Nespresso Reusable Pod Review | SEALPOD | Stainless Steel Refillable Capsule With Aluminium Stickers

[@lizpanter7865]

The sample coffee packet that comes with the sealpod is just to show you the grind recommended, it’s not to use!

[@bobmerle1]

The sample coffee that you referenced from the previous video, which you stated you did not like. Says on the envelope, "Ground coffee sample for gring (grind) reference only, not for drinking." The sample is meant to give a starting point for the fineness of the grind and the amount of coffee to use.

[@gmask11]

Dang, I'd probably forget it was in the bin and chuck it out with the other used capsules! That whole coarse/fine grind, tamping, etc is one of those things that capsule machines completely simplify. I've been experimenting with the nanopresso and finding that it's a learning curve for each type of coffee you buy. I'm not sure if I'm up for doing that every time I want a coffee, but the difference in weight of coffee and the freshness intrigues me.

[@A2BProductions]

Yeah it’s a good point about forgetting it’s in the used drawer as could happen, unless you’re using only this I guess. Like you I’m intrigued by the idea of fresh beans but it’s intrigue vs the hassle of (as you say) finding the right grind for each bean etc and the extra cleaning with the machines. Nanopresso has popped up a few times in the comments so will have a look and see what it is 👍🏼

[@DuaineM]

I have been using a Geesta product with my Breville VertuoLine Nespresso. You reuse the Vertuo pods. You just fill the pod with the coffee of your choice, tamp it down, put the foil on top and make sure the adhesive has a good seal on the top of the pod. As you said, getting a very fine grind is important. Then play around with the amount of coffee you put in the pod. My experience is the pod needs to be filled enough so it is packed in tightly. My main coffee I like is Caribou Coffee Mocha Java. I was surprised at how well it works and the quality of the results of using my own bootlegged Vertuo pods. I have about 6 pods of each size I do mark the bottom of the pod the size like E, EE, L5, R and BIG. If I start using different coffees I will need to adapt my code system and dedicate some pods for the new coffee. NOTE: If you don’t like grounds in your coffee make sure you get the foil on properly. The trick is you have to make sure stray grounds get on the lip of the pod. If you get a kit like mine a little brush cane with it as the tool you use to brush off the lip and turn the brushed pointed up you use the top of the brush to secure the foil to the lip.

[@A2BProductions]

Great info as usual Duaine 👍🏼 Thanks for that and will take a look at those pods. Not sure I’ll be able to get that exact blend of coffee over here but you never know.

[@matthewryan2101]

Good demo. I got these delivered this week and have been disappointed to date. I am using the DeLonghi Lattissima touch machine and got a grind delivered by a local café that ground it so it was suitable for reusable pods. I've tried tamping firmly, not firmly and different cup sizes and all seem to be pouring very weak coffees. The flow isn't as smooth as the regular Starbucks pods that I use; sometimes, only drops of coffee are poured. I hope that descaling the machine might help with the flow issues.

[@A2BProductions]

Thanks for sharing your experience Matthew. It's not the easiest thing to get right is it. Suppose if you're able to get find the perfect grind and method, though, then could save some money. Might have to unpack them and give it another go myself.

[@xaninator]

Something I read was to open a Nespresso pod to measure how much they use and the type of grind

[@A2BProductions]

Yeah that’s a good idea if you can figure out the right grind setting from that. If you can match that with a coffee that works well then hey presto I guess 👍🏼

[@jent8426]

Thanks for the review! I might consider something like this for Vertuo since the pods are more expensive and have fewer options.

[@Daldidal1]

I’ve been thinking about this because a) I’m cheap and b) the Nespresso pods are expensive compared to a bag of coffee I can grind myself. Thanks for the review!!

[@A2BProductions]

Yeah they are supposed to save you a bit if you don’t mind the extra time making them.

[@KyliesCreativeCorner]

Hey, I love your channel! You’ve made it so easy to pick my nespresso vertuo plus machine, I was a bit confused at first, so thank you. One question tho... is there a way to dispense only hot water from a vertuo? My husband drinks tea so it would be perfect if there was a way to get hot water somehow... perhaps from a reusable pod... or maybe reusing an empty vertuo pod? Keep the videos coming xx

[@A2BProductions]

Thanks for that, glad the videos helped. My initial reaction would have been to say no but I'm not sure now you mention the reusable pods, I'll have a look into it again. One way might be to put it into descaling mode obviously without the solution - we have a video on the channel showing how to do that but you basically tap the button on top 3 times in rapid succession with no pods in and then tap it again to stop the process, it might take a few tries to get the knack of it. The water that comes out for the first few seconds will be a bit nasty though, as will have coffee particles in, but might work for you if you discard the first bit of water. My only worry is that doing that too often might not be great for the machine but just doing it occasionally might work. I only thought to mention this as a subscriber said a few weeks back that he does this from time to time just to clean his Vertuo machine out with hot water between descaling.

