Airfloss Stuck Fix

I tried to push a button but no water. I twisted and pulled a airfloss body for open and removed a metal plate. Something inside silicone tube and i push and squeeze it and it gone.

[@hankus253]

On mine I found a similar problem, but it was on the opposite side between the black gear and it's metal cover. There is a tiny super magnet glued into a pocket on the upper side of that black gear. If the glue fails the magnet moves and attaches itself to the metal cover. Remove the metal cover and reset the magnet in its pocket and secure with a drop or two of super glue. You may have to scrape the pocket to remove the old glue before the magnet sits low enough. Make sure after reassembly that this magnet doesn't touch the metal cover.

[@silvioelias1408]

Foi útil..meu quebrou mangueira

[@cherrypeachsoda]

How do you even remove the cover to get to the insides?

[@helgap3218]

pull the top and bottom in different directions. if it didn't work then pull harder

[@user2901]

How do you remove the white wheel, to get to the metal plate?

[@hankus253]

There is a small phillips screw that holds that white wheel in place. Its inside the white wheels center shaft/hole.

[@andreaskuhlmann3765]

Show please how to Open !

[@helgap3218]

pull the top and bottom in different directions. if it didn't work then pull harder