Hopefully, they may a coastal command soon. Can’t wait to get my hands on it
@daveswindell90444 ай бұрын
Thanks for the preview Spencer. Re the nose weight, check parked up B-24's, it wasn't unusual to see oil drums/ammo boxes etc wedged under the rear fuselage bumper - it was a bit of a tail sitter IRL!
@stevenbudd37254 ай бұрын
Hi Spence. The rear turret clear parts Z6 and Z7 were easy to mask off with Parafilm M and a new scalpel blade loaded as it happened. No caffeine for 24 hours prior and no sex during the masking itself is particularly important to mention too. I guess most folks though will park theirs for kabuki pre-cuts to appear but Parafilm M worked seamlessly throughout on mine. As far as weight goes, the solution that would skin the tail sitter issue easily is to have white metal copies of the bomb aimer's floor F5 and the .50 cal feed boxes, chutes and nose turret mounting disc F6. I made a false bulkhead tub behind the IP (it's invisible in the finished model) and loaded it and A21 to the gunnels with lead shot and it jointly came to 30 grams - 25grams short. The boarding ladder is made slightly overlong by Airfix to prop up the back end - I notice the Airfix builds on their web site both have the ladder in play which may or may not indicate a weight shortfall. Painted and finished white metal copies of the parts I mentioned would be indistinguishable in finished models and would certainly tip the balance (see what I did there)... Anyway, as a plastic test pilot, I always much look forward to seeing everyones production kits being subsequently nailed together, their opinions and experiences and so on. Happily they're already queueing up on You Tube and else where, so happy days! Wish you well with yours. 🙂
@williamreece8804 ай бұрын
Outstanding Airfix. A proper B-24H. Loads of variants on the horizon. USAAFD & J, RAF and Coastal Command Liberator III, V etc. This looks to be better than the 2007/08 Hasegawa kits. Well done Airfix! Good episode Spencer!
@jimaltergott93264 ай бұрын
Airfix does it again! This one is really tempting me to buy yet another model to add to my stash 😂 I've always been a champion of the B-24. Like the Hurricane to the Spitfire, B-24 has always been the poorer relation to the B-17. However, it served on all fronts and in different roles. Just never got the press as the B-17 did. Sorry for going on so long, thanks for posting.
@MrWhitey82514 ай бұрын
It appears all the turrets can be installed after painting. Great design.
@rebelsatcloudnine4 ай бұрын
I've built the Airfix B-25, and B-17G, and I'm so excited they've built a B-24 to add to this collection. Thanks for the review, I can't wait to get one of these for myself :)
@2-Hands4 ай бұрын
Got one on Pre-Order here in the States and looking forward to this kit that I am building for a local Museum in my area.
@markbailey35084 ай бұрын
This is a fantastic kit. Received mine yesterday gave it a quick look over, really like the quality and in a dark styrene ❤❤❤❤
@stephenlovelock55634 ай бұрын
Nice one mate,good video on such a good bomber,well done mate and well done Airfix.
@MX5Fanatic4 ай бұрын
I noticed that Airfix having taken a great idea from Bandai by the way the sprues letters are clearly labeled. I am so glad you are finding time to do videos. I missed you. ❤
@SMAZVidoes4 ай бұрын
Looks great. On my 2024 build list for sure.
@caffloss4 ай бұрын
Got mine in the post today from Airfix, What a brilliant kit it is
@AnthonyBrown123244 ай бұрын
Nice to see better packaging and even more important better plastic!
@AJ-hm5ck4 ай бұрын
Nice job Spencer! I also agree.... the B-24 looks a little ungainly sitting on the ground, but in the air she is a beauty ....
@ebbergman4 ай бұрын
Finaly! I have been waiting for you to do this!
@lesthiele49214 ай бұрын
Hi Spencer that was a excellent going over of the B-24, I have always thought it was a nice aircraft, just big and solid, I have now subscribed to your channel, best regards from a Kiwi living in Australia, Les
@onecheesey4 ай бұрын
On order & arriving next week. Looking forward to this 👍👍😎😎
@AAbshier4 ай бұрын
At 13:21: one thing I do on my models is stick down the upper half of the wing to a sheet of glass using double-stick tape, then cement the other half in place. Let the glue set, then remove from the glass. That ensures the flat and straight wing that is needed. Before taking up that method I had a few "banana" wings that were a beeyotch to straighten out.
@EricIrl4 ай бұрын
Oooh - can't wait for the box opening.
@Mortlaker4 ай бұрын
I love your style of outboxing. No gloves or re-bagging. Just get in there. Thank you.
@howardkilburn20244 ай бұрын
Really good that Airfix do a wheels up choice for some of their models, including this B24...personally I think it looks much better in flight than on the ground
@willwoods64664 ай бұрын
Great looking kit. I'll be checking my regular stores for availability here in the Wild West Prairie of Canada!
@themajesticmagnificent3864 ай бұрын
Great review of this kit..Airfix are improving all the time and that’s good to see..Not normally a 1/72 builder..But saying that I’ve got all the V-bombers and two B-29’s in 1/72..This B-24 does interest me a lot..Does Airfix give you the choice to build it wheels up for us who wish have them inflight..Thanks again for a great video and all the best👍
@Jeff-cv4qn4 ай бұрын
Looks like a great kit
@alvinsmith53464 ай бұрын
interesting idea to mold the guns with the clear parts! Never seen that before.
@NigelsModellingBench4 ай бұрын
I bloody love your videos Spencer. Keep em coming buddy... I wonder what the third kit was??
@jachmastr4 ай бұрын
Dont hold your breath on the markings Spencer I have just completed two sheets for Xtradecal with lots of interesting options within ;)
@stuarthanna24174 ай бұрын
And the nose & tail turrets are not in halves. No seam across the clear tops.🤗
@richardgraham45124 ай бұрын
This kit was only announced on 9th Jan as part of the Airfix 2024 programme. So kudos to Airfix for getting the kit to market so soon after announcing it. Great first look.
@richmacer21084 ай бұрын
Kit looks really nice. No aircrew though.
@robbwatson20884 ай бұрын
The guns moulded into the glass looks daunting. Great looking kit though.
@thekinksfan51024 ай бұрын
Does it mean that just 25 grams will keep the front wheel on the ground? Hasegawa needs 90g.
@rcrawford424 ай бұрын
Already have the decals to make "Nine Yanks and a Jerk". Not quite the right model, but close enough for me.
@ronaldbyrne33204 ай бұрын
It would show up smack in the middle of an expense filled month. 😢 Definitely going to build one, but I’ll have to wait awhile longer before adding this to the stash.
@collintatusko41554 ай бұрын
Looks great. A must buy. Can she be built gear up?
@collintatusko41554 ай бұрын
Saw another build review, and answered my own question. Yes she can be build gear up…thanks Airfix. Now please kit a 1/32 F6F Hellcat!!
@Mike-mm4mx4 ай бұрын
The Liberator Davis wing is possibly one of the most beautiful aviation wings ever designed. However, when it came to the tail planes it looks like the designers had used up all their inspiration! Looks like Dumbo's ears! A nice looking kit much better plastic by the looks than the horrible soft stuff they were using. Not one on my wish list simply as not enough room and have already built the Hasegawa one.
@localbod4 ай бұрын
Presumably 'gills' are cowl flaps. Interesting.
@stevenpiper9704 ай бұрын
No Ford window on that nose?
@DaraM734 ай бұрын
No pilots or crew?
@user-du6yr1qx5d4 ай бұрын
Мечта...а не модель...в России больше 100 $ стоит.😢