Airsoft - High Speed Gears vs. Standard Gears

[@bukIau]

After about a year of owning my arp 556 2.0, I decided to step foot into upgrading its components. Before I mess with the gearbox, I went with other easier upgrades and now I’m stepping foot into the gearbox. This video helped me understand gears in general and their function. Thank you for making it simple for me to understand. I liked that you demonstrated with the drill in the beginning when explaining the 18:1 gears.

[@benhadaway3322]

I love that your videos. Showing actual data rather than just opinions or videos of you just shooting the gun. Fantastic work with science! Keep it up!

[@3dbarn547]

This has to be the best airsoft video I have ever watched

[@justinbrat]

When people "beat them like a red headed stepchild!"!!😂😂😂

[@erumc5839]

This is one of the best technical videos of airsoft! youre amazing! doing test stuf that drill improve was amaizing! to see how 18:1 works! regards from mexico!

[@DudaZachary]

If you are having desoldering issues switch to an xt60,handles heat much easier since it uses solder cups in stead of tabs like a deans. They are also rated for higher amps.

[@leonardbacks4008]

your knowledge is amazing, you sound and look like a professional. thank you for all great video's, sir..

[@miguelalmeida935]

finally a video that explains exactly what is needed!

[@tryhardairsoft416]

I am still using the same SHS 32:1 gearset I got in 2019. Running slow cycle has reduced stress on my other parts like the motor, MOSFET and battery. I think I am running 32:1 forever for my personal units.

[@goobert8921]

If you're running anything other than a DMR, and you're concerned about excess motor heat, id suggest stepping back down to 18:1 but looking into getting a brushless motor, like one from Warhead Industries. They're a little pricey, but they're absolutely worth it

[@bertcoenen9413]

Thanks for the clear explanation, very helpfull for a beginner

[@nathanhinkle1329]

You sir are a hidden gem

[@invsdaniel]

Do I need to upgrade the bearings or swap out the gear pads (re-shim)? I am new to airsoft and I've seen a lot of people talking about this online. Can I just buy a set of 13:1 gears, drop them in and be done with it?

[@slipyPR]

wow man thanks for the videos, you are great explaining everything.

[@McDamianWalnut]

Well explained with experiments and data is very useful. Thanks!

[@AMK292]

Great stuff been looking for this info cant find it anywhere else

[@GhostStalkerActual]

DOG'S break because in order to get a decent fps out of them you need an m170+ spring. The velocity of a heavy spring is faster than a standard spring( that's why you also need a heavy tappet spring) moving that fast and strong cracks gearboxes

[@icescreamgaming953]

What's DOG?

[@BloodxSoulZ]

i guess he ment DSG's @@icescreamgaming953

[@ElDuque-zw2sg]

This info was awesome, thank you

[@MaxRodriguez-w5n]

Very helpful thank you very much

[@twinshorts4088]

Brilliant video. Earned yourself another subscriber

[@pyroromancer]

im not an airsoft tech but im a bicyle tech. Wouldnt the cardul application of grease greatly reduce the wear on abusive use?

[@GoDjangoAirsoft]

Thanks for testing

[@TheGutshotpro]

This is excellent, thank you.

[@penjjd_0459]

Thank you for sharing knowledge,next video please aluminum piston head vs nylon piston head what is differences?

[@y_zombie8571]

Muchas gracias por este vídeo, es perfecto!!!! 💯❤

[@fserafeimgr]

I'd love to see you, making tha same test, are testing the 13:1 with both motors, but by upgrading to deans connectors.. What impact might that have in performance 😉

[@mattipanduro8583]

I did that with a 16 RPS gun and it jumped to 18

[@airsoftfantom]

great video, thank You

[@ГеоргиХристов-н9в]

Great video! I was just wondering what would be the difference if I get a higher rpm motor with an 18:1 gears in terms of less stress on the overall system?

[@darylobey8867]

That does help I like useing g&g 25k big difference over the 18k stock motor or 25k tom30 mybe 35k will be a big difference and you'll notice it in semi and full auto on howmlacking an 18k is vs how smoth and quick a 25k is with stock gears

[@ГеоргиХристов-н9в]

I just guess the higher rpm motor needs a bit more time to spool, right?

[@darylobey8867]

@@ГеоргиХристов-н9в not realy youl notice a huge differnce when you go from stock 18k to 25k-35k motors quicker responce even in semi auto i use 25k g&g in my toptech 416 with 18/1- gears and its quick withna perun v2 hybrid

[@mtmt6226]

Thank u sir this video is very educational

[@rommeltolentino942]

HELLO TO ALL. WHAT IS BEST BETWEEN THIS TWO GEARS FOR 170 GUARDER SPRING? 32:1 OR 200:100 Gears? In my country 600+fps are more often use. Need your help guya.

