AIR DRY CLAY | how i make clay pins, necklaces & keychains!✹ TO SELL

Air dry clay pins, necklaces, charms and keychains. How to make them to sell in your online shop. Air dry clay is a wonderful craft medium and here at Red Rocking Bird we have lots of craft projects to inspire you.
Thank you to DAS for sponsoring this video, this is my first video sponsored by DAS and I have been using DAS air dry clay for years as it's my favourite by far, so this is a special one for me. Please subscribe for more: www.youtube.co...
FOX pins: square.link/u/...
FOX necklaces: square.link/u/...
FOX and CAT cutters UK: square.link/u/...
FOX and CAT cutters non UK: square.link/u/...
SHOP: rockingbird.sq...
UK Supplies:
- DAS Air Dry Clay tinyurlcom/yxv5839x
- All other Air Dry Clay Supplies: www.amazon.co....
- UV Resin Supplies letsresin.co.u...
US Supplies:
- DAS Clay - amzn.to/2JKbRTK
- UV Resin Supplies letsresin.com/...
Canada Supplies:
- UV Resin Supplies letsresin.ca/?...
- C O N N E C T W I T H M E -
▶INSTAGRAM: / redrockingbird
▶SHOP: rockingbird.sq... and www.etsy.com/u...
▶SUPPORT ME: ko-fi.com/redr...
#airdryclay #redrockingbird #craftprojects
Some links are affiliate links.
Thank you for watching,
Sarah - Red Rocking Bird
Air Dry Clay, Air drying Clay, AIR DRY CLAY | how i make clay pins, necklaces & keychains!✹ TO SELL

[@RedRockingBird]

What would you make next from air dry clay?

[@ArtsyLadyCrafter]

I need a coffee spoon rest that I plan to design for my little coffee bar. ☕🥄

[@RedRockingBird]

@@ArtsyLadyCrafter that would be wonderful ❤️

[@lisavigus-brown8247]

I'd like to try and make a kitchen paper towel holder. They have become popular

[@RedRockingBird]

@@lisavigus-brown8247 they are aren’t they, it’s not something I really use, I think I’d get a basic wooden one and add to it to make it into something, enjoy 😊

[@beverlywaller8262]

A beautiful wall planter

[@ranakhatibthomas4031]

Is it just me or is her voice as soothing and therapeutic as watching her creative process?

[@RedRockingBird]

happy to hear you think so, thank you 💜

[@suepetty6225]

Yes, it is. I was just thinking her voice is so calming.

[@ExpressionsTheDIYChannel]

Totally agree...so relaxing in every way 😍

[@shelleymac]

I agree, it's always easier to listen when the voice appeals to you.

[@RedRockingBird]

@@GingerNinja007 thank you so much for the lovely comments 🥰

[@VC-tj1kn]

One great tip using UV resin, the brush will last forever….relatively speaking, place the brush in aluminum foil. It protects it even from window light. I always make sure there is a barrier (cardboard tent sideways) between items you don’t want UV to cure until you are ready. Love how you are expanding your business!!!! Well done.

[@RedRockingBird]

Fabulous tip, I will most definitely try this thank you, that will save a lot of effort. I know a lot of people use silicone sticks but I really love the flow and feel of a brush, so a big thank you. The cardboard tent is also a fab tip and I tend to try and put something between the different stages when doing a bit of a production line, fab, have a wonderful weekend ❤

[@jewels64628]

Yes, they will all sell ! They are absolutely adorable,that’s for sure ! I love how you’re never rushed and how you go through the process while you’re doing it and you not only verbalize your actions at every step, you also have so many helpful hint along the way! And if that’s not enough, you openly and honestly share with us your mistakes, what your thinking was, the step that went wrong and what you did to fix it. That, is the definition of a confident, yet humble, honest and talented clay artist and teacher. You have it all ! I love your video’s ! Please keep them coming ! And yes, sell your work and self-made cutters ! Thanks again, Julie Canada

[@RedRockingBird]

