This helped. Where do i find the subsequent re-assembly video?
@jeffmoon4944Ай бұрын
What about the spring that returns it maybe little stiffer and as short as you stiffen it so it has no rebound ?just a thought I don't have that issue ,but it's a good trick .seems we have to repair all aea for reliability!
@legolasxD142 ай бұрын
thanks for you video, I appreciate. I have a malfunction with the cocking handle, because when I try to charge the pellet, the handle is blocking against galarian magazine and I need to move it manually to charge the pellet :/ Has anyone had a similar problem?
@mtairgunner40442 ай бұрын
I have the same problem, only does it with 2 of my magazines and my 3rd one works fine. There is no adjustment that I can see and haven't looked into it to much because I usually only use the one mag. I will try and look into it more next week when I'm off work and see if I can see a way to adjust or fix it.
@surreallife7772 ай бұрын
I just purchased the Artemis PP750. I'm going to modify the gun through internal adjustments and some modifications. I'm just wondering how many shots do you get from your gun once it's modified? I believe standard unmodified 22 caliber is around 50 shots
@v6pulsar3 ай бұрын
Excellent tutorial. Thanks for showing us how.
@alejandrogigena47693 ай бұрын
felicitaciones gracias por la informacion, voy a practicarlo en mi nuevo aea sf sniper ya que solo lo puedo disparar hasta 160 bar. thank you so much
@rudy_yazz73073 ай бұрын
hello, really a good, useful video. If I may tell you, what is the original factory size of the thread on the regulator that is connected to the filling tube thread? and what is the thread size on the air filling tube? Is the thread on the regulator M18*1.5 in diameter and the thread on the air filler or large bottle M30*1.5? Is that true? Thank you for helping
@mtairgunner40443 ай бұрын
Thanks, I'm not sure on the thread sizes and have given this to my father-in-law so do not have it anymore to check. You might be able to find out on gatewaytoairguns site there is some really good threads and info on the 700 there
@rudy_yazz73073 ай бұрын
@@mtairgunner4044 okay, thank you for the advice, hopefully you will always be given goodness, thank you
@fongxiong83033 ай бұрын
Do those air blockers work and do u have any for sale?
@mtairgunner40443 ай бұрын
These do really help with the cycling and not chewing up the magazine. I don't currently have any but if you know anyone with a 3d printer I have the file on thingiverse.com. also was told that a empty. 22 casing will fit perfectly.
@fongxiong83033 ай бұрын
@@mtairgunner4044 yes i tried the empty .22 shell casings with a little tape to make them sit snug in there. It work fine. I covered 4 holes and noticed the firing pin does not slam like it used to. Thanks.
@Nothingness08923 ай бұрын
Hi Great video but can you make a video about how to lubricate and clean an Artemis pp700sa? It would be very great cause i haven't found anything anywhere about lubricating and cleaning of artemis pp700sa
@joelrodrigo4 ай бұрын
Hello, I try to find a replacement for the screw of the regulator 27:27 does anyone know the size of the screw or its specifications for buying a replacement that can fit in, please help me.
@DBRGB4 ай бұрын
Fantastic job!!! And no stupid music. Just great video content that’s informative and step by step instruction. Thank you!!!!!
@jobikejo14084 ай бұрын
Ara Challenger pro desasambi
@trickyman67844 ай бұрын
In the lapse of time 2:08 that screw i my rifle was broken and I can’t find it any help to buy it in somewhere!!
@mtairgunner40444 ай бұрын
You will have to contact Hatsan and see if they have a replacement or where to get one. On hatsanairgunsusa.com they have a number to call or a form that you can fill out.
@jamescooper11544 ай бұрын
Any reason why my hp ss 22 leaks air out barrel and won't fill
@mtairgunner40444 ай бұрын
Broken valve pin is the most common with those symptoms. If you have warranty left I would contact who you got it from and they will send you a replacement. If your out of warranty time frame you could check ebay there was a guy selling improved valve pin replacements. I haven't used them but have read some good things about them.
@mtairgunner40444 ай бұрын
Vstar1100pw is the sellers ebay name
@longyx3214 ай бұрын
These pistols are brilliant... So tuneable..
