Alfa Romeo 159 Brera Wishbone Removal Guide

Music: www.bensound.c... or from Bensound.com
How to change your lower wishbones. Its the same for left and right also for Brera/Spider.
To contact me go to.
italiaautoparts.co.uk
or
/ www.italiaautoparts.co.uk
I am also on the look out for Alfa Romeo car products to review.
I if you have something i might be interested in (cleaning products, new parts, car modifications etc.
Also sponsership is also somthing im looking to start please contact me on the above links.
Also if you have any projects or broken Alfa for sale and your within 100 miles of walsall west midlands please get in touch
as im always looking for new projects to make videos on.
thanks Neil at italia autos.

[@benjarvis5407]

Just replaced my lower wishbones the other day and also tie rod ends with TRW parts. Suspension feels amazing now, no more clunking/squeeking from those ball joints. Really appreciate you posting this video as I used it to help me do the job, cheers!

[@scottlehuray7062]

They do make a nice differance, a more together feel through the steering. A job wellworth doing imo

[@sylviamurley4968]

Really good camera angles and everything explained so well

[@ItaliaAutos]

Sylvia Murley thanks. It was a challenge for some of the shots.

[@jordlc3480]

This guy convinced me to buy my 159 2.4 auto Thank you very much 🥇💕

[@rjb7026]

Thank you for another great guide, was planning on doing my driver site as the ball joint is noisy, now I have a great guide to follow.

[@ghostdog4330]

You make it look so easy..

[@Yudiguard]

You're very persuasive with that hammer :D

[@ItaliaAutos]

Best tool in the workshop 😁

[@musmuk5350]

Great shots and helpful tips and tricks. Thank you Ronald!

[@molluscturtle]

Great video, Neil. I’ve got all the gear, but I do think i might not be arsed doing this myself; doing this lying on my back looks about as much fun as sticking pins in my eyes!

[@FullBoostJ4]

Another job well done.

[@stingrayfull]

Well done, I have the 159 2.4 and I hate the lower wishbones, I drive my Alfa in Roman ways and you can believe me, every time there is the same noise problem from lower wishbones.....but anyway I love my Alfa

[@scottlehuray7062]

Id change them before they reach £200 a side. I paid £186 each for mine

[@peterboot7120]

Nice Job ,gone polish my de 147 today leave the professionele Jobs to you hahaha 😊💪👍.

[@lcka81]

the gearbox side is a funny side :-) I did this yesterday

[@scottlehuray7062]

Just had mine done 1.9jtdm ti, was good before but wow the ride feels sharper, tighter and slighlty more comfort. You can feel more rubber shock absorbtion. originals were 14 years old and still passing mots lol. O.e replacement parts from alfashop, its just not worth putting cheap rubbish on.

[@lemi319]

You dont need to disconect drive shaft, upper wushbone and tie rod. Use crow bar to drible out wishbone when you undo nuts and bolts, i changed both month ago🙂

[@ItaliaAutos]

As I said at the beginning there are several ways of doing it I removed it mainly so you can see more in the video and I'm also used to doing them on 147's and old habits die hard lol 👍👍👍👍😀😀😀

[@JoJanDiezel]

Are you telling me that I need to remove just the bolts holding the lower wishbone and I can do the rest with a crow bar? That sounds easy, is this the way what I'm thinking you are saying?

[@ItaliaAutos]

@JoJanDiezel sometimes it works that way but not every time.

[@kahumike]

I had the problem of cross threading the bolt the first time I did this on my 156. Fortunately I hadn't gone too far in and I was able to re-tap the thread by using a thread cutter starting from the other side. It's a job I really do not enjoy doing. Next time I'll pay someone to do it for me :)

[@el1221le]

YOU DON T USE THE MANIFACTURER'S TIGHTENING TORQUE FOR THE NUTS... YOU USE THE HAMMER HITTING HARD THE NEWS PARTS... (you can use a wood to hit with the hammer) BUT... YOUR EXPLICATION ARE PERFECT

[@rupertpiersbutler]

Thanks. Good knowledge for when the time comes...

[@donnagrimshaw3512]

ball joints usually open easy with a ball joint splitter

[@georgialtanov4561]

Hi mate, great video, thanks. Just want to ask you about this impact? What brand is? Or if you can recommend some good for this job?

[@djpunisha29]

nice video, thank you for sharing

[@MecaManiaque]

Hi, On this job you are my hero 😉

[@EtiamVitae]

On attends le tuto sur mecamaniaque en français 😉

[@MecaManiaque]

@@EtiamVitae ça arrive ! t'inquiète 😉 La pièce prends déjà la poussière dans mon garage 😅

[@EtiamVitae]

@@MecaManiaque pareil ça prenait la poussière avec les cardans également... J'hésite trop à m'y mettre depuis 2 semaines, mais ma brera secoue lors de fortes accélérations depuis peu, du coup là plus le choix de le faire... Mais ce n'est pas la petite affaire ce triangle. Bon courage à toi.

[@EtiamVitae]

@@MecaManiaque et merci pour tes vidéos très appréciable et de qualités !

[@EtiamVitae]

Les 2 grosses visses sont vraiment serrées très très très fort ! La simple clé de 30cm ne suffit pas. Limite il serait plus simple de meuler les têtes et laisser le reste sur l'ancien triangle...

[@strebblo123]

Hi Neil, thanks for the helpful video - I've had a lot of squeaking from the front suspension for the last 2 months under up/down movement (which went silent last week - bit concerning!) I believe this is likely to be the lower front bushes, is that right? The squeaking is very loud when I turn when parking the car too (159 2.4 sportwagon) - is that also the lower bushes? I'm considering getting poly bushes and fitting them myself - do you expect them to cure the problem and will I need to get a 4 wheel alignment because of the repair? Many thanks for the great content and useful guides..