Thank you so much for your really kind words Julie, that's made my day 💜 lots more coming soon and the spring/easter one out this weekend: kzbin.info/www/bejne/r6vIfGqlj6ygeMU Have a fab week 💜

[@h6g5f4bv]

I would like to see some of your cookie cutter designs in your shop. (the fox and the mouse on skates especially). I like all your designs. Pat

[@RedRockingBird]

Wonderful, thanks Pat, I've added the foxes here FOX and CAT cutters UK: square.link/u/5fKvo0AN FOX and CAT cutters non UK: square.link/u/jrLyCH8a Thank you for watching, have a lovely weekend

[@shareyah8]

Adorable as always🥰! Do you recommend anything to seal other than resin? I just can't use anything as toxic as resin in my home with my children, but can't find anyone talking about good alternatives. This is holding me back from making and selling designs. Any recommendations would be so greatly appreciated!😊

[@RedRockingBird]

In my first pins video here kzbin.info/www/bejne/h6HSfZukdtt0adk I didn’t use resin but a spray lacquer and water based medium, worth experimenting to see what work for you, I know what you mean with the odours though, I don’t find the UV resin as bad as the varnishes in my opinion, best of luck 😊

[@whiteherondesigns]

I love watching your videos - you explain everything so clearly and I love your calm voice - it's very therapeutic! Thank you for all your ideas and all the various crafts you bring to us too. Lovely pins and jewellery, which I am sure will sell very well! Nicola x

[@RedRockingBird]

Thank you Nicola, your kind words mean a lot to me ☺️🦊🌸 Have a great week 💜

[@rising_waves]

Hello, I have a question. Have you ever experienced with working air dry clay in cold conditions (winter). I live in a farm and one week we had almost -15. Though inside the house it was of course warmer. However my clay did not work well. It was hard. Then I was spraying water and massaging it for long time, but it kept drying out, breaking and cracking. So eventually I just stopped and waiting when it will get warmer. That was Craft Smart clay. Would appreciate your opinion.

[@RedRockingBird]

Hi, when it’s colder out I find the drying time increases, but if yours is drying out with cracks, maybe it’s the central heating that’s contributing to this, best of luck

[@cleonawallace376]

These are lovely! I just came across your channel and now I'm super inspired to get some DAS and get going. I'm just wondering... I've never used UV resin, but the other day, I found an old UV lamp I had for gel nails that I hardly used...could I use that for it? I just put it on FB marketplace to give away, but no one has yet wanted it, so maybe I will just delete it if I can use it to finish DAS projects this professionally!

[@RedRockingBird]

Yes the nail lamp can be used….keep it for sure, enjoy your clay, thanks for watching ☺️

[@pattykelly6621]

Another big advantage of DAS air dry clay is it is much easier to work with if you have issues with your hands, like arthritis. Polymer clay can be difficult with these issues. And for jewelry, the air dry clay is lightweight. I use DAS for making Christmas ornaments for that same reason.

[@RedRockingBird]

Most definitely, a friend was asking the other day what i would recommend for a kids club as she was about to buy polymer clay, but she got air dry clay after I let her know how hard polymer clay can be. Have you tried the DAS wood (here: kzbin.info/www/bejne/ZnfMh3RogLCenrc) it's lighter for jewellery and I hope to make more soon with this ❤ Thank you

[@LindaM1976]

Love them! I’m so glad people are wearing pins again!

[@RedRockingBird]

Yay, definitely 🦊 thank you

[@sherylosullivan9619]

What do I think? They are incredibly cute and I’m sure they will run out the store! Thank you for sharing your skills with us. I look forward to to having a go myself when I get my crafting mojo back. (It seems to have wandered off temporarily.)

