Tested the Best Flight Modes Setup for FlyWing GPS RC Helicopters

Uncover the hidden flight modes of FlyWing GPS RC Helicopters as we meticulously set them up and conduct thorough flight testing. Witness their incredible performance enhancements and take your flying experience to new heights. In this video I will be showing bestest FlyWing GPS RC Helicopters Flight modes setup for all levels of pilots. Also will test ATT, and 6G modes and explain their differences. Enjoy the video.
Best H1 Scale Heli Settings: bit.ly/h1scale...
EdgeTx Heli Models: bit.ly/edgetx1...
Best Flywing RC Helicopters
FW450 V3: bit.ly/fwrc450v3
Huey UH1 V4: bit.ly/fwrcuh1v4
Airwolf: bit.ly/fwrcair...
FW200: bit.ly/fwrc200
Scale Heli Parts: bit.ly/fwscale...
FW450 V3 Parts: bit.ly/fwrc450...
H1 Flight Controller: bit.ly/fwrch1
Best Radio Controllers:
RadioMaster TX16s: bit.ly/3FBQMnt
FrSky X20S: bit.ly/frskyx20s
My Digital Products: shopcreate.gum...
My 3D models: bit.ly/alis3dwork
Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinali...
My website: createc.store
Disclaimer: The links to products provided in my video descriptions are my affiliate links. If you order products using those links, there will be no price increase, but I will receive a certain commission on each sales from those links in this description. This commission income supports my family and help me continue to run and manage my youtube channel.
#flywing #helicopter #rc #gps

[@exit1368]

😎👏 This works perfect, so cool - and many thanks to you! I did my 1st flight with stock settings in 10+ mph gusty winds with no issues. Just finished my second flight after using your GPS/ATT/RTH settings, so much fun to fly especially in calmer winds. I’m very impressed with the quality and performance of this brand thanks to discovering on your channel 4 weeks ago. Take Care, Be Well 🙏

[@alishanmao]

Fantastic! and congrats. have fun

[@SupremeRC]

❤ U the man. Love your humor.. Keep going. You should have 500k already..

[@alishanmao]

I appreciate that! Soon 500k insha Allah :) working hard for it

[@jeromeramos1463]

Back to the hobby again. Found you when I was in Highschool and I am now 35 years old!!! Thanks for this advice!!

[@alishanmao]

welcome back

[@BobcatBart]

Fly Wing should pay you a commission! This video convinced me of what my next helicopter will be - GREAT VIDEO!

[@alishanmao]

I wish they did :) thanks buddy. you can always buy using my links and I can earn some commission :)

[@RCscale101]

Your videos are priceless! Thank you so much

[@alishanmao]

Thanks for watching! and support. join my supporters group if you like: www.buymeacoffee.com/alishanmao

[@RCscale101]

@@alishanmao Just done!

[@goldenmanuever1176]

two FW beauties Ali! Love watching you talk about and fly these. My FW450 V3 is still going strong!

[@alishanmao]

Thank you so much for following my work. keep flying these :)

[@joshandersons6914]

very good tips, thanks. I'll wait for version 4 since V3 have crash issue seen on a few videos

[@alishanmao]

not sure if V4 has resolved those. there is no change in V4 except the new main rotor blade system

[@omarsyahrilnorazmi3302]

I still remember. Long time ago, if you want to play 6ch helicopter, you need to play from simulator first before you play the real 6ch helicopter. Because you will keep make your 6ch helicopter crash. Now, with all the stabilizer technology, you can jump up to 6ch helicopter with beginner mode.

[@alishanmao]

super easy now :)

[@UnderTheRadar1976]

Loving this stopped flying helicopters and planes a few years ago and went to drones even know I still own a few still this gps helicopter is a game changer I got to get one now

[@alishanmao]

Welcome back to RC helicopters, links are waiting in description :)

[@rolandvaillancourt7232]

Thank you for sharing this information and the detailed video love this helicopter Roland V.

[@alishanmao]

you are always welcome, join my supporters group if you like: www.buymeacoffee.com/alishanmao

[@joshandersons6914]

That Huey is beautiful, waiting for version 4 to get one

[@alishanmao]

V4, just new color scheme, new rotor head + new blades. rest is all the same

[@nevTk-oe9ud]

amazing thats cool as Ali , legendary !

[@alishanmao]

thank you :)

[@fakhrealam2008]

Awesome, thanks for sharing.

[@alishanmao]

Thanks for watching!

