DIY micro camper | Full Build Timelapse in under 10 Minutes

Trailer Blueprints available on the website!
www.adv4x4.us
Detailed Trailer Build Series linked below
Cost breakdown video
👇🏻👇🏻
• Micro Camper Build | H...
Part 1
👇🏼
• Micro Camper Overland ...
Part 2
👇🏼👇🏼
• Micro Camper Overland ...
Part 3
👇🏼👇🏼👇🏼
• Micro Camper Overland ...
Part 4
👇🏼👇🏼👇🏼👇🏼
• Micro Camper Overland ...
Part 5
👇🏼👇🏼👇🏼👇🏼👇🏼
• Micro Camper Overland ...
Part 6
👇🏻👇🏻👇🏻👇🏻👇🏻👇🏻
• Micro Camper Overland ...
You can find me on Instagram here
👇🏼👇🏼
adv.4x4?r=nametag
‼️Complete Parts List‼️
Some of these are affiliate links so by using them to purchase Items I get a very small commision at NO EXTRA COST TO YOU Its a great way to suppprt the channel!
Metal Supplier
bmgmetals.com/
Timbren Suspension Used
www.etrailer.com/Trailer-Axle...
Aluminum Composite Paneling
www.piedmontplastics.com/?gcl...
Aluminum Trim Part# HT11-02
www.teardroptrailerparts.com/...
Fenders Part# FN04
www.teardroptrailerparts.com/...
Door Part # FC14
www.teardroptrailerparts.com/...
Window Part # WDRV2420
www.teardroptrailerparts.com/...
Vent Fan Part # FAN20
www.teardroptrailerparts.com/...
Toyota Bolt pattern Hubs
amzn.to/3P4Hape
Lugnuts fto run Toyota wheels
amzn.to/3MOLgjo
Welder
amzn.to/3sgxCOg
Digital Level
amzn.to/3wbTmMb
Craftsman Restorer (to clean Millscale)
amzn.to/3yhdz61
Wheel for Craftsman Restorer
amzn.to/3KR1E1d
Steel-It weldable Paint
amzn.to/3LZl1Xp
Gussets
amzn.to/3LSE4CL
Rear Hitch
amzn.to/38h063k
Tabs to mount moto carrier
amzn.to/3ympYWq
Removable tongue jack
amzn.to/3vOE1Cm
Tap magic
amzn.to/3FxfqW0
Primer
amzn.to/3sKmFEV
Raptor Liner Kit
amzn.to/3wBTBln
Taillights
amzn.to/3wyXk1L
Marker Lights
amzn.to/3Mx04Dr
Wiring Harness
amzn.to/3NqdKjS
7 Pin Harness with Junction Box
amzn.to/3woAECl
VHB Tape
amzn.to/3mZAWKl
SikaFlex 221
amzn.to/3O4q0qS
135° Aluminum angle
www.outwater.com/products/zz-...
Fastener for tongue and groove
amzn.to/3zdE2BC
Rivnut tool
amzn.to/3uVtS60
Sleeved Wire
amzn.to/3BNWYse
Heat shrink connectors
amzn.to/3d63ekN
Circuit Breaker
amzn.to/3zFt6vm
Dimmer Switch
amzn.to/3SAoKi2
8 Guage wire
amzn.to/3BIEOrJ
Coat hooks
amzn.to/3p1eTE6
Copper wire Lugs
amzn.to/3JBtIa2
Folding cup holders
amzn.to/3Quipml
Shelf brackets
amzn.to/3Quipml
Ceiling lights
amzn.to/3dfo4OV
Battery Bank
amzn.to/3zzWX8B
Cigerette lighter plug
amzn.to/3P5cQcI
#microcamper #overland #diy #timelapse #teardropcamper

[@Adv4x4]

Thanks for watching guys! Don’t forget to subscribe! If you wanna see a cost breakdown of the build click here! 👇🏻👇🏻 kzbin.info/www/bejne/bXLZeYJ5pK6cbq8 You can find the trailer blueprints here 👇🏻👇🏻 www.adv4x4.us All of the detailed build videos of this camper are linked in the description!