[@RedRockingBird]

thank you Shery, the mojo goes sometimes, I have a creativity video that gives a few easy ideas for this : kzbin.info/www/bejne/oKDMfHSnn9ljors

[@mistydawncreates]

I love the little fox. The fox is my granddaughters mascot at school and I've been trying to design something to make pins but i haven't liked anything yet. You did ask the work for me. They're adorable. I'm glad you put it in your shop. I'll order one. I'm curious as to what UV light you use. Mine has recently broke and I'm looking for something others can give a recommendation on. Thank you for sharing. I love the mouse of yours too. Id buy that cutter too if you make one. I think they'd make great Christmas ornaments. ❤❤

[@RedRockingBird]

I love this UV lamp: shorturl.at/fEK49 How wonderful, thank you and enjoy your fox creations 🦊

[@BritKnits]

I think selling them on Etsy is a great idea. I have been successful selling there for the past 20 yrs with my handmade things. I'd love to purchase the cookie cutters you made on your 3D printer?????

[@RedRockingBird]

Super, I have put them on my website, links in video description, to cutters and foxes 🦊☺️ thank you

[@christinastalder4727]

I think they are adorable. Plus I use pipets to apply my UV resin . The smallest ones for jewelry. It gives me more control..❤

[@RedRockingBird]

Great tip, I tried using the plastic pipets that often come with the kits but I found it a little trickier, I think because they were so big, if we can get smaller ones then I should try this thank you and thanks for watching ❤

[@ArtisticInspirations.]

How do you make sure your clay pins etc are consistent in size? Do you use a clay level? What thickness do you recommend? Thanks , Naomi

[@RedRockingBird]

Hi, mine are about 6/7mm and you can use a piece of wood/chopsticks/pencils either side of the clay to roll over to get the desired uniform thickness

[@sylviamacdonald7625]

As always wonderful ideas and simply made. Love &Blessings from Nova Scotia, Canada 🇨🇦 xo

[@RedRockingBird]

Thank you, simplicity is always good, have a wonderful weekend ❤

[@lindamitchell-fox1926]

Hello. Your link for non Uk purchase of the cutters is not currently working. I would love to order them. Let me know Thank you.

[@RedRockingBird]

Hi, thanks, should’ve working now ❤️🦊

[@marieshields5382]

Beautiful,would you recommend a certain brand for the fine detail brush.❤❤

[@RedRockingBird]

Thank you, you can get size 0 00 and 000, I tend to get a pack of them any make that are not expensive and don’t worry if the bristles split and then swap it out, I’ve not felt the make matters too much, thanks

[@beverlywaller8262]

I love watching you make your designs. I’m new to this and really want to get better, but having a little trouble. I want to make a wall planter can you give me some tips

[@RedRockingBird]

Thank you, as a beginner it's best to keep the clay thick so it holds itself better, a video on planters coming soon ❤

[@toriam15]

I love all of your creations but the fox is my favorite!

[@RedRockingBird]

Thank you 😊🦊

[@sallymccornack122]

These were absolutely lovely and I did go onto your shop to buy some cutters but unfortunately you’re out of stock. Hopefully you’ll get some more soon.

[@RedRockingBird]

Back in stock after the first batch sold out straight away: FOX and CAT cutters UK: square.link/u/5fKvo0AN FOX and CAT cutters non UK: square.link/u/jrLyCH8a (sorry to post/mail is £4.20 rest of world) All proceeds go back into videos

[@joanspragg9395]

Hi I am trying to make items for a Christmas Craft fayre that my family want me to attend. I am a card & scrapbooker normally so I am making small scrapbooks to sell. I have made fridge magnets in the past to put on cards but now after watching your channel for so long I am branching out all thanks to you. I have been making Skull keychains with my GrandDaughter who loves watching your videos. She is just 10yrs young and loves crafting with me. Thank you for all the inspiration you are giving us to achieve lots of different projects for our craft day 😁😁😁

[@RedRockingBird]

Hi, this is wonderful to hear Joan and I love that you enjoy crafts with your GrandDaughter too, she has a real treasure in you ❤ best of luck with your Christmas Craft fair, you're definitely getting well prepared ❤

[@carmenlheureux5435]

Of course those pieces fit in your shop! So cute and well made. I’m in love with the kittens ❤

[@RedRockingBird]

Thank you Carmen 😊 ❤ They're cute aren't they, still many ore to make, have a great weekend ❤

[@Midgy21747]

Can you use anthing else instead of resin to gloss and harden these little creatures. Thanks for sharing.