[@fpvpilot7713]

Agree, the worst place you could have gps in in the middle where it would be hard to find in a panic. I often wonder What are they thinking? Logically return to home should be down position. Logically engine off should be down position and run should be up position. I hope they fix all of this and I would buy one. I really don't want to buy a rtf and have to start programming.

[@alishanmao]

its the matter of getting used to what they supply in RTF or buy PNP, get a TX16s from radiomaster and program your favorite switch positions yourself

[@gregorydahl]

Thats cool it sounds real

[@alishanmao]

it does

[@05rickie]

Thank you, very well done,I do not fly 3D, I will try this setup on my FW V2.5 and V3,Thanks again.

[@alishanmao]

Glad it helped

[@giopirmisashvili5514]

Thank you

[@alishanmao]

You're welcome

[@mikesanders3044]

I so want the Hewey uh1 but I will never be able to afford it, Thank you for the review on both of these Two beautiful helicopters.

[@alishanmao]

keep working hard. one day you will get your dreams come true

[@gilsonemidio8511]

Ok, Thank you

[@alishanmao]

Any time

[@izzaniielachannel]

Thanks for sharing sir

[@alishanmao]

So nice of you

[@marc_s9853]

Dear Ali, thank you so much for your videos! I ordered an UH-1 and I already learned a lot thanks to your fantastic videos! I have a stupid question though: is there a reason why you always take off to 1 meter altitude in sort of 1 millisecond 😅when you're in GPS mode, while you're doing it really scale and slow while in 6G or 3D modes? Please keep on sharing your tips, your enthousiasm make us feel good 🤩!!

[@alishanmao]

Thank you for your support to my work. well that quick non scale take off is in GPS mode and there is no way to avoid it. i can only do scale take off in 3D mode :) join my supporters group if you like : www.buymeacoffee.com/alishanmao

[@05rickie]

@@alishanmao I have the V2.5 450 and the V3,the V2.5 will lift off very smooth when fully spooled up,the V3 when fully spooled up will jump up very quickly,what I have learned with the V3 is to lift off B4 it gets to fully spooled and it will lift off very smooth and easy.

[@trondyne3513]

Thanks for the great videos man... Can you possibly tell me the channel order for the H1 and the Huey V2 ? I am setting up my own radio for this ship... To be clear I mean like 1-2-3-4 (TARE) Throttle-Ailerons-Rudder-Elevator) and any other info that might be helpful? Perhaps there is a file for OpenTX? I am using a Taranis X7S... Thanks for any help!!!

[@alishanmao]

AETR Welcome buddy watch complete setup guide here: kzbin.info/www/bejne/gJO3dox5npaKaq8 best settings for UH1 Helis: bit.ly/h1scalesettings

[@nv180399]

Sempre belli i tuoi video..quindi ho capito che conviene impostare lo stick in alto per home...lo stick al centro GPS...lo stick in basso ATT...corretto?

[@alishanmao]

ATT in the middle, because switching up or down is naturally easy :)

[@IBHobbies]

Wow cool

[@alishanmao]

Thanks bud

[@user-lf6pl5fh3v]

Hi Ali it's me again I am still having trouble with my 450 2.5 helicopter it flies for 1min and then lands can you tell me how to setup the trasmitter on the power settings. Thanks

[@alishanmao]

its not in tx. you need to check your battery. charge it properly to full. disable low voltage RTH. if its landing itself that means battery is dying and has no power to even RTH, so it auto lands

[@Starkman3]

I enjoy all of your videos! It is super hot here in Florida right now, so I'm not flying my FW200 as much, but I would like to stay in practice. Do you have a recommendation on a simulator and model that might be close to the FW200? I need to keep current, and practice full manual before I go out to the field. Thanks for your help!

[@alishanmao]

best physics flight simulator is RealFlight G7 or above

[@Starkman3]

@@alishanmao Thanks for the advice! You have probably flown more helicopters than anyone. Which has the closest flight characteristics to the FW200, that might be found in Realflight 7?

[@vintageguitarz1]

I absolutely LOVE your videos, I've been flying RC and Control Line since I was 12 (I'm 74 now) and I still learn new stuff from your video, especially new hardware, modes and controllers. I flew the UH-1G and F Gunships in Vietnam (1970-73) and I'm impressed with that Huey model, so many in the past were more toys with no realistic flight characteristics. I think I'll get one now. Capt ret. 20th SOS, 27th Spl Ops Wing, USAF 20 years. Thanks Ali!

[@alishanmao]

Get one Captain :) you will love it. its absolutely the best UH1 Huey RC model out there :)

[@dradden1556]

I down loaded the software for my uh-1 Huey it's saying the main rotor is at 65 percent and tail rotor is only 35 percent speed. Factory set. Is that right or should my tail speed be higher?

