AIRBRUSH CLEANING - Angel GiraldeZ

❤️👇🏻 AIRBRUSHING for Beginners ✅
• #1 Airbrushing for beg...
🤯👇🏻LEARN more Tricks
www.angelgiraldez.com/en/10-b...
SPONSORS AND PRODUCTS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Ultrasonic machine: amzn.to/2rjCc1t
Wet palette Red grass games / Paleta humeda
www.redgrassgames.com/?...
-Artis Opus brushes : www.artis-opus.com/
- Infinity CR plus airbrush :www.harder-airbrush.eu/en/
-Vallejo colors:acrylicosvallejo.com/
-Yedharo Models: yedharomodels.com/es/
STORES WHERE YOU CAN BUY THE PRODUCTS
If you live in Spain
-Goblin Trader: www.goblintrader.es/
If you live in UK, 5% EXTRA OFF(until end of Nov) on H&S, Artis opus and Vallejo CODE:ANGELG
-Element Games: elementgames.co.uk/
If you live in France, 5% EXTRA OFF(until end of Nov) on airbrushes and equipament CODE:ANGELG
Hobbyshop:hobbyshop.fr/

[@AngelGiraldeZ]

❤️👇🏻 AIRBRUSHING for Beginners ✅ kzbin.info/www/bejne/iH6skGmZqa6efqs 🤯👇🏻LEARN more Tricks www.angelgiraldez.com/en/10-books

[@christiantaylor7422]

I've been airbrushing for 7 years and yet I never fail to pick up a small tip I didn't think of from each of these videos - so good! Thank you! And thanks Tom for the translations :)

[@AngelGiraldeZ]

Christian Taylor Tom is a great guy and his English is beter than my bad accent 😅

[@danaringquist9730]

Little hint for you. When screwing the parts back together first twist the part backwards when you do that you will feel the male thread line up with the female thread. This will prevent cross threading. I'm a Mechanical Designer with 42 years experience so I can say this works.

[@MatteoSpinelli]

thanks for the great video! Just one thing, I thought that the whole point of the H&S airbrush is that you can easily remove the nozzle so that you can pull the needle from the front. Pulling the needle from the back pushes the residual paint into the body, removing it from the front avoids that, making deep cleaning easier.

[@HydroSnips]

Putting the air valve in the ultrasonic gets an epic YIKES from me. A fast track to blowing an air seal Liked the water/mug idea. Never heard anyone advocate dumping a whole load of cleaner into an ultrasonic unless you want to wear the finish off or can burn through cash (most branded cleaners are not cheap to burn through that extravagantly).

[@isisnmagic1812]

Thanks for this video, I got my airbrush two months ago and still learning how to use, this one has added a few new tips to cleaning it going forward thanks and the English helps alot.

[@AndrevwZA]

Cleaning all the parts in the ultrasoninc cleaner is overkill. The parts that does not come into contact with paint, like the handle, airvalve, trigger, waiste, needle chuck and screw and basically everything from the trigger backwards, does not need this treatment. And you only need to do it when you have serious problems. Otherwise a sprayout and a wipe is all you need.

[@vulnerablerummy]

Man, you've finally made it, i remember asking you to make one of these clean up videos on a community post a few months ago. Thanks, yo.

[@AngelGiraldeZ]

Michael Goman yep!! I have a big list😅

[@lisah2442]

Well I just got my airbrush set up for the first time tonight! I am very grateful for your beginner series. I still need lots of practice but these were great videos for referencing!

[@Lumpsack]

Hi, thanks for the vid, very interesting - I'd heard that using the ultrasonic like that can damaged the o rings and surface of the brush - it's been nearly a year now, so how have you find it - is there anything to the ultrasonic being bad or is it fine?

[@user-ue6gb5jt5m]

This is amazing! Incredible Channel! I find a lot of motivation and inspiration here. Thank you so much!

[@AngelGiraldeZ]

thanks, could you share it? it would be great :)

[@Mitchymitch93]

loved the video just wondering how many times can you use the cleaner fluid before you replace it with fresh fluid thanks in advance

[@garoka]

Thank you SO MUCH for doing these translated videos. I really appreciate it!

[@AngelGiraldeZ]

garoka you're welcome, now my videos are in Spanish and English, could you share this video?🙏🏻

[@florianseyboth6687]

Super helpful video, thank you!