[@RedRockingBird]

Thanks. In my older video making pins I didn't use resin here: kzbin.info/www/bejne/h6HSfZukdtt0adk and these are my videos about varnishing: kzbin.info/www/bejne/m3XSopialJyGidU and kzbin.info/www/bejne/sGHHpZeHe7Zgra8

[@Midgy21747]

Thank you so much for this information. Love your channel. @@RedRockingBird

[@danielaborgo1053]

Hi and thank you for sharing all this stuff with us… I follow you from Italy and I have an issue with my little work… I use natural air dry clay and I paint with acrilyc paints but when I glaze them the paint leaf away like a cuticle sometimes making bubbles on the surface… I don’t understand why 😢 Hope my english is understandable 😅 if not I write it again in italian…

[@AaaaNinja]

I appreciate that you are using PPE I think I would also recommend getting glasses to wear for when your curing light is turned on. Can't be too careful! Of course they're not near the same strength as UV lights used for sterilization or those lights that injured the eyes of Bored Yacht Club party attendees lol.

[@RedRockingBird]

PPE so important yes, of course wear protective glasses if you wish, thanks, happy crafting

[@teraperry1008]

Such cute and fun ideas, and your style is fabulous! You always get me thinking of fun gift ideas!😊✨️✨️✨️✨️✨️

[@RedRockingBird]

Thanks so much 😊 that's wonderful ❤

[@ekaterinapopova1326]

This was very pleasant to listen. Thank you very much for the tips 😌

[@RedRockingBird]

🦊thank you 💛

[@minnasalomaki3177]

I have thought that clay is brittle and does not last in jewellery. 😳

[@RedRockingBird]

Add the resin and it’s strong

[@heatherradford1994]

Absolutely love them especially the fox. Just beautiful as a necklace too. I'm not good at freehand art but may try with stamps and dies to cut around the shape. Have u tried this at all, if not, do u think it could work. I love watching yr vlogs and have tried a few things which turned out lovely 😍

[@RedRockingBird]

Thank you kindly, yes stamps work well too and great fun, glad you enjoy watching, thanks ❤

[@bookwormparade2354]

Your art is truly inspiring, thank you very much for sharing. I've never tried anything with clay, as I fear items would break in shipping, but I'm attending a local fair this Easter, and your creations are so beautiful, I'd like to try too! Thanks again!

[@RedRockingBird]

You can do it, hopefully you will enjoy too, thank you, best of luck ❤

[@ArtsyLadyCrafter]

Your drawings are the sweetest! I like your technique of adding UV resin to the backs to attach the pins. A durable adhesive popular here in the US and used by many jewelry crafters is E6000. TFS!

[@RedRockingBird]

Thank you ❤ I've seen E6000 used a lot, I think it seems the same as UHU as we have here in the UK

[@nikoliniolnc]

I always enjoy your videos the way you talk and the way you respect your art and then you just share your art to us. So thank you. 2️⃣ questions pls if i may?! Thank you; • using coocie cutters first they need to be wet before cutting the clay? • drying in a smooth tile so not to have prints? So u use any rack os something, but it would have prints on it?? Blessed thank you 🇨🇾🇨🇾💚💚🌺🌺

[@RedRockingBird]

You are so welcome, thank you. I don’t wet the cookie cutter, but maybe this could help? Yes I leave to dry on a smooth ceramic tile, anything similar non porous would work, and the turn over part way through drying, pressing down again. Happy crafting

[@nikoliniolnc]

@@RedRockingBird 🇨🇾🇨🇾💚💚🌺🌺🌺❌❌❌❌

[@RedRockingBird]

@@nikoliniolnc ☺️🦊🌸

[@19ROSA63]

How much time do you put in the UV lamp? Thank you

[@RedRockingBird]

Depends on the strength of the lamp but these I have 4-5 mins on each side just to be sure, good to then leave on the windowsill for a little too, thanks

[@laurabuckles7961]

Those are adorable! I'm definitely going to try the UV resin, I think that's a great idea. And of course now I need a 3D printer. 🙂

