AE86 Project | Shaved Engine Bay Pt.1 | Bike Carbed 4AGE Automotive Build Vlog | Toyota Corolla AE86

Thanks for the care package Max!
KZbin: / maxpham
Instagram: / 86_yota
Installing a zenki lip on a kouki front bumper:
www.club4ag.com/forums/viewto...
Inital Dweebs: / @initialdweebs4050
In todays video we are starting the process of shaving the engine bay on the bike carbed 4AGE ae86 project. Man is it a lot of work! Shaved engine bay s take time and boy am I figuring that out now.
In the last couple of videos we attempted to start the recently completed ae86 engine swap. The 4age engine swap was converted to run off of a series of bike carbs from a Yamaha yzf600r motorcycle . This jdm bike carbed 4age 16v engine will power the ae86 trueno coupe. The jdm 4age 16v engine is out of an AE92 and was converted to also run in the ae86 rwd orientation. This automotive build vlog documents the complete ae86 build project and the obstacles that may get in the way with a diy jdm project car.
In this video I also explain how exactly I am going to tackle this part of the project. I need your help and opinions on what to do with the seams in the shaved engine bay . Do we fully weld and shave or use a thin bead of seam sealer? In any case we have to complete the engine bay before we paint the ae86 build project . Stay tuned for more update to come on the project ae86. Maybe one day we will take the ae86 drift ing !! ea86 ae68 corrola toyoda ae86 project
Music by Joakim Karud / joakimkarud
Joakim Karud - Rainy Days [From The Archive]
Joakim Karud - Milkey Way
Creative Commons Music:
Ship Wrek & Zookeepers - Ark
Creative Commons Sound Effects:
Sound Explorer - 1206462561 - Gum Bubble Pop
Punch_Swoosh_Series
Ding - Sound Effects KZbin
Songs and sound effects fall under Creative Commons License: CC-BY-SA creativecommons.org/licenses/...
If you enjoyed this video, please like, comment, and subscribe. Also take a second to watch and subscribe to other automotive youtuber s. Stay tuned for more ae86 and other project progress! Also, feel free to follow me on Snapchat, Instagram, and Twitter. Comments, suggestions, and constructive criticism are always welcome! ae68 ea86 content.
Shapchat: TheBSRecord
Instagram: / thebsrecord
Twitter: / thebsrecord

[@dadstoygarage1878]

little tip that you may like for welding up all the holes when I did my engine bay I used a small flat bar of copper/brass (either works). The weld does not stick to the copper/brass. so you hold the flat bar to the back side of the hole and then weld it up. less burn through and speeds things up. minimal grinding needed.

[@TheBSRecord]

This is a great tip! Sorry for the delay in replying to this comment, but I actually smashed up a copper pipe in a later video and used it just as you described. It worked really well to help fill up holes I burned through on. Thanks for watching, commenting, and tuning in!

[@boosted_john]

I dig your editing style

[@TheBSRecord]

Thanks a lot man, I appreciate the feedback!

[@KyushaStyleTuning]

Excellent video again. Welding the seams then grinding flat followed with a skim of filler would look amazing. I regret not doing more smoothing on my 88 Nissan pulsar 👍😎

[@TheBSRecord]

Thanks for the input, I am still wanting to do exactly that, I just have to motivate myself enough to go full send! Thanks for tuning in!

[@andrewcowden9704]

Stitch weld and seam seal is going to be easier for sure. That much heat on old metal could lead to cracking down the road. You would really have to be careful no to overheat areas while doing it. Its not like you can run a continuous bead for each seam. If are going to be welding, adding some reinforcement plates/angles to engine bay would be a good idea. I know MotoP had some information on where to add them on the old Club4ag forums. Also the @juiceboxforyou guys shared a company in Ireland that's making a reinforcement kit. AE86's have long been known in the community to crack where the frame rail meets the fire wall. A simple steel angle there really beef things up.

[@fooglez]

Extremely underrated channel brother. I've been contemplating doing my own body work on my FC and you're selling me really hard on doing it myself. Thanks for the motivation and body work tips. Hope your channel takes off dude.

[@TheBSRecord]

Sorry for the late reply, I must have missed this comment! Thanks for the kind words,I really appreciate it and I hope the channel takes off sometime too! Guess we will both see in due time. Bodywork isn't hard, it just takes a lot of time an patience. With that being said you can definitely do it yourself!

[@tomknud]

Swiss cheese! Looks like a lot of work!

[@TheBSRecord]

Hahaha It is A LOT of work! I knew it was going to be a project going into it, but I didn't realize just how much work would be involved. With that being said, I should be posting another vid this week, so stay tuned!

