Air Lift Performance - AutoPilot V2 - Using the Controller

[@esvinperez7225]

I just installed V2 on my 2011 Honda Civic & I’m pretty satisfied! 🔥

[@TravisBlack]

just installed on my 05 xb. couldn't be happier

[@matthew6905]

lol @1:25 Well i wanna see you do it, thats why im on youtube....AND at @5:20 why does it say stopped/failed?

[@sciyawn]

I noticed on mine I don't have the tank min option only max... whyyyyyy is that lol

[@TomC-kv8pl]

Thank you for the quick response. And your answers were very help full. Thanks again

[@rizocars6115]

i just got my kit for my 2010 accord, i cant wait to install it !!!!

[@iTzUnKnOwNxD]

Where is the next video from this that he talks about at the end?

[@SherrodMustang]

can't wait to get my installed..

[@Subaru411]

Was wondering what the drone noise is from. Is that constant when the air lift is engaged?

[@ThisnThattt]

Long shot since this video is ancient now but I got a v2 kit for my car and preset mode doesn’t work, whenever I go into preset mode and try and select one of them the controller resets itself just turns off and on kind of thing, does the same when I try to calibrate it too, manual mode however works fine

[@ELAZER]

What does the calibrate adjust do?

[@raulmozdzen5541]

Love this setup on my 2013 tiguan

[@bagd99dako]

Will this system work with any air compressor setup? I have a 2014 ram 2500 diesel with full air ride already installed. It has an engine driven air compressor. Thanks.

[@Saphiras_Wolf_Den]

they got everything fixed, thanks

[@exi9164]

I know this is an old video, but i got dust in behind my screen. Anyone know any ways to get it out?

[@xolomiquiztli5951]

Hey i bought a 6y rambler and it came with this airluft system now i lower the car a few months ago and didnt drive it and turn off the airlift system but just a few days ago i tried to raise it up and now my compressor wont turn on

[@ericsalgado3070]

Can I conecte the v2 controller to my 3s management?? Cause can’t sync the app to the manifold

[@jyreece]

Are there different controller options that screens small

[@qazzz3355]

Does anyone has any problems with the compressor not working nor getting any air ?

[@Azewzew]

On mine, I can only adjust the tank maximum, not the minimum. How do I change that

[@edwins2k]

joe slater same issue here, did you ever find a way to fix this?

[@kradios09]

Same problem here

[@poolpo17]

what wire did you guys connect the pink to ?? im having problems with my autopilot v2 saying Comm error, and yes i did call airlift already..

[@islandboypopo]

Is it safe to air out parked on a hill ?

[@brod12313]

WHAT IS TOGGLE MODE AND HOW DO I USE IT???? TY

[@Saphiras_Wolf_Den]

got my kit installed but when i go to use a present is says: NOT TUNED i did the calibration and set all the presets but nothing will work in PRESET mode. only manual mode works. do i need to do another calibration? thanks

[@anthonyfaz6940]

How do I turn on the control?

[@PonteLoco89]

My v2 won't calibrate?? It goes straight to manual mode and this is my replacement part too! Any help??

[@Airliftperformance]

PonteLoco89 Sorry to hear that! If you hit up our support team, they will absolutely get this all sorted: www.airliftperformance.com/support/contact/

[@kradios09]

When adjusting my tank I can only adjust Max pressure, not minimim

[@kallecan]

Got the same problem...

[@esvinperez7225]

Same here

[@choosyonee]

I'm having issues with my system not calibrating

[@ayexace]

To bad they forget to tell you cant use your presets if you got air struts with sleeves bags since they need more pressure to raise I'm stuck using manuel mode have you guys made any updates to the software to fix this issue ??

[@Hold.My.Tacoss]

ace cuzz is it good now ? Did they fix ??

[@liquid9059]

Can't wait

[@GavinJLang]

Mine is stuck at "ecu boot".

[@only88mph]

What does an L mean on the controller?

[@chadhannan]

Did you ever figure this out? I get an L on mine sometimes

[@TomC-kv8pl]

How does it level side to side with the car having different weight from side to side?? I can't make up my mind between the v2 and the accuair e-level. But the hight sensors seem like they would be more accurate side to side. Thank u look forward to your response

[@Airliftperformance]

T C Thanks for the great question! The short answer is the V2 system does not automatically adjust for weight differences side to side. However, if this is a situation that you frequently encounter, we have 8 user programmable presets you can use after determining the pressures necessary to level the ride. Then a level car is just a double click away! Another benefit is the ease of installation of the V2. The wiring is very simple and there is no figuring out height sensor locations etc. And you can always tell how much air is in the tank or the springs because we have those values prominent on the display. Hope that helps!

[@DEEJAYLEGO]

Thanks T C

[@zolphdiggler]

can i upgrade from my manual setup to an auto setup?

[@edsonalvarez7963]

Wondering this lol did you end up doing it ?

[@DEEJAYLEGO]

I live in LA CA any body knows who can install my Air Lift I have a 2014 Subaru wrx sti ?

[@TomC-kv8pl]

Hit up Go-ez they do great work there in Anaheim.

[@ownthispwn]

Brother has this, works great ;p

[@crooksndaniels]

that's the compressor no it isn't constant