[@RedRockingBird]

Go for it, thanks for watching 🙂

[@DianasYTChannel]

These are absolutely adorable, Sarah. I love them. ❤️ Thanks for the tip about using UV resin to seal them for strength. 👏🏻😁

[@RedRockingBird]

Glad you like them, thanks Diana ❤

[@lorraine3867]

I love your necklaces and key chains. I love your work fullstop.❤

[@RedRockingBird]

Thank you so much 😊

[@margaretdillinger5090]

Of course they are fit for your shop. I can’t imagine you selling anything but the best work. The cats are absolutely adorable ❤. I really appreciate your videos as you teach us all the best way to get quality products or projects done. Happy Weekend.😊❤

[@RedRockingBird]

Thank you so kind of you as always Margaret 😊 Have a wonderful weekend ❤

[@emovamp-gw6rc]

Thank you for sharing realy enjoyed you video

[@RedRockingBird]

Thank you 😊🦊

[@jubs1533]

Do you have a link to the type of drill you use, please?

[@RedRockingBird]

I use the ones here amzn.to/3jzB9FO scroll down to near the bottom

[@lesleymorgan7948]

I made a whole selection of brooch pins inspired by you. Id love to show you what I made 😊

[@RedRockingBird]

Wonderful, thank you, you can find me on instagram @RedRockingBird if that is any help

[@ismininikolaidou9848]

Πολύ χαριτωμένα! Δουλεύω με πηλό αλλά σε πολύ μεγαλύτερα αντικείμενα. Επιτοίχια ή επιτραπέζια. Κάνετε πολύ ωραία δουλειά. Μπράβο!

[@RedRockingBird]

Thank you kindly 😊 I have some larger pieces coming to the channel soon as I love to sculpt too, wonderful glad you enjoyed, happy creating ❤️

[@robot7759]

The stippeling technique looks almost Aboriginal 😊

[@RedRockingBird]

did you like how they turned out? Thanks for watching ❤

[@serahall4838]

Do you know when the cutters will be back in stock. Can’t wait to try these! xxx

[@RedRockingBird]

Soon hopefully, the first set sold out straight away ☺️🦊💛 thank you

[@RedRockingBird]

Back in stock after the first batch sold out straight away: FOX and CAT cutters UK: square.link/u/5fKvo0AN FOX and CAT cutters non UK: square.link/u/jrLyCH8a (sorry to post/mail is £4.20 rest of world) All proceeds go back into videos

[@poonguzhalibaskaran6393]

Nice work 👌 how long should we keep our art work under UV light?

[@RedRockingBird]

I depends on the brand, usually about 3-5 minutes does it for each section, but all lamps are slightly different, I like to give more just in case, thanks

[@poonguzhalibaskaran6393]

@@RedRockingBird OK dear. Thank you for your valuable reply

[@randyinvancouver]

Those are all very cute. About the metal fasteners and uv resin, unless the base of those pin posts is transparent, you run the risk of the resin not curing because the uv light can’t reach it underneath. Same with the eye hooks. I suggest using superglue for the parts that are embedded or where light can’t penetrate and then resin overtop as you did. Also, you can devote a brush to uv resin and just wrap it in a little foil to keep it out of the light. The resin won’t dry or cure and the brush will always be ready to go.

[@RedRockingBird]

Thank you for your insight. About a year ago I tried adding the pins in this way for the first time and that was also my concern but I never had any issues with it so carried on and so felt confident enough to show on here how I do this, anyone else concerned then yes great idea to super glue the backs on first, leave to dry overnight and then resin over the back of the pin like I did there. If anyone else has any experience of problems adding pins or eyelets in this way please do comment here, we all have lots of tips to offer and it’s great to share and learn from each other. Thank you Randy, have a great weekend 😊

[@RedRockingBird]

Great tips with the foil, I will definitely be trying this thank you 😊

[@marias.594]

She also added a layer of UV resin to the back piece which cures around the pins which will secure them under the lamp.

[@groovybaby7623]

How do you know which resin is correct?