[@edwindeleon4486]

Watching your videos helps me get motivated to finish my 1974 celica gt. I'm doing a 3sge beams swap to it but first I think am start with the bodywork.

[@TheBSRecord]

That's what it's all about, inspiring and motivating others to hop on their projects! Goodluck with your build. Remember, Rome wasn't built in a day and bodywork is no different haha 😂

[@ShedLife]

Nice man!! When I did mine I welded the seems, however I didn't weld them 'solid' as it were, but just did like 1/2inch welds in spaces. Then grinded those and filled over the tubs with filler and just used seem sealer on the top seems.

[@mikekerezsi9672]

Lets see more

[@TheBSRecord]

Definitley slow but its still being worked on, I'll post an update soon!

[@gizumoauto]

Nice video! I've been trying to get my own ae86 now! Thanks for the inspiration!! I love binge-watching ae86 content and yours is really good! You and the juiceboxforyou guys are my favorite!

[@TheBSRecord]

Thanks so much for your comment, sorry I am replaying to it so late! I love the juiceboxforyou guys, their videos are always so entertaining to watch, RINGS LAD!! Thanks for watching and tuning in!

[@jordy0208]

Looks really clean. Looks like you've got a good one there

[@TheBSRecord]

Thanks man! The rust was pretty minimal on the car given its age. Thanks for tuning in!

[@ruikazane5123]

Whoa...now that's ChrisFix there! But with all the hard work!

[@TheBSRecord]

Haha thanks man, glad you enjoyed it!

[@daltonwiggins8302]

Dang I just watched the last 8 vids to catch up before I saw this one and put them on 2x speed. Watching normal speed is so weird now lol. Anyways I'm hyped for this car, keep up the great work!

[@TheBSRecord]

Haha thanks for tuning in and watching all the vids it really helps promote the channel! Glad you enjoyed and many more updates to come on this thing 👍

[@willmatic84]

Weld it i think is better and cleaner than seal and makes it a lil stronger 💪🏼😋👍🏼

[@TheBSRecord]

Thanks for your comment, I am for sure leaning that way!

[@johntunnage3098]

doj theme song ? lol

[@jacobcharlton4542]

If you seam weld it should make the chassis stiffer. If your going for more of a street/weekend car I would seam seal it. Love watching your vids.

[@TheBSRecord]

Thanks for the input! I think I am still leaning on the side of seam welding and grinding but are still not 100%. Thanks for tuning in and supporting the channel!

[@xxx666xvx]

fuse box relocation need for true clean engine bay

[@TheBSRecord]

The more I think about it, the more I am leaning that way 😎👍

[@xxx666xvx]

@@TheBSRecord write me, if u want, I can give info about this wire work

[@boroboroae86]

Stitch weld the seams > looks.

[@oscaritorubi7997]

i have a rust bucket also haha, i wish i had the time to fix it my self, love my rusty 86, even though i hav the lower powered engine!

[@TheBSRecord]

They are fun little cars that's for sure! Hopefully one day you will be able to restore it, it's a labor of love that's for sure haha. Thanks for watching!

[@ENGINERESCUE86]

If I took the time to do this I would 100% weld/grind the seams.

[@TheBSRecord]

Thanks for always tuning in man! I am for sure leaning that way at the moment 👍

[@doctahwhoopass285]

Please wear safety goggles when you use those wire brushes. If you get a wire in your eye it can rust inside and you may lose your vision!

[@TheBSRecord]

Definitly a very good point. I have regular glasses on but I do need to be better about using the proper safety equipment. Thanks for watching and commenting 👍

[@bigbeangames6297]

Are you considering another engine swap in the future? Maybe a 7age or a newer Honda motor?

[@TheBSRecord]

Thanks for watching and commenting! I am still going to run the 16v 4age and currently do not have plans to swap it with another engine. If I did swap it though, it would probabaly be swapped with a beams :D. Thanks for tuning in!

[@biupS]

Spot weld / seam seal then bondo over the seams and all the useless holes in the bay!! Make it a legit shaved bay. Paint that bitch and have a show/daily!!!

[@cesarsullivan7193]

Tuve que vender el mío por no encontrar piezas u.u

[@TheBSRecord]

No bueno! 😭

[@ThePunisher-sg1jg]

Why the gay elevator music?

[@OrangesandRice]

Edited because KZbin is an autocracy now.

[@TheBSRecord]

I wouldn't call it that, but to each their own.

[@TheBSRecord]

@@OrangesandRice shupppppp with emmmmmmm bububububub lol