[@user-gt5rr1fb6b]

''

[@Schoeler1989]

My back hurts from watching this. :) . Nice build though.

[@Adv4x4]

You think your back hurts imagine mine 🤣

[@wickedways1291]

Brilliant and beautiful. Any idea of the total cost?

[@jimmbrooks]

hard to throw out those old Nike socks huh

[@Funky245]

honestly really impressed that he completed this build in under 10 minutes

[@Adv4x4]

😂😂😂

[@AyeshaKhan-uj7jv]

Hahaha

[@SaabAholic]

Would have taken me at least 20 minutes…..😂

[@Adv4x4]

If you watch close you can watch the seasons change in this video 😂😂 gives you an idea on how long it took

[@promiscuouscrab4040]

I put it on 2x speed and he completed it in under 5 min! O_o

[@Montana_Outdoor_Adventures]

If you do add solar, may I suggest you mount a panel or two (preferably two if there is room) on the roof, then adapt the wiring to XT60 this way you can plug directly into the EcoFlow with no charge controller etc. This will give you a lot more capacity for the E.F. River and give you a bit of time in the field camping to figure out your total electrical needs. Then you can design your LiFePO4 battery pack/charge controller based on your actual, field tested needs. This trailer turned out so good, I cannot wait for your fist weekend camping video!!! Thank you for taking us along during the build!!!

[@Adv4x4]

Thanks for the advice Charlie!! Also thanks for watching! We have taken it camping a few times already but no cameras were rolling haha. I will make a camp video in the future though!!

[@harrymills2770]

Panels are so easy to set up, and maybe you don't want to park in the direct sun. You're out in the sun on the road, but anything you have on your roof is blocking the sun, so maybe just start packing panels.

[@jviewerm]

Agree with roof mount. My build has a roof top tent and only had "floor space" for one panel. So I mounted one fixed but mounted drawer slides on the uprights holding it. Then mounted a second so it would slide out when we are in camp for 200w when stationary. Great way to save roof space for cargo (bike mounts eg) but still maximize solar when camped.

[@Montana_Outdoor_Adventures]

@@jviewerm Thats a great idea, quick to set up and quick to stow!!!

[@MikeLagasse]

The way this project was shot+edited made me feel way more invested in every step than is typical for youtube camper builds, great job!

[@oggyoggy1299]

Lame

[@Adv4x4]

Thanks Mike!!

[@EasyGecko]

@@oggyoggy1299no room to talk bro

[@joeromano5607]

One of the best minimalist overland builds I have seen thus far. Very nice

[@Harleyforever20]

What a amazing job! The build quality on this is way better than something that you can buy. You will be using this for a very long time.

[@Adv4x4]

Thank you!! Very happy with the outcome

[@richardthomas1566]

Great Job it’s so great being young , working off buckets bent over no problem . I’m 65 and those days are over I do projects but I’ll set up work tables and horses. Nice job guy 👍

[@Adv4x4]

Thank you Richard!

[@mchristofas]

Yes! Protect your knees! I agree with Richard !

[@Oz710]

Welding and grinding in Crocs…That’s awesome! Glad to see I’m not the only one who does it. Fantastic build build. Looks great.

[@Adv4x4]

Hahaha I’m in and out of the house alot the quick on and off is the ticket 😂 thank you!

[@jimihendrix8535]

I weld in shorts and sliders.

[@bigvin7602]

Good job. Came out looking clean. Liked the way it looked with the TACO pulling it.

[@jaildohenrique9151]

Que trabalho bem feito! Parabéns!!! Ficou top!

[@johnw65]

Beautiful job! Helps me appreciate all the work I got out of with my 4x6 cargo conversion. It's small enough that I pull it with a 2009 Scion XD... It's great to build your camper to your own needs. Have fun out there!

