Aftermarket LED Side Marker Lights Install | 2015 Chrysler 200

Whats up guys, today I'm installing these sweet aftermarket side marker lights i got off eBay i will drop a link in the description below so if you guys would like to get a pair you can !
Thanks for checking us out and feel free to comment on the video, I want to know what you think about the lights!
Drop a Like And SUBSCRIBE !
Aftermarket Side Marker Lights
www.ebay.com/itm/For-2015-201...

[@smdjuhurr9474]

Just ordered mine(6:22am) lol thanks for the video

[@moderatemods98]

Rozay Tawiah haha that’s awesome your welcome bro !

[@bushgnome]

Just put these on my 2015. They look so awesome! One piece of advice for everyone, don't go trying to pry the oem ones out with a screwdriver, they will break. You have to pull back the fender well a bit and remove the 2 10mm plastic nuts first.

[@moderatemods98]

Glad you enjoyed them bro 💪🏽💯 and thanks for the advise !!🙏

[@shawn33321]

how the hell do you get those two 10mm nuts off? I cant fit my ratchet in there and i can't see what i'm doing.

[@andieneumann6198]

Looks sweet! I’m going to buy them for my 200

[@moderatemods98]

Andie Neumann awesome bro I’m glad I can be a help !!!!

[@soledout9426]

Somebody need to sponsor you ✅✅🙏🏾 never disappoints

[@moderatemods98]

Soled Out thanks my boy same to you keep grinding !💯❤️💪🏽🔥

[@bjdavis0128]

Yeah I'm definitely about to order these!

[@moderatemods98]

That’s what I like to hear 🤣💪🏽💯🔥

[@bjdavis0128]

Moderate Mods yessir! ✊🏽😂 another question though. Your LED tail light bulbs, did you need a ballast or anything for the bulb or is it just plug and play with just the bulb. I was told that with LED bulbs, if it’s doubling as a turn signal, it will make the signal flash extra fast if you don’t have a ballast or whatever it is with it.

[@moderatemods98]

Jamal_Davis hey bro so I don’t have a ballistics but my lights don’t hyper flash but my dash turn signal does lol and honestly it’s so quiet it doesn’t bother me , that or my music is just to damn loud 🤣🤣🤣

[@bjdavis0128]

Moderate Mods 😂😂😂 oh wow. Yeah that turn signal in the dash is real quiet for real. But then again i always keep my music up too so 🤷🏽‍♂️😂. You ordered your bulbs from eBay as well?

[@moderatemods98]

Jamal_Davis actually homie I picked them up from auto zone 25$ and they were the super brights and work great for my tinted tail lights 🔥💪🏽💯

[@dominusgallegos2771]

DOPE ASF gonna get them as well. You should set up an affiliate account so you can cop that commission.

[@moderatemods98]

Mike Gallegos lol I wish bro but glad you like em they work good as hell !

[@Conscious3]

Did you have to adjust any fuses, After you installed the LED side markers?

[@jacobcobal5411]

Would this work for the back side lights too? Or is that a different size? Appreciate the content bro, givin me hella ideas for me 15 limited

[@moderatemods98]

Haha no problem bro you know I’m not stopping anytime soon ! And honestly I don’t know bro if they do that would be hella custom 🤣🔥👀💯💪🏽

[@rauladame2105]

It makes sense, why have all the lens with no light behind it? Looks good. Thanks for the link for the side markers.

[@Teegotkickz]

Do they work on a 2016 Chrysler 200 LX ? . I just ordered from eBay, both front and rear

[@JC.506]

Are the back markers the same size as the front ones?

[@Joeyblackblue1408]

One question how are the LEDs holding up any flickering issues or Mountain functioning issues because I know with aftermarket LED headlights or light bars on some trucks I will notice that half of the bar lights up on the truck beds

[@moderatemods98]

Joey Freedom they are actually running great ! And no flicker issues man

[@Joeyblackblue1408]

@@moderatemods98 thanks I just ordered me some for my 2015 Chrysler 200S

[@moderatemods98]

Joey Freedom yessss ! I hope you enjoy

[@829sha]

Quick question man.. are they just plug and play or do I also need the LED bulb in order for them to turn on ?

[@moderatemods98]

Plug and play bro !

[@829sha]

@@moderatemods98 thanks a lot man

[@moderatemods98]

@@829sha no problem bro ! Hit me up any time with more questions !

[@joseolivares7816]

I have the same car what about the back ones? All my side markers don’t light up no more I saw on eBay but found the front ones only.

