I was wondering what your customers do with the front half of those trucks. Have a great weekend!

[@grabasandwich]

I'm pretty sure they swap them onto a modern truck chassis so you get the old look with modern powertrains.

[@keithjackson1180]

Love watching your videos. You say that people only want to pay super cheap prices for parts. Just out of curiosity, what would you normally ask for something like that white Ford pickup with the bad drivetrain?

[@AdventuresMadeFromScratch]

I don’t sell complete late model vehicles. It brought about $1300-1500 for scrap if I remember right.

[@keithjackson1180]

@@AdventuresMadeFromScratch Thanks for the information. You would have to sell every nut, bolt, wire and piece off of it to beat the scrap price.

[@joebradley7317]

@@AdventuresMadeFromScratch Why won't you sell the ford truck if someone will give you what you want for it. What is the difference between the buicks & the ford & toyoto besides age ???

[@jjMcCartan9686]

​@@AdventuresMadeFromScratchSilas this might seem like a weird request but as a diecast car collecetor I'd really like to see what toy cars & models you have collected over the years especially from the treasure hunt videos & a big Hi from Ireland 🇺🇲☘️🇮🇪

[@jjMcCartan9686]

​@@AdventuresMadeFromScratchI'd like to see a video of you digging a hole with the linkbelt & getting rid of the last of that old house .That demo video is second to the great studebaker crush 😊

[@lesward1]

Do you have any 40s truck cabs with doors front panel and bonnet wings for sale?????

[@nowayhunting]

the old ford truck at the 5:47 mark have a radio?

[@derbygreg9884]

Crush it all free up that space.

[@timl9cas5696]

You should get a KZbinr in to do will it start with the Plymouth limo, that it such a cool one

[@drskull9]

If you flip those truck frames upside down in the crusher, might squeeze down in better

[@danholsapple5003]

Do you have a list of cars you are selling posted somewhere?

[@Darrin_Wyatt]

Where do you advertise your old cars, im always looking for cool stuff. Like a 1964 ford galaxy.

[@ryanknacke988]

I really like your videos they're really good content keep them coming it is really neat to see cars get crushed and it's really neat what you do with the Old Farm trucks have a wonderful day

[@metalartcustomsLLC]

I need a late 2012 ram hemi. Has to be June or later only 2012.

[@davewhittles]

your cars are better than half the junk sold at copart

[@SPR-777]

I would like to see what they do with the vehicle art. I can’t imagine it, is all. Thanks

[@jeremyprather9732]

Silas where are you located?

[@matzrat5006]

Save.

[@rosewhite---]

Toronado!!!!!!!!!!!!!!!!!!!!!!!!!

[@vw4x4]

Silas, There are a ton of parts that are "not worth your time", and you are sending to the land fills. Why not do something like a self service scrap yard. Lots of people would benefit, and less in the land fills. Maybe just on the weekends, and keeping people in a small section of the yard, where cars can be picked over first. Lots of places doing this now of days.

[@williamlloyd3769]

Think you misunderstood, Silas never sends metal waste to landfill. Scrap metal equals money! He is just saying he could try getting more money by selling parts and panels to auto restoration specialists or hobbyists.

[@timmybonds4229]

Silas I know your a busy guy but I'm looking for a cavalier 83-87 square body running or not plz keep your eyes open for me if you get this and my offer still stands I mentioned a while back if you need some help I'd love to come out there for a couple weeks or so help you get caught up I was raised up around cars all my life so it's in my blood thanks for your time

[@gregorygreene6033]

How much for the bicycle?

[@thethriftbandit]

Keep the number plates. 😢

[@streetmachines9679]

How much for the red 69 Buick gs

[@SimonYoung-n7i]

Have you ever come a cross something unpleasant in the vehicle's that you crush

[@1944chevytruck]

good job!

[@amend5269]

One day all the 80's-90's cars will be gone. Don't be left with rust buckets find a source for the old cars if possible.

[@johnnymack8442]

Hey. If it's stronger then your skin and heavier then your fist. It's a hammer!!

[@stuartfletcher2378]

My adventures are nowhere near as good as yours so I look forward to your next video to see what you are up to . Take care stay dry and happy crushing . Stuart in Ontario .

[@robertsmith7580]

If that was all one caliber for the most part, it was probably a machine gun !

[@booiedeus8539]

Save them sal8s, not many left