[@Adv4x4]

Thanks John!!

[@johnw65]

@@Adv4x4 I can appreciate building your camper from scratch... It's taken me forever just to put stuff in a ready made trailer...lol

[@matthewgrimson4557]

My favourite thing about this build is no super specialist tools. With the right skills and tools accessible to pretty much everyone. Clearly has great skills 👌

[@Adv4x4]

Thank you Matthew!

[@imonaroll9502]

We use to put a little bit of grease on the trailer mounts and mating surfaces and it would take care of the noises.

[@aaronhardy3348]

You are very talented. I can see the attention to detail and precision that you possess also. Great craftsmanship!

[@Adv4x4]

Thank you Aaron!!

[@jacobcheek6184]

Super cool man, as a young guy this is really inspirational to start building some personal things. Guys at work always tell me I should, but you just made it look super easy with not that many tools. Can’t wait to see what you do next.

[@Adv4x4]

Thanks Jacob! Doesn’t take much to get started! Learning new skills is one of the most valuable things you can do for yourself. I learned alot with each of the trailer builds I’ve done and continue to learn with everything I make!

[@jacobcheek6184]

@@Adv4x4 I have recently started welding on the weekend with my boss, building things to go in our trailer at work. I feel like I’ve already learned so much. Would love to build something like this some day.

[@Adv4x4]

Awesome! Have no doubt you could pull it off. Anyone can make it happen if they apply themselves 👌🏼

[@kaoticmind09]

This is amazing... I've been trying to find a minimalist trailer... and this is exactly what I'd love to own...

[@angelamills8212]

Loves watching this whole build. What a great camper!

[@MattGratt]

I love your attention to detail! Nice work!

[@Adv4x4]

Thank you!

[@imhappyandyou.4003]

First time on the channel and I have to say that your build is really awesome honestly and it looks amazing as well as the campsite lol. I wish you safe and happy travels and please keep us updated on improvements/ add-ons. Hope all is well with you and yours and thank you for sharing this beautiful DIY camper with us. 🙏🙏 Oh and I'm absolutely subscribing lol!.

[@Adv4x4]

Thank you!!🙌🏻 if you haven’t, check out the detailed build videos on the trailer as well. I’ve also build 2 other trailer as well that are documented!

[@imhappyandyou.4003]

@@Adv4x4 Oh I definitely will right now thanks for the heads up, Have a wonderful night and can't wait to see what you upload next.🙏🍻

[@Adv4x4]

Thanks man!

[@imhappyandyou.4003]

@@Adv4x4 You are very welcome good sir!, Thank you for sharing this and giving us the opportunity to build the same with the Plans/How2. I really want to build a "Tiny Home" for myself but I haven't got the time or money "Right now" been saving though and I plan to do so. And I don't mean to bug you but I'd love to hear your thoughts on a different channel that builds Tiny Homes from scratch and I think they do a great job and maybe it'll give you an idea to do the same one day, It's called Incredible Tiny Homes and the gentleman's name is Randy Jones. I'm just curious about what you think about his work and if you think someone could build any of the homes he offers themselves by themself on a decent budget. I'm not working with them or asked to endorse them I just respect them and would love to hear your thoughts. And don't feel you have too just because I asked alright lol. I've been thinking of going such a route for the financial freedom and opportunity to travel and I also think you'd like what they do and are about. Anyways sorry for rambling on but thanks again and I'll hopefully speak with you soon good sir, take care always and have fun!. 🙏

[@SaltySam43]

I regret not taking welding classes in high school. This is great!

[@jimihendrix8535]

It's super easy to learn. I taught myself in 8th grade in the 70's-- no internet, etc. Now with youtube, it is even easier to learn.

[@chetrocket]

This is great! Love how you cut the video down makes it easy to watch and fun! Keep up the awesome content!!🎉

[@Adv4x4]

Appreciate it! Have full build videos available as well. Linked in description

[@kakman1958]

I've been following along the entire build and it's good to see it condensed here. I like the way you stacked the sides when building the frame to make them identical. So many people try to build them vertically on the trailer and it always seemed more prone to error - I'm intending doing it the way you did. Do you have any idea on the final weight?