[@moderatemods98]

So basically the 200s don’t have power to the rear ones , the 300s do but not the 200s

[@joseolivares7816]

@@moderatemods98 thank you I just placed my order I been watching ur video to install them lol

[@carlericpickett597]

I did my front and rear.

[@xquisiteoutlawz158]

Hey how are you doing? I have a few questions for you in regards to the lights.

[@moderatemods98]

Good man sorry been very busy what’s up ?

[@Snowskiracer]

Just a FYI I bought these. I have a 2016 200c and I tried to just pop my old ones out and mine hade these little nuts ok the plastic pegs. So if it do t just pop out I do the bolts out of the under fender which is easy then you can get to the back. It was easy. Hope this helps someone.

[@moderatemods98]

Thank you bro !

[@Kendall-Denko]

Does anyone know exactly what these little things are called. One popped off and went missing would like to buy more. Hopefully at autozone or something.

[@oluna1981]

I wonder if they would fit a Pacifica

[@moderatemods98]

Honestly I wouldn’t doubt it .... these cars are so universal with so many things lol !!

[@__officialyaya]

Yo I installed my front LED side markers a week ago. I’m trying to replace my rear markers cause they weren’t working. I finally installed them in after couple of hours but they didn’t work. Is it plug and play or I have to do additional stuff after installing them in

[@moderatemods98]

YAYA okay so I’m super happy that you got em hope you enjoy em so am I hearing this right bro, is the front working just not the rear ?

[@__officialyaya]

Moderate Mods yup the front ones work just fine, easy plug and play Install. I just Installed the rear ones but they won’t turn on. They installed into the respective positions on the right and on the left but they just won’t turn on

[@moderatemods98]

YAYA okay man so I took a look and on my 200 I literally don’t even have a power cable for my rears it’s just a reflector , you have a cable coming out the rears ?

[@__officialyaya]

Moderate Mods so the rear ones work basically from reflectors only? So there’s no light or nothing?

[@moderatemods98]

YAYA yeah man im my car it’s literally just a red plate kind crescent moon snapped relector lol no power plugs or clips for it

[@mayor2448]

I bought some but how does the new lights stay in the socket without falling out?

[@gregorybyrd4452]

Bought a 4 set on eBay and installed two front lights and they promptly fell out while driving someplace. Lost forever.Wrote the company and they sent me a free front replacement set.My complaint was that they do not supply a locking nut or anything to secure the lights to the fender.I'm still searching auto stores and home depot looking for something to secure the lights with.

[@mayor2448]

@@gregorybyrd4452 thats my exact problem. There is nothing to lock them in. Idk how this wasnt mentioned at all. Ill have to find a way to stick it to the car i guess

[@elmerrodriguez9894]

Does it work on 2017?

[@danielgaribay7191]

Does someone knows if the 300 ones fit in the 200 ?

[@vanzbythemoon1371]

Love your vids man I use all them to help with mods for my whip too but one question, how did you put the stock bulb in the new LED reflector??

[@moderatemods98]

What’s up man ! So there is no bulb in the new one bro , it’s built in LEDs in there ! So just plug it in and your good !

[@vanzbythemoon1371]

My led strip doesnt plug into the original bulb socket I don’t understand?

[@moderatemods98]

@@vanzbythemoon1371 what is causing it not to plug in bro ? Cause it should have the same back end as the bulb like in the video ?

[@hurshelcawvey8654]

When do those lights come on mine do not work??

[@mula_2472]

Do I need a t20 insert bit 1/2?

[@moderatemods98]

I can’t remember exact size bro but torx and 5/16 I used

[@dejesusjordan67]

Where do you plug it into

[@moderatemods98]

It plugs right into the light plug harness of the stock one bro!

[@sebastianpena4556]

Does it work on 2015 Chrysler 200 limited

[@moderatemods98]

Yes!

[@shivabhowmick9440]

How to turn on those side markers?

[@moderatemods98]

They plug it right in !

[@jarvisblack7894]

I want one ☝️

[@moderatemods98]

They look really good !!

[@user-vg5vr2ku7u]

How can I order this to Iraq 😅😢

[@moderatemods98]

Haha what’s up bro ! I don’t know :( is the link not letting you order it ?

[@carljean]

Where the rear ones?

[@moderatemods98]

200s don’t have a power setup back there bro you need to run your own if you want red rear ones !

[@carljean]

@@moderatemods98 I ran the wires already just to find a match for it. The 300 or dodge one doesn’t fit

[@deonthegreat5872]

That does not just pop off with a flat head for me