[@ruggero2276]

Thanks for this video. May I ask, how do you recover the liquid from the cleaner? Thanks in advance.

[@Wotsit7781]

Great video, thanks Angel

[@cheech381]

can you use methylated spirits in an ultrasonic cleaner and not worry about damaging the airbrush internals parts/seals?

[@sergevicaire2147]

I Angel, great video again!!! Very informative. I am on my way to order my first airbrush!!! Thanks a lot and I am waiting the next one!!!

[@AngelGiraldeZ]

Serge VICAIRE if you use my code:ANGELG in Element Games or Hobbyshop you have 5% EXTRA OFF 😉

[@michaelemu1242]

Great essential Video!!

[@AngelGiraldeZ]

thanks

[@chrissteadman4614]

The long tool that you say is for tightening the golden part of the body is not for that, and will bend and snap if it is. Once the trigger is disassembled, the tool is inserted into the back of the main body and used to unscrew the internal seals so that they can be removed. There is another, shorter, thicker and stronger, tool, for tightening the golden part of the body. HTH.

[@AngelGiraldeZ]

ohhh, thanks

[@cheech381]

Hi, where can I find that nozzle cleaner tool from? It has a nice chiselled point.

[@ikkiiiieee]

When you are cleaning it at 3:40, can't you just pull back the trigger instead of pulling the needle back manually and get the same result? Great video's, love them

[@adof7257]

how about cleaning while changing primers instead of ordinary paints (from black to white for example) or after varnishing and beginning to work on something else

[@nokturnal_]

Thanks for videos. I think that you forgot one thing to mention. What about airbrush maintenance after cleaning, eg. when there are problems with smooth needle movement or a trigger? Do you use something like Iwata Lube, Badger Regdab or totally something different? Maybe there are other alternatives...

[@henry-yu2ju]

Do you use heat for the ultrasonic cleaner

[@robotm8105]

Can I put nozzle in the ultrasonic cleaner too? Won't it be damaged??

[@brianschoner3350]

This is great - muchos gracias! Can you tell us where to find the tool you used to clean the nozzle starting around 4:02, or at least what it is called?

[@AngelGiraldeZ]

thanks, could you share it? here you can buy the tool, you can use my code:ANGELG elementgames.co.uk/paints-hobby-and-scenery/Airbrushes-accessories/service-kit-for-infinity-evolution-grafo-and-ultra2

[@ImhotepsServant14]

I always worry that I’m not cleaning my airbrush right so this is perfect

[@byLemon12]

Hey Angel, thanks for the fantastic video as always! Absolutely love your channel. I'm curious, with the ultrasonic cleaner, would it be okay to leave the airbrush in it for a day or two and then assemble it prior to the next time you start painting?

[@AngelGiraldeZ]

thanks, it's not necessary, you only need 3-5 minutes :)

[@PostHuman80]

Where did you get the nozzle cleaner? The smallest one I can find is only good for 0.2mm and larger nozzle (harder steenbeck). There are some great tips here, thanks!

[@AngelGiraldeZ]

5% EXTRA OFF code:ANGELG . elementgames.co.uk/Airbrushes-accessories/harder-and-steenbeck/cult-of-paint/service-kit-for-infinity-evolution-grafo-and-ultra2

[@kevin_howell]

No need to remove the needle seal for the ultrasonic cleaner?

[@RaffaeleDuMarteau]

Love it ;)

[@AngelGiraldeZ]

Thanks fratello :)

[@jasonowen8192]

I live in the US and I have the infinity cr plus. What is the name of the tool that you use to clean out the nozzle? I would like to get one. Keep up the good work and please stay safe!

[@kevbee8325]

It’s part of the Harder & Steenbeck Airbrush Service Kit which in the UK costs around £25 - £30 (approximately $40).

[@TheHabanaCustom]

Thanks a lot for the translated videos!!! Now I can concentrate on the things you do and not to read the subtitles 😅 Can you please tell me, where you get the cleaningneedle from? I've got 2 or 3 now and they're good for the 0,4 mm nozzle, but to big for the 0,15 mm nozzle.