@vihreelinja47432 ай бұрын
To make the barrel "thread insert" to stop spinning. Remove the screw from the rear sight and insert a longer screw. That screw will bottom out against the outer threaded part in the breach of the barrel and will stop it from rotating when mounting the barrel. Just bought one of these pistols and it is suprising how accurate and easy to tune this thing is.
@steverodgers98495 ай бұрын
Can you adjust the hammer spring to increase power?
@harriku.14875 ай бұрын
А нагреть до 80 градусов мозгов не хватило? Никогда это не повторяйте.
@sunnesonne5 ай бұрын
So adjusting the regulator and hammer spring should be good enough to increase velocities?
@mtairgunner40445 ай бұрын
Yes, to a point you will see some increase.
@sunnesonne5 ай бұрын
@@mtairgunner4044 I think I should be able to get it to 600-640fps with 16gr by just adjusting screws; is the aftermarket regulator a must for it? Forgot to mention, I was unlucky to buy a Canadian version that someone imported to US, so it’s very slow, gets 460fps with 16gr
@mtairgunner40445 ай бұрын
@sunnesonne The stock regulator is OK, just worth it to upgrade when it goes bad. Being a Canadian version you might not see any increase without drilling the transfer port.
@sunnesonne5 ай бұрын
@@mtairgunner4044 I think it should be 4.4mm hole
@mtairgunner40445 ай бұрын
@sunnesonne I can't remember for positive the size but that does sound about right
@vnv19725 ай бұрын
Здравствуйте, подскажите где можно приобрести такой регулятор давления
@jamesdiamond57256 ай бұрын
those is cool take care all the rats in the backyard
@poacher.6 ай бұрын
good . i like it
@Sirfixalot19697 ай бұрын
Excellent video, thank you for the information.
@captainplanted84987 ай бұрын
GREAT VIDEO!!!. we need more breakdown videos like this. It is very helpful. But more often than not all we ever find on KZbin is bias paid reviews on most things. That have very little information other that how far it will shoot lol. Good job keep up the good work
@thomasliedtke72138 ай бұрын
verry , verry good job !!!! Thank You . greatings from thomas / BERLIN-GERMANY
@DBRGB8 ай бұрын
Same thing happens with .30 cal HP SS PLUS, so will try your fix to see if we can get better shooting. Thanks.
@davidbos94788 ай бұрын
THIER GUNS JUST DON'T WORK PROPERLY. THE TERMINATOR IS A TOTAL BUST!!!!!!!!
@TheOneLifeRider9 ай бұрын
Those little fingers playing with the ruler... All the best to your little helper!
@Vera-xu3xw9 ай бұрын
That thing you called a piston is adjustable. Mine came adjusted about an inch away from the thing where you put the plugs at the front of the barrel. The adjustment will do a better job than the plugs. Im shooting the 18,13 gr Diabolo witch i think are slightly longer than the Crossman
@blacmex139 ай бұрын
What's a good Oring kit? I bought one from Lowes and nothing fits
@mtairgunner40449 ай бұрын
You can order individual orings from the oringstore.com, harborfreight.com also has some big kits 1 in a blue box and 1 in a red box that I have had good luck with.
@blacmex139 ай бұрын
@@mtairgunner4044 I appreciate it!!
@svzgditeam591910 ай бұрын
funny many of you call it a moderator, to me that term is too generic, that's why we call it a 'silencer', more specific and clear don't you think?
@mtairgunner404410 ай бұрын
Normally I call it a silencer, but online I call it moderator as some people get upset over it. They say it mixes airguns with powder burners 🤷♂️.
@vihreelinja47432 ай бұрын
@@mtairgunner4044 lol. Why would it matter as both serve the same function.. I have a Silencer from a 222 in my 6.35mm air rifle so should i call a moderator to the site :D "purists" are one of the most annoying people around.
@kellyw164810 ай бұрын
I have changed my valve pin like four time and Bin Tac sent me a better valve pin this time, but now when I changed it out my gun is leaking out where you put the fill probe in. I guess that I need to figure that out now. 😮💨
@mtairgunner404410 ай бұрын
This brand seems to be a lot of work, but fun when it does work. If this valve pin doesn't hold up you could try ebay seller vstar1100pw. He makes a upgrade valve for these. As for fill leak it if I remember right it should just be an oring inside the the air cylinder piece that your fill probe goes into. Will need a Allen key to pull out the little screw. Sometimes you can also snug up that screw a little and will stop the leak also.