[@audunjemtland8287]

How does the machine NOT punch pierced holes into the refill pods?

[@A2BProductions]

Hi there. There are lots of tiny little holes on the back of the stainless steel pods.

[@privatename542]

@@A2BProductions ... right there are holes. But you think the machine "Sees" those holes and says -- "Oh there are holes already there, let me not try piercing into the steel pod" No. When you pull the lever down, those 3 hollow needles are being bent and damaged.

[@JohnJones-ky6ki]

@@privatename542 No, the sealpod are shorter. So the knifes wont reach it.

[@CJSpangler316]

Cool - I was actually thinking about maybe with hot chocolate mix

[@A2BProductions]

Never thought of that, would be great if there was a way to make that work 👍

[@valleek2434]

I bought the one that is for the Aldi machine and instead of the sticky lids, it has a silicone top. I have tried different coffees and different methods of putting the coffee inside the pod (loose, compacted…) but the grinds of coffee comes through into the mug when done. So annoying.

[@A2BProductions]

Thanks for sharing!

[@jokehendrikx5175]

Hello! Thank you for all your video's. Yesterday I got my Espresso machine Essenza Mini D30, the same one you are showing in your video. I am looking for a stainless steel capsule with a stainless steel lid. I don't want to use stickers. I have found those capsules, but I don't know whitch ones will work on the Essenza D30... Have you found any that work?

[@A2BProductions]

Haven’t tried any of the metal lid ones but will take a look and see if I can find some with good reviews to review myself 👍🏼 Hope someone is able to recommend some for you!

[@kyactus4325]

In your opinion, is it true that some compatible capsules are harder and damage Nespresso machines after some time? I have been using compatible capsules for some time and now the original capsules seem to make coffee too liquid

[@joseluislopes3956]

In my experience, yes. I've seen machines working multiple years with no problem, and others having the capsule mechanism fail in months, and it is more common with people I know to use compatible capsules. It all depends on the brands of course

[@A2BProductions]

Hi there. Being honest I’m not really sure but it is something I worry about. The Starbucks (made by Nespresso) L’or and Illy pods all seem ok and some of other ones I’ve tried seem thinner so would hope they will be ok, but I do worry about the plastic ones and even some compostable ones (not all compostable pods are the same) which I got recently as they seem really solid, hard enough to put me off using them I think. Sorry I can’t give a definite answer.

[@raz8881G]

Which machine is the best in your opinion? I'm thinking of buying the Nespresso vertuo plus that you have is it a good all rounder?

[@A2BProductions]

That's the machine I prefer out of the Vertuo range but I do prefer the taste and variety that comes with the OriginalLine machines (especially with the compatible pods available for those). Really tough question to answer as there are so many factors involved but we have some videos on the channel which might help you to decide. Maybe check out our Nespresso Machine Reviews playlist if you have some time free one day.

[@raz8881G]

@@A2BProductions Thanks so much for your help keep up the good work

[@mustafab.7365]

What is the grind size or what should be? Is it compatible with essenza mini where can I get buy the best reusable pods? Should I grind espresso or filter coffee grind?I have a Timemore Chestnut @t many clicks do you recommend for best flow and viscosity?

[@A2BProductions]

Hi there, for grind size it seems as fine as possible really. Yes it's compatible with essenza mini and I think coffee beans suitable for espresso would work well. Not sure on the other question I'm afraid.

[@gemmapalmer3801]

Awesome review chief

[@A2BProductions]

Glad you liked it 👍

[@Palemaster13]

so what we see here is smthn like less than 10g of coffee, beeing filtered with about 50-60(?)ml of water, in about 10 seconds?

[@safinnair7502]

I had bought a reusable pod with plastic lid. The coffee was not frothing like it did in this video. So I think it must be the aluminum stickers which did the trick, isn't it. Also, could you please add the link , from where you bought this reusable pod from ?

[@A2BProductions]

Hi there. Yeah I amazed how well the crema came out with these. There's a link in the description to where I got them from too 👍

[@safinnair7502]

@@A2BProductions Thanks

[@arriesone1]

The faff aspect puts me off, think I’ll stick with the proper pods, I do give them in for recycling though.

[@fufuufuf4023]

I was curious about these kind of reusable pods... I think it is worth to use it if it Will not cause any defects to Nespresso machines...

[@A2BProductions]

Yeah machine damage is the main concern isn’t it. Was interesting to finally try them though.

[@wesley2012ist]

Have you tried the one for the vertuo lines? Also i found on amazon a converter from orignal to Vertuo have you seen and/or tried those?