[@RedRockingBird]

@@groovybaby7623 from the links in description I use the clear hard type UV resin

[@janenewley1014]

Please add more cutters to your shop😀

[@RedRockingBird]

Back in stock after the first batch sold out straight away: FOX and CAT cutters UK: square.link/u/5fKvo0AN FOX and CAT cutters non UK: square.link/u/jrLyCH8a (sorry to post/mail is £4.20 rest of world) All proceeds go back into videos

[@loripettit6830]

I throughly enjoy your videos. Your creations are superb! Thank you again for sharing. Blessings ~👩🏻‍🎨

[@RedRockingBird]

Thank you, you are very welcome 🤗

[@JessicaNiles]

These are adorable and your voice is so soothing I was hypnotized. And now I need air dry clay in my life! THANK YOU!

[@RedRockingBird]

As long as that’s a good thing 😂 thank you and WELCOME, lots of air dry clay project ideas and lots more coming soon 😊❤️

[@Red-cw7je]

Hello Sarah, a new subscriber here and I'm absolutely loving your delightful channel. Thank you for sharing your awesome and creative talent with such a pleasing voiceover. Really love your work and looking forward to more.

[@RedRockingBird]

Hi, thank you so much, really lovely to hear, lots to explore on here and lots more coming soon 😊❤️ WELCOME

[@PatriciaNewby-ep3hu]

They are lovely Sarah, and definitely a fine quality to sell. Hares or bunnies maybe as an idea x

[@RedRockingBird]

Thank you, hares and bunnies in the same series would be delightful, have a wonderful weekend ❤

[@rfmh2081]

Which machine is this and for what?

[@RedRockingBird]

This machine: shorturl.at/fEK49 for curing UV resin, used like a varnish but stronger

[@julissimo1]

I really enjoyed this video, the first I’ve seen from you. I subscribed! Love the fox designs and how you painted them.

[@RedRockingBird]

WELCOME, glad you enjoyed, thank you 😊

[@janinedevilliers510]

Wow, stunning, I definately think your pieces are worthy of going into your online store and your printed 3D cutters. This was such a lovely video showing us how to use airdry clay. I always wondered if it cracks. I have a pack but haven't used it yet. Thank you for sharing, it means alot. You are so talented and all your pieces are beautiful. 💖💜

[@RedRockingBird]

Thanks so much 😊that’s lovely, it can crack but is more durable than people think, and even better with the resin and this shorturl.at/fEK49

[@autumnsjournal5352]

I definitely think you should add these to your store 🦊 😊

[@RedRockingBird]

wonderful, thank you for your kindness ❤

[@juliebyerly9412]

Really cute! ❤ I've never used resin. Will these still hold up if you coat with just varnish and use a strong adhesive for the hardware?

[@RedRockingBird]

I've used super glue with success yes, this is how I attached my pins in my first pins video. These as they were to be considered to sell I feel resin is much stronger and allow the clay and the pin back to become one. But yes if you have no resin use a strong glue. Thank you

[@juliebyerly9412]

@@RedRockingBird thank you!😊

[@eulinarego725]

Your dry clay pieces are always lovely and gorgeous! Love them!

[@RedRockingBird]

Thank you so much, glad you like them ❤ have a fab weekend

[@carlachappell6895]

Ok that's beyond me

[@RedRockingBird]

Fair enough

[@victoriac1969]

Absolutely love your tutorials! Thank you for sharing!

[@RedRockingBird]

You are so welcome, thank you for watching ❤ have a great weekend

[@eneGil]

They are absolutelly gorgeous, Do please make sure you have ventilation when using Resin as it damages the lungs. take care and happy creating :)

[@RedRockingBird]

Yes most definitely always with ventilation, thank you ❤️

[@jackiepena1541]

These turned out lovely. You should definitely add them to your store. ❤❤❤

[@RedRockingBird]

Thank you, I will ❤ have a great day

[@ishmom1]

They are all so cute!!!