[@Adv4x4]

Thanks man! It was equally as cool to me to see it all in this video too! I was really excited about this one. I don’t have an exact # on the weight but I’d say under 1000lbs for sure!

[@TheRabid0ne]

Love the vids. And the result. Quick question though: Have you weighed it? I’m really curious for the ballpark mass… and if it’d be a feasible option for my current CUV.

[@Adv4x4]

Thank you! I’d guess under 1k lbs probably close to 800

[@frankmartin-adirondackcampcab]

Awesome work! Very talented, great to see such a hard working craftsmen! Great ground clearance coming down the trail. Bueatiful interior! Enjoy your camping time! God bless!

[@Adv4x4]

Thank you Frank!!

[@vertstang123]

I was impressed with the trailer before you even built the camper! You've got mad fabricating and welding skills!

[@jean-davidgodin7560]

Cool design. Just one point, you should avoid welding all around the tongue tube. It could break under fatigue without warning.

[@BreezyBeary]

Build price?

[@mobileplayers5008]

Maybe up to 5k

[@williamolliges2622]

Very nice build. I hope you enjoy the removable tongue jack as much as I do mine. The peace of mind is great. I’m lazy, so I removed the crank handle and had a 3/4” nut welded to the shaft. 18v drill gives me an electric jack. With a home brew trailer, I’d have incorporated two more in the rear corners for stabilizer/tire changing duties. I’m gonna need to add leading edge fender sliders to my Cargo Trailer conversion after ruining a fender, and seeing yours.

[@Adv4x4]

That’s a great idea with the jacks! I really debated on adding some screw jacks to the rear but I told myself I’d probably never really unhook it. And the way that the axle was placed we wouldn’t be heavy enough to get it to tip. In hindsight it would have been a smart addition just for leveling it alone! Live and you learn! Good luck on your build!

[@Tkis01gl]

Impressive build. Very nice, clean and minimalistic. This build looks like it would have additional add-on option capabilities. Lots of headroom for us giraffes out there. I wouldn't be surprised I see a diesel heater in the future for winter camping. Keep the video's coming.

[@Adv4x4]

Thanks!!

[@John-vf5rs]

Really enjoyed this, that Milwaukee fan is a real lifesaver, electrician myself and I won't go into an attic without it.

[@Adv4x4]

Thanks man! I use mine like crazy. Helps make camping in hot weather at night more doable too haha

[@Shed.therapy]

This is great. Looking forward to finishing up the flatbed and then starting this project!

[@Adv4x4]

🤘🏼🤘🏼🤘🏼

[@netkev92]

Awesome build, and great that you've made plans!

[@Adv4x4]

Thank you!!

[@richardthomas1566]

I subscribed and plan to save this Chanel for 20 years so I can see his next build. It’s going to be similar but able to stand up and a place to sit down . This guy is young and a hustler with a strong back . Just a great Job can’t wait to see the next one.

[@Adv4x4]

Haha who knows what’s next but I have some ideas in mind! Thank you for subscribing and watching!

[@jimmyboy163]

That's impressive! Never seen that type of axle/spring, very cool!!!

[@philrazzi7782]

Great build. Really enjoyed watching that. I've been building Teardrop trailers since 1994 and this design is really appealing to me. On the rattle from the hitch, look up the anti-rattle ubolt. That will fix the rattle for sure. Also, to get more weight on the tongue put the axle farther back.

[@hitman1421]

Thank you for the great video. You have helped me a ton with the AFrame pop up camper I’m building

[@Adv4x4]

So glad to hear it man!! Goodluck on your build

[@thescottishhammer7570]

Love it. Well built. I'd add an ARB (or equivalent) awning to it and solar and use it as my hunting rig.