[@AngelGiraldeZ]

Meik P If you use the code: ANGELG you have a 5% extra off 😉 elementgames.co.uk/Airbrushes-accessories/harder-and-steenbeck/cult-of-paint/service-kit-for-infinity-evolution-grafo-and-ultra2

[@DrLangas]

This was a really helpful video, thanks. I was hoping your rabbit would feature in it haha

[@c-r]

I've been trying to release my needle nut but am having problems Once covid is over I can probably go to a bar or something

[@JonBringer]

Hello again, I was wondering do you have to use 100% of the cleaner or can you mix it was water? (Vallejo cleaner is pricey) ☺️

[@AngelGiraldeZ]

yep!!, you can mix 30% water :)

[@markdevries3600]

Great video I was wondering do you every worry about not spraying in a spray booth and breathing in paint?

[@AngelGiraldeZ]

if you paint miniatures, it's not necessary, many artists and illustrators use the airbrushes and they don't paint in spray booth, but if you paint cars, big models,etc.. and you use toxic paints, you must use a mask and in a spray booth :)

[@tusumi]

I ordered an Infinity 2 in 1 but it's not CR plus. Is it good enough or should I return it and order one that is CR plus? Dose it matter? I'm only going to use acrylics with it.

[@AngelGiraldeZ]

Don't worry!, both airbrushes are good🙌🏻

[@tusumi]

@@AngelGiraldeZ Thank you!

[@tusumi]

@@AngelGiraldeZ I now got the airbrush and I have tried it. It is a bit weird because I can't use the quick fix at all. I have to press the lever almost all the way back for any paint to come out. I'm thinning my paints of course and running my compressor at around 1.7 bars. Even at max settings at 6 on the quick fix no paint will come out. I'm I doing anything wrong?

[@waylowsworkshop]

where can i get the nozzle cleaning tool you used in this video at 4:43? great video :)

[@AngelGiraldeZ]

Waylow's Workshop 5% extra off with the code:ANGELG elementgames.co.uk/Airbrushes-accessories/harder-and-steenbeck/cult-of-paint/service-kit-for-infinity-evolution-grafo-and-ultra2

[@massimowenk1324]

Can you use normal dish soap water instead of the cleaner in the ultra sonic chamber?

[@AngelGiraldeZ]

good question, if you use dish soap water in the ultra sonic, you will get a lot lather 😅"lather party"

[@massimowenk1324]

@@AngelGiraldeZ ah sure XD but it wouldn't hurt the Airbrush?

[@Steve-dr7rr]

Hi where do you get your ultrasound cleaner from

[@AngelGiraldeZ]

here :) amzn.to/2rjCc1t

[@parnashwind]

What is the advantage of moving the needle like that as opposed to just moving the trigger back and fourth to move the needle?

[@pavelpavlov72]

I think the tip of the needle comes out entirely from nozzle when you will move it with hand. If you are using trigger you can't making the same.

[@parnashwind]

@@pavelpavlov72 I suppose that is one reason.

[@pitoe]

jajajajaja me encanta el doblaje!!! he puesto por error el vídeo en inglés en lugar del vídeo en español.... GRANDE!!!

[@AngelGiraldeZ]

pitoe xdd

[@arsenmarek597]

Thanks for the video, there is a funny guy in the top left making cryptic eyebrows movement ;)

[@AngelGiraldeZ]

Arsen Marek 🤣🤣

[@Mcgreag]

300 sec = 5 min not 3 :) Anyway I once read that you should not put the air valve in the ultrasonic cleaner as you could get bobbles in it that could damage it. No idea how true this is, anyone who knows?

[@nicholasw777]

I was promised a bunny, where is THA BUNNAY?!

[@AngelGiraldeZ]

Nick W on my Instagram🤣

[@pavelpavlov72]

It is a great method, but i'm afraid, wouldn't we see soon many comments from the people who brokes his nozzles with the moving needle? )))

[@AngelGiraldeZ]

really? I use this method during years and I never broke a needle 😅

[@pavelpavlov72]

@@AngelGiraldeZ I don't know ))) Actually, I don't know how hard the nozzle tip is. Once I dropped it to the wood floor and saw 0-shape instead o-shape on the nozzle's tip ))) And I forced to need to buy new nozzle

[@Scarhandpainting]

Nozzle is not that delicate. Personally I go hardcore on the same Infinity airbrush Angel uses with a similar technique and I've damaged a single nozzle throughout last seven years and only because I used the cleaning tool too hard.

[@Scarhandpainting]

Bro, if you pull the needle out backwards you pull all the paint residue into your airbrush. Consider taking off the nozzle first, then pulling the needle out up front.

[@AngelGiraldeZ]

first I clean the airbrush with water so I don't have that problem :)