[@ItaliaAutos]

thanks for watching.

[@jonidefer313]

whenever your suspension has been worked on, you always want to get the car realligned

[@Salman-sc8gr]

Is it same upper arm set up on 166?I have excess camber wearing out tyres on inside. Are there some adjustable bushing available?

[@amehu]

Super videos!

[@ItaliaAutos]

Thank you very much!

[@Obertassie]

Hello! Could you please advise which wishbone's bushes should be tightened under a load? Thanks for the video!

[@300zxTwinT]

Lower wishbone should be tightened under a load or wheel down on 4 column lift.

[@onoris9202]

Bravo

[@BenoitXVIII]

Thanks ! Except the expensive genuine part, what wishbone's brand and model would you recommend ? As some of them become noisy only after a few times ...

[@dom1natorrr]

TRW , MEYLE HD

[@ItaliaAutos]

Avoid eBay ones as they won't last you long.

[@BenoitXVIII]

@@dom1natorrr 👍👍 thanks

[@BenoitXVIII]

@@ItaliaAutos ok 👍

[@rneoman]

@@ItaliaAutos but meyle are on ebay

[@leopoldhazelzet4796]

Thanks for the tutorial. Yet, as I'm considering to replace the rear bushes only, do you have experience with that? Does it require to disassemble just as much? Tia.

[@ItaliaAutos]

Yes same

[@leopoldhazelzet4796]

@@ItaliaAutos Thx for the swift reply!

[@veliborribac9748]

Can somebody tell me please tightening torques for every bolt?

[@lurdespedro8176]

You reuse the old screws or you fit new ones since they are angle torqued

[@scottlehuray7062]

Old are fine for second use.

[@MrSmithers4553]

hey mate I've recently bought a brera in need of some front end refurbishment. Is it possible to only replace the rubber bushes on the wishbone or would you recommend replacing it completely?

[@ItaliaAutos]

replace as ball joint goes also.

[@scottlehuray7062]

Allow £400 parts and 3 hours labour. Well thats what it cost me, its a big job but should last another 10 years + Doing this on your back in the drive does not appeal to me.

[@stzbg90]

There was a crack on the frame... :O

[@camerondowning7523]

What sort of symptoms would this cause. I'm getting squeaking over bumps and when steering from the near side only. Also how much does this cost so I can get an idea for price

[@ItaliaAutos]

either upper or lower wishbones

[@timbeasleyscuba]

Hi thanks for this video. Quick question. I followed this and as I was dislodging the ball joint it started leaking pink fluid from what I presume is the steering rack. Do you know what could have happened?

[@ItaliaAutos]

You broke something or your steering rack is broken

[@timbeasleyscuba]

@@ItaliaAutos is that fixable or will it likely need replacing. Its a 159 2.0

[@timbeasleyscuba]

Looks like I dislodged the driveshaft from the gearbox. Any advice on how to reseat it?

[@nestus4874]

Can anyone tell me what impact wrench he use? (company, model?)

[@ItaliaAutos]

dewalt dcd778p2T

[@BojanBojovic]

Is there a crack or it is the light playing games?

[@ItaliaAutos]

The light.

[@mckenzie125]

Would you recommend the poly bush upgrade for the lower arm?

[@ItaliaAutos]

If its cheaper than a new good quality wishbone.

[@mckenzie125]

@@ItaliaAutos I have the bracket with the poly bushes fitted. Just a matter of fitting it. I've heard it's a good upgrade and stiffins the ride and handling a bit.

[@ItaliaAutos]

@@mckenzie125 yes it is.

[@scottlehuray7062]

A new o.e arm with new rubber bushes gives a very tight sharp feel but also a very complant ride. I did consider poly bushes but glad i chose New rubber, mines not a track day machine, just a weekend A &B road toy. Its great. 159 1.9jtdm mapped ti on eibach springs and B6 shocks. Perfect for me.

[@bgsancho]

On 159 it is 5 times harder than on 147,156,166...

[@scottlehuray7062]

Put mine in a good local workshop cost £150 to fit both, thats a bargain. No way id do that job offa trolley jack.

[@bgsancho]

@@scottlehuray7062 trolley jack is dangerous of course.

[@andrew1212w]

Brilliant but I still wouldn’t attempt it myself 😊

[@scottlehuray7062]

Off a trolley jack would be a world of pain.

[@notacrazyperson3416]

Smashing alloy parts with a hammer is not a wise thing to do. Buy a joint splitter. Using a hammer can cause fractures or cracks. Very expensive when you later realise you have damaged them. Otherwise good vid.

[@scottlehuray7062]

A hammers fine, or a copper mallet, those arms are very heavy duty.

[@alfanapodnosniku4155]

Hi, I wonder, what whould you do if I took you a hammer ? ;) Greetings from Poland. (159 2.0 owner)

[@peterboot7120]

Hahaha Alfa's hate speed bubs my baby too💪👍.

[@peterboot7120]

Keep up the good work 👍👍

[@davidegan4773]

🤣🤣🤣🤣 Never in 35 years have I had those joints on any Italian car come apart so easily with a wallop of a hammer. I'm suspicious you split them and just tightened them up again for the video 🤔🤔 And I used bigger hammers 😛

[@ItaliaAutos]

Just cut out a few taps in the edit

[@neonflashbang3055]

Bloody hell at least use a rubber mallet!