[@chasevanderdussen8690]

From watching this video, I can tell it was a challenge to build, but you pulled it off. I can’t wait to see what you do next.

[@Adv4x4]

Thanks Chase! It definitely was a challenge. I had never built a camper like that before. Only 2 other open air trailers prior to this. So I at least had practice with the overall frame design and how to do that part which helped. The biggest mystery when I started was the camper body it self. I plan as much as I can ahead of time but I find that I work best with the method of “I’ll see what to do when I get there” haha

[@quietdominator666]

Good on you bro. I’m bloody impressed! I hope to do the same thing some time when I have the space and know how. I hope the future upgrades go well.

[@danielsal5442]

Love this! A bed on wheels. Nothing more, nothing less.

[@claymerritt2860]

I had a K5 blazer years ago and the owner before me had built a hitch for it and had a nut welded on the bottom, left and right of the receiver hole with a bolt in each nut that would apply pressure against the receiver and keep it from rattling. Of course, this would add a little work any time you wanted to swap out the receivers, but it did eliminate the rattle which is very annoying on long trips and insufficient tongue weight as you mentioned

[@Adv4x4]

Thanks for the tip! I think the main source of my rattling is actually from the lock n roll system. But of course sufficient tongue weight eliminates it. With the bike on the front of the camper is when this unit tows the best!

[@VanBur3n]

You included EVERYTHING in the description, and I commend you for that, you really care and that’s spec

[@Adv4x4]

I try my best to be a thorough as possible! Thank you!!

[@Mikaellafleur26]

The work you did is amazing young man congrats to you

[@joshhind4452]

I have never wanted to build something so badly, great job!

[@Adv4x4]

You can do it man!!🤘🏼

[@user-zb1fl1fq5d]

fico perfeito demais. Que trabalho bem feito!Parabéns!!!Ficou top!.

[@jondoe5392]

Just found your channel, Its awesome you have the skillset and materials to complete this objective. I can do plenty of things but this project solo is way of my head. Peace.

[@Adv4x4]

Thank you!! Appreciate you watching.

[@jonbradley4789]

FMD, that was both mesmerizing and satisfying. Well done!

[@Adv4x4]

Thank you!!

[@Littlemobcraft]

The best ❤❤❤

[@backroadadventurers3221]

I have converted a couple cargo trailers and built one RTT Trailer so far. But something like this is my next build this winter. I am going to use some of your ideas in my build. Thanks for posting as I know the work that goes into a KZbin channel. You just gained a subscriber. Rob Dodd Backroad Adventurers

[@Adv4x4]

Thanks Rob! Subbed to your channel as well. It’s a long road but the key is to keep putting content out there! Keep it up!

[@jeep10921092]

The trailer turned out awesome! Nice work.

[@Adv4x4]

Thanks Mike!

[@dm9492]

This is amazing..you did a great job. I'd add that the beeping sounds like ita coming from the remote, if that's the case you can open it up and unsolder the small piezo buzzer in there. I have done this in many remotes that I couldn't turn off. A little tip to bring you some sanity. Thank you for sharing this amazing build. Good luck out there

[@Adv4x4]

Thank you!

[@JohnnyBravo1977]

you put quite a bit of work into this and it's well worth it. You will end up adding many more stuff to the trailer, hope to see that in an other video

[@Adv4x4]

Thank you! Uploaded the roof rack video yesterday 👌🏼

[@TheMpuppy]

Man, by watching your clip, you are really skillful, and you do know what u r doing! (Instead of some others doing their DIY project and trying to make some sense of what they are doing in their clips.) Keep up the great work!! Subscribed of course.

[@Adv4x4]

Thank you Nick!!

[@chrissmith-no3bo]

Im a very impressed with this camper build. Happy camping ❤❤❤

[@vythyolso]

Thank You so much for all the work you put in to these beautiful videos!

[@Adv4x4]

Thank you so much for watching!