[@RedRockingBird]

Thank you glad you enjoyed 😊🦊

[@wendystapleton5130]

Beautiful both items made and the video. These delightful little creatures will sell out in your shop. They each hold their own little story have their own voice. Unique no two the same. Look forward to watching more of your beautiful work. Thank you for sharing. ❤❤

[@RedRockingBird]

Thank you Wendy, so lovely of you, some Spring and Easter themed clay coming very soon 😊🌸💜

[@LucyHarrington-Jones]

Love these, and the photos of the fox on the beach, so cheery!! I'm going to have a go, definitely!! 🙂

[@RedRockingBird]

Thanks Lucy…a fox 🦊 on the beach 😜Definitely try making these 😊❤️

[@petakreku6761]

Where do you found the oven?

[@RedRockingBird]

shorturl.at/fEK49 thanks

[@carolynwalker2713]

Love these. Definitely put them in your shop. Thank you so much for sharing your talents with the world.

[@RedRockingBird]

You are so welcome, I will, thanks for watching 🦊💛

[@markusstorzer4545]

I'm glad the algorithm got me here... I enjoy polymer myself but have bought some air dry one to try recently....so I shall try :)

[@RedRockingBird]

WELCOME, hopefully you will love air dry clay too, give a go and see what you think, thanks and happy crafting 🦊

[@AlisonDoenier-zz7xz]

These are adorable, especially the foxes!

[@RedRockingBird]

Thank you 🦊 have a lovely weekend

[@zhanslattery5826]

So many lovely tips !! I'm new to air-dry clay and have so much to learn ! Thank you🎉

[@RedRockingBird]

Glad it was helpful, just get started and have a play, best way to learn, thank you ❤

[@emovamp-gw6rc]

one thing I noticed that I would do differently is : I would use Araldite to stick the metal findings on to or to the inside the clay before using uv resin as the light doesn't go through the metal.

[@RedRockingBird]

Yes if you’re concerned about the internal resin then a strong glue would be better, thank you for adding this, the pieces made in this video and still sealed and fine no problem ❤️🌼🦊

[@diannameyers8163]

Yes, yes and yes 🎉😂❤ love your work and your accent! Beautiful

[@RedRockingBird]

😊 thank you so much ❤

[@charlotted6247]

This was so much fun. I love each one of these. I'd love to try to make a necklace for my little granddaughters. There is no limit to all the animals and things you can make like that. Great video.

[@RedRockingBird]

That's a great idea, thank you for watching and enjoy ❤

[@kerylthomas4996]

I really enjoyed this episode today. You have a soothing voice that lulls me!

[@RedRockingBird]

Oh thank you, happy to hear you enjoyed, have a wonderful weekend ❤️

[@alexisl4158]

So cute! I love these designs. Thank you for sharing. ❤

[@RedRockingBird]

You're very welcome thank you ❤

[@emmasheppard2639]

The foxes are amazing! I have pink hair too 💜💜💜

[@RedRockingBird]

Thank you 💗🌸 amazing 😊

[@jeraldbaxter3532]

Thank you!😊

[@RedRockingBird]

You’re welcome, thank you for watching 🦊❤️

[@emmasheppard2639]

I was going to mention you selling the cutters. I think they'll sell well too xxx

[@RedRockingBird]

Thank you, I will, every time I go to make a batch of something on my 3D printer it goes crazy, this time just needing re levelling I think but this puts me off 🙈 ….technology hey….. which Is why I always love going back to clay and just using my hands 😊❤️

[@RedRockingBird]

fixed the 3D printer: Back in stock after the first batch sold out straight away: FOX and CAT cutters UK: square.link/u/5fKvo0AN FOX and CAT cutters non UK: square.link/u/jrLyCH8a (sorry to post/mail is £4.20 rest of world) All proceeds go back into videos

[@JojosCraftyLove]

Look at you... such an expert without even using thickness guides to roll out your clay! 🤩 Thank you for another wonderful video. I love how the terracotta dried lighter! Also, congratulations on your first DAS sponsored video! 🥳🥳 I have painted my realistic poops (made out of air dry clay, of course!!) and now I just need to "glam" it up. hahahaaha

[@Faith_Chi]

And did you measure them? ;)

[@RedRockingBird]

😜 never one for measuring really, I’d always rather wing it 😂 Yes I love the terracotta too, thank you. 🥳🥳 for DAS How did the poops turns out??? 💜

[@RedRockingBird]

I didn’t??