@user-ou1og5fo1p10 ай бұрын
Здравствуйте в Россию отправите клапан и редуктор ?
@nlfn195910 ай бұрын
Very informative…..thank you sir and the little one is amused 😂😂😂
@dstmotion615311 ай бұрын
Hey i wanted to ask, for the transfer port part, you unscrewed the bolt with the flathead screwdriver. I was wondering where can I buy that pin/nut/bolt or whatever the name is called?
@mtairgunner404411 ай бұрын
I would message Terry at fox air power, he might be able to get you the replacement part you need. foxairpower.com/pages/contact-us
@ipreflinproject4737 Жыл бұрын
the tube looks thin, how many mm thick is it with how many bar working pressure?
@datudapz7529 Жыл бұрын
Its a great 👍 video.... Thanks for the idea 💡
@arbythepainter Жыл бұрын
What are those cones for?
@gilbertmartinez6538 Жыл бұрын
Did you get a count on all the o-rings? Doesnt look like there is nearly enough in that kit from Hatsan
@mtairgunner4044 Жыл бұрын
The kit had every o-ring in it for complete replacement of them all.
@gilbertmartinez6538 Жыл бұрын
@@mtairgunner4044 what was the count? ...and are you a gunsmith?
@mtairgunner4044 Жыл бұрын
If I remember correctly there is 22 orings in the kit. I do gunsmithing on mine and local guns for air and powder burners.
@jrosario223 Жыл бұрын
I have the same pistol and the guide rod stripped off of the bolt. Its threaded brass into aluminum with like 5 threads deep. A definite design flaw. I believe the barrel was tightened so tight that it twisted the barrel causing so much friction against that rod and bolt!
@floridamanrun463 Жыл бұрын
What are you running your reg at? I have a 22 and a 25 convection I bought from Airgun Archery fun in Canada. They are really great guys. My 22 is running like a top at 120-125 shooting AA 16 gr at 600 fps, perfect for my needs. The 22 has an Altaros reg. The 25 has a Huma and I can find the sweet spot with it. I’m going to try the mods you did with the 25.
@mtairgunner4044 Жыл бұрын
I currently have my reg set at 110 and am right around 650 fps with the Crossman 14gr
@jon1613 Жыл бұрын
I don’t have a 3D printer but I’ve tried the m14 washer trick and rotated the piece to adjust spring tension (3 turns). It works a lot better but still jams every mag. Tears up pellets. Gotta turn upside down and get chewed up pellet to fall out. Sometimes it will go thru a mag and then jam on last round.
@mtairgunner4044 Жыл бұрын
I have had had people tell me that 22LR casings work as plugs also. If you have a 22 or stop by a gun range might be able to get some brass to use as plugs. The other thing you can try is to tighten up the magazine spring one rotation which might help whith the last round jamming.
@jon1613 Жыл бұрын
@@mtairgunner4044 I’ll give those things a try. It’s almost comical at this point - every few mags the cover for the bolt pull come flying off, magazine jams or double feeds, random hex head screws fall out, a tiny spring flew from I dunno where, and chunks of chewed up pellet comes flying out sporadically. Why would anyone even sell this poorly machine and engineered garbage in this condition?
@troynicolls5377 Жыл бұрын
Thank you!
@cell_creator Жыл бұрын
Useful videos, especially the disassembly. Instead of trying to change the spring tension, and blocking the returning air, have you tried to damp the actual bolt hit when it pushes the pellet? With an o-ring or something similar? Since the problem is the probe rebound, it looks like that it hits something solid and bounces back. Maybe a simple o-ring somewhere in the assembly will dampen this rebound. Thanks.
@lachezarkrastev1921 Жыл бұрын
Where is the breech seal my friend?
@DaleAllen Жыл бұрын
Very helpful video! what brand/model of bottle clamp you’re using to attach the bipod. Thanks!
@mtairgunner4044 Жыл бұрын
I got it from bintac @ aeaairgun.net
@user-ip8fy1zn1e Жыл бұрын
气室是外经35mm。内径26mm的钛管吗?
@mindmanifestations2036 Жыл бұрын
Dude how crazy is it that it takes 5 x the amount of time to strip down my crosman 1332
@mtairgunner4044 Жыл бұрын
These are really simple to work on, which is nice.