[@vythyolso]

@@Adv4x4 Thank you

[@Cory_LaRose]

That is the fastest building i have ever seen. He was moving faster then my eyes can see. Incredible.

[@n2firetoys]

Absolutely amazing work. Great video too.

[@user-lb7fs9db3f]

Здорово ! Хорошо когда есть такие РУКИ. Молодец, настоящий Мастер.

[@RS-chino]

This is awesome brother. Exactly what I want to build but I’d add a slide out drawer from the side for kitchen etc

[@Adv4x4]

Thanks man!!

[@nicolafrongia7119]

Molto molto molto bello, anzi fantastico. Complimenti per la fantasia è la manualità di costruzione. Bravissimo

[@alpinebro619]

Super cool and CLEAN build! I like your Taco too! Hope to see you out there 🤙🏻

[@Adv4x4]

Thanks Aaron!!

[@JamesEBraus]

Nice. Side shade and fold out kitchen would be a fine addition.

[@scottbowe2617]

excellent, but I do have idea that might work for u u got coat rack by the door but a set of hooks down center of the bed, gives u a lot storage options I've learned. hooks on the roof, awesome build

[@histufly]

If I build one, I would do it like this one. Thanks a bunch!

[@johnbosworth9546]

Bro! I love this video! It helps me understand all the mechanics. You have some awesome ideas with this one!

[@Adv4x4]

Thank you man!!!

[@Iloveyoutube11]

Wow! That’s amazing! I wish I could do stuff like that. Great job!

[@Adv4x4]

Thank you! I bet you could if you tried! 👍🏼

[@winds10]

Well done! That's some next level stuff.

[@Adv4x4]

Thank you!🙌🏻

[@jayoyler8840]

What a ton of work! Very good job love the video.

[@Adv4x4]

No doubt about that! Thank you man!

[@Nobody_896]

Wow what a fast worker, I must confess it would have taken me least twice as long to build one,

[@nylonnalini]

Get a 100ah/200ah deep cycle battery on the Hitch and wire everything from there. Free up the space in the cabin used by that Jackery. Could also put a propane and water tank on the hitch. Build a lockable "extension" box on the rear to hold a table with stove for outdoor cooking. We spend an hour after arriving at site just to Setup camp! Wirh this we will setup in 5 minutes after arrival!

[@harrymills2770]

Beautiful job. Things I'd do different. Most of the differences are 4-season base camp related. * 5x10 body, maybe longer, but still keep the same cross-section. Yeah, you might get stuck on a Kelly hump, but what were you doing dragging a trailer over a Kelly hump? * Moar insulation. * Back-wall that's one big door or 2 swinging doors. I like one that opens into an awning. Don't think I'd want air struts. Just an arm that fits into a bracket. * Woodstove in one of the back corners. Kimberly's are spendy, but 6 inch clearance is all you need and they burn very clean. * Have an outfitter tent tailored to marry up with the back of the trailer. Something solid, like a good Montana Canvas 10x12 is pretty easy to set up, solo. Have them (or the Amish) make a custom wall made for the square-drop. More time-consuming setup than a batwing awning, but way sturdier. I've been caught out in BAD weather enough times to not trust those batwing awnings. You don't want gear that fails when you need it most. Random thought from your dirt bike thing: I think you could fit a 100 cc dirt bike or small atv in a 5x10x4. Not positive about the height, but yeah. I'd be thinking along those lines. You'd have to roll the bike/atv out to camp, but it'd ride better there than on the tongue, if you could pull it off. You'd probably need some sort of simple slider, because there wouldn't be room to ride it in. But I think you could make one of these a mini toy-hauler.

[@joshualeafe3230]

You should post a video. That way your power point comment might sound less condescending…

[@AnyHouseCleaning]

Awesome job. Beautiful

[@Luisinho2]

amazing videos! really impressive, you make it look so easy to build one. 🙏🏼💯🔥 my hands are itchy to build one now

[@Adv4x4]

Go for it! You got this

[@TV-db7gx]

매일 악당만 처치하는줄 알았더니 본업이 있었군요 잘봤습니다 플래쉬~~!