[@alishanmao]

if its set from factory then just fly it and adjust only if needed

[@gilsonemidio8511]

Hello Alishanmao, to fly in ATT mode do you have to make these settings that you taught or is there a switch on the radio that allows this without changing the factory settings?

[@alishanmao]

a new detailed video tutorial coming soon to my channel that explains all. but please do watch my other video tutorial on how to setup all 5 flight modes. it explains all these concepts.

[@goldenmanuever1176]

Hey Ali, when I am in 1400 ATT mode, the helicopter will respond the way it's set up in FW 1.9 SW for 3D mode? I have a ton of tuning I did to my liking...

[@alishanmao]

i believe it should respond as per your tuning

[@gilsonemidio8511]

Hello Alishanmao, I'm flying until the flight battery has around 3.85v in each cell so as not to wear out the battery so much. This generates an autonomy of 10 minutes. What do you think?

[@alishanmao]

fly until 3.6v

[@Lonsome1223]

HI ,I Have the FW 450 V2 and set the 3D mode to 1400 to get ATT mode as you suggested .At about 15 feet i selected ATT and the helicopter just dived into the ground. What have i done wrong.. Also when gps is lost in flight what happens,..

[@alishanmao]

double check your values with assist program if they are switching to ATT or 6G. after changing settings or values in radio, you have to stick calibrate radio and then stick calibrate in assist again. in order for the values to take effect properly

[@Lonsome1223]

Ah,thanks must have missed that bit in your video .THANKS AGAIN.

[@hitime2405]

Another fantastic and informative video, thank you. Sorry to go off topic here but I’m thinking of putting my FW450v3 in a Westland Lynx scale fuselage and I need to put the tail rotor on the port side of the tail because the Lynx has a horizontal tail on the starboard side, how would you do that electronically? or perhaps you could include it in another future video please.

[@alishanmao]

Thanks buddy. I may not have chance to make video about it but what i understand is you need to reverse the motor (physically you need to resolder swapping two out of 3 wires) and then use a proper propeller for reversed motor. after that need to see how gyro acts and controls

[@hitime2405]

@@alishanmao indeed, seeing how it works after doing that is the worrying part, I may just go the Fly Wing Huey way and just live with the rotor on the starboard side and be happy that no matter what it will never be the real thing, thank you for replying, you are fantastic.

[@hitime2405]

@@alishanmao coffee on the way, thank you sir.

[@Lonsome1223]

Can this transmitter be set up with the throttle stick at low position not mid stick as the default ?.

[@alishanmao]

probably you have to open it and remove the spring on throttle

[@Lonsome1223]

@@alishanmaoThanks for the reply but the starting point in the software might be a problem it's programmed at mid throttle might be able to adjust this in the software I'll take a look. Thanks .

[@dradden1556]

Wow.your gps locks quick. I have the same v3 huey and it takes 5 minutes or longer for my gps to lock green. Sometimes not at all if weather is cloudy. So I just put it away and can't fly.. why is mine taking so long to lock green ? Is there something wrong with it?

[@alishanmao]

check the GPS installation location. sometimes moving it to other location does the job

[@dradden1556]

The wire is not long enough to move it. You think I should try ordering a new gps modular maybe? They are cheep. It's like a lemon car. Lol . I think I just got one from Flywing

[@alishanmao]

install Stick GPS on top of flight controller@@dradden1556

[@fernandomunoz988]

Saludos...desde cuidad de México

[@alishanmao]

Thanks buddy 👍😀

[@adriansullivan-q9i]

can you put the main rotor blades off the H1 ON airwolf buddy?

[@alishanmao]

yes same size

[@JamieElvisGass]

Hello, I love your videos. You inspired me to buy a FW450 ver 3. Can you please send me the link to the software 1.9. I only can find 1.7 from heli direct. Thank you. Jamie

[@alishanmao]

hello jamie, you can just google for flywing website and download from their download section. but you will have to disable your antivirus and make an exception for the executable file or else it will get deleted with a virus warning

[@marc9164]

Great video as always, this works great on my fly wing Airwolf, should this work with the same model transmitter and each one in a different helicopter? In other heli I changed to 1400 to ATT from previous switch mode 3d and the helicopter wants to fall out of the sky.

[@alishanmao]

changing values should work. it should not fall out of sky that way, must be something not set right

[@MrZxooxz]

cool video, now do FPV on them please :)

[@alishanmao]

scale helicopters do not need fpv buddy. removing vibrations will be a headache LOL

[@did.dynamics8504]

on my 206 BELL V2 THE MODE ATT (1400) GIVE 6G mode NO altitude hold and autolevel on

[@alishanmao]

hmmm maybe older firmware or h1 lite?