[@Tracer3]

Super Cute

[@RedRockingBird]

Thank you ☺️

[@MadisonBriggsArtchick]

So cute!

[@RedRockingBird]

Thank you 🦊💛

[@suzannehakim9903]

I like it❤

[@RedRockingBird]

❤️ thank you

[@julieparker6038]

Adorable ❤ Yes they'll sell like hot cakes x

[@RedRockingBird]

Amazing, thank you, ❤ have a lovely weekend

[@carmenzermeno7707]

They are adorable, I would definitely buy these😄👍

[@RedRockingBird]

Thank you 🤗

[@EtherealAngel777]

I love them all🤩your voice is SOOOO SOOOO SOOTHING!!💕

[@RedRockingBird]

too kind, thank you ❤

[@ambikasenthil6101]

❤❤❤❤❤

[@RedRockingBird]

🦊❤️ thanks

[@Cactus-and-Company]

Люблю ваше творчество❤ Вдохновляюсь и творю!

[@RedRockingBird]

это действительно замечательно, спасибо и удачи в творчестве, Sarah

[@Ellie.IsSmart]

I made bear and flower magnets.

[@RedRockingBird]

they sound beautiful, thank you for watching ❤

[@Meadow8792]

I loved this video, very inspiring and helpful. Thank you great work

[@RedRockingBird]

Thank you, have a great week 😊🦊

[@Meadow8792]

@@RedRockingBird you as well!

[@carolinemoore2489]

Awesome quality so relaxing to watch

[@RedRockingBird]

Glad you think so, thank you 😊

[@emovamp-gw6rc]

Yes definitely sell them in your store, they are wonderful! ❤

[@RedRockingBird]

Thank you 😊💜🦊 they’re on

[@iessatuller]

Thank you so much for sharing your talent ❤🫶😻

[@RedRockingBird]

Kind of you thank you 😊

[@joselyndc2206]

They are adorable and perfect for selling

[@RedRockingBird]

Thank you, happy to hear you like them, hope you are having a good weekend 😊

[@jessiewalter3594]

Sarah, first, thank you for all the inspiration you provide! Over the last year I’ve secured many products you have featured, leading to hours of creative fulfillment. I have never attempted resin and wanted to ask a couple more questions about your process. Once you applied the resin to the back of the fox pin and secured the base of the pin via the UV light, what did you use to hold up the fox to be able to apply resin also to the top of it? Also, curious, did you then have to apply anything over the resin, or is the resin essentially the varnish or topcoat? Thank you again.

[@RedRockingBird]

Wonderful Jessie, lovely to hear you are getting such enjoyment from your projects. Thank you for watching. So yes I fully cure the base and then you can poke the pins into some plasticine or cork or something similar to then be able to coast the sides and top fully in resin so there are no gaps and UV lamp again, hope that helps, thanks, Sarah

[@jessiewalter3594]

Perfect! Thank you so much. I look forward to your next video. Take good care.

[@RedRockingBird]

@@jessiewalter3594 😊❤️

[@llusk6375]

So cute! Absolutely put them in your store. 😊❤

[@RedRockingBird]

Thank you 😊🦊❤️

[@louisealjaradat5063]

These are beyond adorable ❤️

[@RedRockingBird]

Thank you, have a great week❤️

[@cherylburkitt9722]

Adorable..i love them ❤️😻😊

[@RedRockingBird]

Thanks Cheryl, they’re great fun to make 🦊😊

[@cynthiawall7073]

Super cute ❤

[@RedRockingBird]

Thank you, have a great weekend ❤

[@ginniedio1860]

So sweet! Thanks for showing them to us! 😍

[@RedRockingBird]

Thank you, you’re very welcome 😊

[@Worthi_Creations]

I love them! So talented!

[@RedRockingBird]

Thank you, kind of you, have a wonderful weekend ❤