[@Martin-yl5zb]

Great use of VHB tape! Smart choice 👍🏻

[@Adv4x4]

Thanks Martin! Stuff is incredible

[@philmarmanillo1354]

We need more guys like this.

[@newtome-jessegates6310]

Damn dude that thing looks awesome! Aesthetic as hell!

[@Adv4x4]

Thanks man!!

[@juniorhb2732]

A sua criatividade foi nota 1000.

[@commonsense2469]

Great job dude!

[@skeletorrc2583]

Super Cool. Great work!

[@Sam-xt5gb]

Great job man! I just started my trailer build and I got a lot of inspiration from you!

[@Adv4x4]

Love to hear it man!! Good luck!

[@dronesinconstruction]

The time spent on editing and recording is the key

[@danielsal5442]

Good thing your rv has tiers that can handle mud. So they don’t get stuck 😁

[@deserttrailscout]

This is so awesome! Wish I had the resources to do this myself

[@Adv4x4]

Thanks man!!

[@grahamlopez3742]

I have all the tools, and all the skills to use the tools, now I just gotta figure out where he got the motivation from and I'm all set

[@gastonbatuco2391]

Super cool, awesome. Congratulations 👍👋👋👋

[@michaelmccrumb7496]

Great build!!!

[@freetobe3]

As some have said, adding a solar panel would do wonders for easing some of the electrical needs you might have for longer stays. Also, as is the build seems to have a considerable high center of gravity and solar panels would make it worse. Adding a few batteries, especially older heavier ones or more expensive newer ones in larger quantity would help a lot in front of the trailer wheel axis. Understandably it would increase costs but in the long term, slowly adding the items would ease a light wallet.

[@SeauT]

Beautiful craftsmanship. Congrats and enjoy.

[@Adv4x4]

Thank you Dan!

[@rinaldy0812]

Mengagumkan. Salam dari West Java Indonesia.. Suatu masa kubuat juga

[@mikeredhead2894]

Great work and final product!

[@valhallagarage]

This video needs way more exposure than it has well done 👏

[@Adv4x4]

Thank you Jonah!!🙌🏻

[@remyllebeau77]

Can you build one where the whole outside walls (except for the front) slide out on the back side, which would create double the space, and the remaining part could be an inside wall with hinges that allow it to swing up 90 degrees to create room for standing and also a larger door.

[@Adv4x4]

Anything is possible if you are willing to put in the work! I was going for something simple 👌🏼

[@zoladkow]

best demonstration of milwaukee vacuum i've seen to date 😁

[@Adv4x4]

😂😂 I love that thing

[@semekafilms8214]

Красивый вид из гаража и хорошая работа 👍

[@almir........7033]

ESTE É O PRIMEIRO CARA ESPECIALIZADO EM FÁBRICA TRAILERS PRA ANÃO QUE EU VI. SE ELE FIZESSE DE 1.80 DE ALTURA DARIA PRA FAZER TULHAS E BANHEIRO.

[@lynnamarsh6384]

He does this all on the floor. That would be so hard. No work table. respect this guy !

[@Adv4x4]

Nothing good comes easy!

[@Jerbrown]

This was a great series. Thanks!

[@Adv4x4]

Thanks Jeremiah!

[@waynedyer3475]

Nice. Injoyed the video. Thank you. The best to you and family. Be safe.

[@Adv4x4]

Thanks!

[@doghousephoto]

Very nice Job! Both with the build and the filming.

[@Adv4x4]

Thanks William! All the Timelapse’s are actually shot on an iPhone 👍🏼 Last talking segment was with my Sony a6600

[@tombulli1236]

Wooooow!!! Wow! just wow! I'm excited! There is a lot of love in your work! Respect! I hope you have fun on your adventure tour with your camper! I already gave you a thumbs up! GREAT! :) Greetings from Germany :) TOM