Air Ride Install On Our 2018 Subaru STI Type RA - Management First!

[@justinbarnes6833]

Great video as always. I seriously need to quit being lazy and install my kit. This has provided some motivation :)

[@bagriders]

Thanks Justin! Go get started! If you have any issues, or questions, shoot us an email or call! We'd love to help!

[@rudyleon2811]

Been thinking about installing bags for my wrx and by watching this video im very close to pulling the trigger. Best informative video I have watch so far. 👍👍

[@bagriders]

So happy to hear that Rudy! If you have any questions or need any help with a kit let us know!

[@awdspam]

Hyped! Gave me a little more confidence in baggin my subie :)

[@bagriders]

Glad to hear it! If you run into any issues or need any help feel free to reach out to us!

[@karstenheil4026]

you boys put out such fire content you deserve way more attention keep it up

[@bagriders]

Thanks so much Karsten! Means a lot!

[@sliceintoit]

@@bagriders Bless up

[@deerkings]

should have cut the corners off and made wood strips and flush mounted the screw where the spare tire was and that wouldn't been in your way. that's what I did. and then covered the board in speaker carpet and gave it a way better look all though it was all hiding it would have gave it a clean look

[@taylormenezes]

Oh baby!

[@vttperformance9825]

Nice work! 💪 Curious why you add the thicker gauge power and ground wires? If the kit needed it, wouldn’t Air Lift make their harness of a thicker gauge? Or is this because you’re running a more powerful compressor?

[@bagriders]

The OB2 Compressor draws 35A for a single compressor, and the airlift power harness can't handle that so we recommend using the power kit available on our website!

[@808DC2R]

I bought x2 compressors and new harness for the x2 440 compressors can I use that or do u have to run separate power wires like that?

[@frankfluent]

Just pulled the trigger on my kit for the STI

[@bagriders]

We just want to say thank you for the support! Please let us know if you have any questions once you get it.

[@frankfluent]

@@bagriders actually one question! I have stock wheels will the airlift bags rub on them it's a 2017 STI

[@bagriders]

@@frankfluent The stock wheels do come very close to the front bags on a 2017 STI. On our RA we did end up using some. But we always recommend checking clearances between the bag and wheel before test driving.

[@josuecarreno9553]

How does this size tank perform on a daily basis. Does it air up all they way without compressor turning on to refill?

[@bagriders]

This size tank worked great paired with the Air Zenith OB2. The compressor would kick on every second air up to drive height while running 200PSI in the tank. If we were to air up all the way the compressor would kick on.

[@alex.c9524]

New sub enjoyed your content

[@bagriders]

Thanks so much! Excited to have you here!

[@Chris-mp2dw]

I’m planning on buying a kit from you guys. Same car. I just want to know what I need specifically from the website. I plan on running Dual compressors. Do i need the power kit and the upgraded compressor check valves?

[@bagriders]

Hey MisterKrazy! If you are running dual compressors you will need to add the second compressor harness, the upgraded check valve is optional but recommended!

[@Niicky6]

so does the manifold 12v connect right to the battery? if it does it just stays on then?

[@bagriders]

The red power wire connects to the positive terminal of the battery. The pink ignition wire connects to a fuse where when the car is off the system is off and when the car is on the system turns on. We have another video on our channel showing you how to do this!

[@oscartinoco10]

I’m pissed I ordered everything and didn’t receive my air tank and control functions just got my air struts and compressor and I ordered the whole package!

[@bagriders]

Hey Oscar! If you haven't received a part of you order please email [e-mail] and they can look into it for you!

[@Wrx.Saddie]

What was the bolt size/thread pitch for the spare tire tie down?

[@bagriders]

I wish we could remember it's been a while since install.

[@rafaelmendez3314]

No holes where made how did u out the wire for the controller out with out drilling any wholes

[@bagriders]

Most cars have ports/plugs you can use that go through the chassis!

[@tomk5047]

Do you offer installs? I'm lazy and just don't want to do it.

[@bagriders]

We do not offer installations sorry! You can always reach out to shops in your area to see who does air ride installs!

[@messmeister92]

RIP RA lol

[@bagriders]

Just the way we like it :)

[@messmeister92]

@@bagriders to each their own, as long as you guys love it that’s all that really matters.