[@A2BProductions]

Hi there. We have reviewed some VertuoLine ones - here's the link kzbin.info/www/bejne/qnStqmN6mqh4r5o - but we haven't tried the converters yet. Will certainly try and review those soon, though.

[@ignaciofores]

I tried multiple grinds, different levels of pressure (how hard to push the coffee) and I only get almost transparent water. Ideas?

[@A2BProductions]

Have you tried different types of beans? (not sure if this is what you meant by grinds) I managed to get a beverage that resembled coffee most times, but some beans definitely worked better than others. Might be worth trying one specifically labelled as an espresso bean.

[@ignaciofores]

@@A2BProductions by grinds I meant how thick I grind the coffee. I will try espresso beans, although I like to do lattes with the machines

[@eliliupy]

@@ignaciofores You can try using Lavazza or illy Espresso coffee, the result is very good..

[@bethetruth6428]

POD Cast.

[@A2BProductions]

We do have one you know... just need to upload some new episodes 😀

[@alfauzan2894]

can this be used with wacaco nanopresso?

[@LAknightYEH]

Mate, where is the coffee you used from? Loved the bag it came in.

[@A2BProductions]

They're called Scott & Co. Just added it to our Amazon store actually in case you want to see what comes in the bag. (Link in description) Colombia blend was nice but haven't tried the others yet.

[@LAknightYEH]

A2B Productions thanks mate. Are all the coffees in that bag suitable to go into the reusable pods you showed?

[@A2BProductions]

Being honest I’m not sure but I’ll give a few more a try. I did grind the Colombia one down a bit finer with a pestal and mortar and that helped, but not sure if you should really do that or not taste wise. The Milano espresso one was a bit strong for my taste but didn’t try it with milk. Just a case of trial and error with these I think and finding coffee blends or grinds that work well. You can also buy grinders if you want to grind the beans from scratch.

[@MyCovertNarcissism]

I was really surprised by this, i was expecting it to be awful but it actually looks really good. I'm not 100% sure I could be bothered to go through the process every time but it's a nice addition to an every growing fun hobby.

[@A2BProductions]

That’s exactly how I feel after using them you know. Don’t think it’s something I’ll be using every day (as it’s a bit of a faff) but nice to know it’s an option if I see a certain blend I want to try or can find one that works really well. As long as they don’t cause any machine damage of course.

[@bobsmith4019]

Why hasn’t anybody talked about the glue and hot water HEALTHY ?????

[@sharmzy]

Oh no certainly not for me, I need to pick a pod already prepared and just go🙄 good idea though, I agree if recycling or Nespresso pods not available. Thanks for trying it out for us all.

[@MattMcQueen1]

I agree. Kind of defeats the purpose of Nespresso pods.

[@A2BProductions]

Yeah it won't be for every Nespresso owner but does have certain plus points, so thought it was only fair to bring them out as it did create a decent shot of coffee.

[@IAN1000IAN]

I couldn't be arsed

[@nermabajramovic8522]

I've been thinking of this because I want to choose my own coffee, its freshness, and bland. I don't like to drink some blends prepared for me a forehead. And with the machine, I am pretty much limited to what they pack in the bullet and put out there for me to buy. And, look at that crema! I want that!!

[@A2BProductions]

Yeah it could definitely open up other blend options if you can get the right grind of coffee. I was surprised with the results and it actually inspired me to give a bean to cup machine a go!

[@0GRANATE0]

​@@A2BProductions before I didn't know that you have to stick that "alu sticker" over the pod after filling it up with coffee.. this is just annoying and it is fully against the idea that you don't have to buy anything else than coffee afterwards.. you still have to buy those stickers everytime and not to forgot the stock at home -.- useless.

[@renzjervissanandres2402]

I cant get that kind of crema with my reusable pod

[@khw210]

Have you measured how much coffee you've filled your SEALPOD with? The Nespresso compatible capsules I'm using now contain 5.1 grams of coffee. I'd think that using 5.1 grams would be a good starting point for me and aid in consistency.

[@A2BProductions]

I didn't measure the weight but have just bought some mini digital scales, so will definitely give that a go 👍

[@patricebennett1100]

Thank you. I really wanted this until you explained its aluminium cover. For me the reason to have it is not using aluminium as it is disastrous for our brain health. Damn it. Oh well thank you for the video. It looks like it works really well. 🌼😘 love from Australia 🇦🇺

[@A2BProductions]

Glad it helped and hope you find a solution that works for you! All the best from the UK 🙂

[@TheKurtLyon]

Fantastic!

[@A2BProductions]

👍🏼

[@aalhajri4626]

Nice to try another flavor not by Nespreso in Nespreso machine 😝

[@A2BProductions]

There’s a world of beans out there 😂