[@sudeki2007stalin]

Best guyde on youtube!

[@senpuuxd1032]

I always use 13:1 with modify mpi 22t with perun/gate mosfet on 1.35j or 1.9j

[@arturopratchacon106]

YOU ARE AWESOME!❤

[@879blank]

Thanks for all your hard work ❤

[@joash480]

helpful

[@jehsranching]

You should probably start short stroking with that high of a gear ratio and motor

[@ericsiraton5573]

What a good store to buy airsoft components?

[@joejoeseesingtons]

Good info

[@Rell6000]

Nice video.

[@ChazinFl1]

Nice info!!

[@ForganMreeman-0]

do you have any information about 16:1 Gear RPM / RPS ?

[@snixonxd3209]

Did you use a high torque motor or high speed motor

[@ShetlandTec]

Is not a good idea to use a m100 spring with a high rpm/high speed setup with a 11.1v lipo, it will give you over cycling and premature wear on the piston and gears.

[@grimlock2727]

but what if I want to upgrate to a M120 spring? what gear ratio do i need for higher power?

[@Mike...p]

@16:45 ... FPS? I think it was supposed to be RPM.

[@miasresma5773]

In test 3 sir, is it possible to use spring 135?

[@nicksenkovs1525]

Early on in the video he mentions that this won't alter FPS, then at 16:45 in the video he said; "from 1,000 FPS to 2,000FPS". Wow that's an amazing FPS gain from a motor & gear set change!!!

[@albatron9410]

how many joule?

[@Rami.Rami0]

Is 100:300 good?

[@magkanotv3808]

How many fps?

[@nudarmawan]

How many teeth on your piston?

[@MorbiousTactical]

I want to see more on torque builds. Hight torque motors with 32:1 gears.

[@billmaragos2812]

32:1 gears are going to drop the speed in rate of fire, since the motor would need to rotate 32 times instead of the standard 18, or the upgraded 12 or 13 like on this video. However, higher ratios (like 32:1) allow for harder springs to be pulled more easily, even by not so torqey motors. So for say an LMG where you need both higher fps than standard Assault rifles, and a high rate of fire, you would be well off with a higher ratio and a motor that is rather fast than torqey. On the other hand, there are brushless motors (e.g. Warhead Industries) that offer both high torque and high speeds, so by using that you would not need such a very high ratio like 32:1 to pull the harder (say 400fps@.2g) spring.

[@Vesper-]

32:1 gear ratio with a high torque motor, I think that in order to make use of such setup you'd need to have a spring so strong it would probably crack the gearbox in half lmao

[@ericunderwood5532]

what mosfet was used on this aeg

[@thekidlacroix]

looks like the stock G&G ETU 2.0

[@ldsinspiration5481]

Anong size Ng oring

[@SethHolt2]

Does 13.1 gears affect fps?

[@McDamianWalnut]

15:37

[@winslettfam]

Polar star is expensive!

[@Speedycorgidad]

My question for you is what kind of range are you get in the difference of gear ratios?

[@porkpie2965]

Range is influenced by the hop, hop rubber, inner barrel and spring.

[@bruh4569]

And by sealing​@@porkpie2965

[@joshuahockman1128]

You motor is really whiney I would recommend resetting the motor height if that doesn't work you may need a higher torque motor than what's in that lancer.

[@mr.fahrenheit8150]

For high fps build, what gears is recommended? Thank U

[@SpeedSim_]

higher ratio ones like 20:1 are what most people use

[@mr.fahrenheit8150]

​@@SpeedSim_ 22:1 & sp150 is good? Thank U

[@carl_c]

or just buy a polarstar 🤷

[@ahhhh12983]

this is cheaper to do tho

[@noscoperz2083]

And fuck the hpa tube, only use it for my m249 lmg

[@Raz_Tactical]

hPa does not make sense to me. It's expensive to build, you gotta deal with the bottle and hose which looks stupid and also it's another cost every time you want to play to refill the bottle. Never mind having to find a place that will refill them. In comparison a new gears and some shims will cost less than a bottle for hPa setup with performance being similar. Airsoft guns already shoot faster than their real steel counterparts so there's no need for higher rps which really is the only benefit of hpa over AEG and even then a DSG build can achieve similar with less cost.

[@DudaZachary]

Been playing airsoft for around 15 years. Polarstar is great. But not having to lug around a tank as you get older and get the same results is really great.

[@Raz_Tactical]

@@DudaZachary the few times I shoot hPa i thought "yeah that's kinda cool" but nothing more, didn't feel like I would have advantage over my AEG or at least not enough to justify the extra cost and effort and definitely did not feel like it had advantage over any of my dsg builds