[@EJ-74]

NIIIIICE 👌🏻

[@alishanmao]

Thanks buddy 👍😀

[@xboxice2005]

Hi my bro can you tell me what fuselage that will fit the walkera v450d03 thanks ")

[@alishanmao]

no idea for now buddy. those are like decade old helis. apologies

[@MangGai168]

Thanks for sharing 🙏 Question is Have this setting just can set on original controller?

[@alishanmao]

if you remember the values 2000 RTH, 1500 GPS, 1400 ATT, 1300 G6 and 1200-1000 3D you can set these on any radio on the flight mode channel

[@MangGai168]

@@alishanmao Thanks a lot 🙏🙏

[@hitime2405]

Is the white transmitter only capable of one model per unit, I have the Huey and 450 v3 but would like the Bell 206, but that means 3 transmitters, I already have at least 20 normal ones, thank you for your excellent videos and advice.

[@alishanmao]

it can do 5 models

[@hitime2405]

@@alishanmao excellent , have you done a video on this, or rather can you please 🙏

[@alishanmao]

@@hitime2405 i have shown in my previous setup video i believe how i setup this radio

[@iriquiosgunship]

Beautiful! I have been flying a flywing H1 huey without a glitch. Unfortunately, this morning I tried to fly but kept seeing red flashing light and beeping alarm. I tried to recalibrate GPS but it was the same result. Please help. I'm looking forward to buy V3 and airwolf body in the near future.

[@alishanmao]

Hi buddy, in this live show i have covered many issues. you might wanna watch it and you may get a solution kzbin.infoJKUiy8XMcGM?feature=share

[@iriquiosgunship]

@alishanmao thank you. It looks like my ESC is out. The tail rotor spins but not the main rotor.

[@123windyron]

What switches do you put on your radio to put it in ATT MODE? Ali thankyou.

[@alishanmao]

Flight mode switch, ATT, GPS, RTH on SC and then over ride the values using SE for 3D and 6G Modes.

[@BobcatBart]

Is the sound of the rotor unique to the Huey, or does the Airwolf sound the same?

[@alishanmao]

same sound mostly

[@shaundavies5151]

Hi there is there a way to set flight mode to 6 xis or ATT on any other radios, I have a iX12 Radio flying with DSM2 Orange 9 channel receiver with H1 heli on my Trex450 ? or do I have to convert to the flywing Radio ?

[@alishanmao]

its all about setting up PWM values that you output on Channel 5. if you can program your radio to output 1400 instead of 1500, you will have ATT mode instead of GPS. and so on. check my other setup videos that talk about these values for different flight modes

[@vaggost.3933]

What's the best rc helicopter simulator to learn 3d for pc?

[@alishanmao]

i use realflight G7. it has the best physics

[@dhonnat]

I Like it like it🎉🎉🎉🎉😂

[@alishanmao]

Thanks buddy 👍😀

[@superchaos1]

Can att mode be used with a NX8 controller some how with a trex 500X?

[@alishanmao]

yes if you can set the values

[@gerryviloria4265]

Hi Ali can you still do the inverted flight if you switch back to GPS. And can you put the ATT to the 3D switch removing the 3D function?

[@alishanmao]

on scale helicopters i will not suggest you to do inverted flight. Huey UH1 have disabled this feature, you can only do inverted manually in 3D mode. on Airwolf its FW450 v3 so you can do inverted but its too heavy to do that. yes you can use ATT and disable 3D or you can use all 5 flight modes

[@05rickie]

@@alishanmao So you can use the O fly and figure 8 switch "I do not use any way" and add 2 more flight modes ?

[@alishanmao]

yes buddy, those are standard on a separate Channel so they are always available to you @@05rickie

[@raymondccq]

Wondering Att mode work after flip inver

[@alishanmao]

it should

[@robertpletcher3950]

Hi ali, on my uh1 v3 in ATT mode it doesn’t hold altitude it drops when switching from gps. I have calibrated the sticks in the transmitter and on the pc H1 software and have set the transmitter to 1400 and tried 1300, no luck. Do you have any other ideas? Thank you.

[@alishanmao]

set the swash leveling. using assist, go to swash setup and zero all servos, then play with value and use pitch guage to see its zero pitch. then click on max and min. set values and check with pitch guage to set + - 12 degrees positive and negative. then go fly and test

[@modgemodge5168]

what is ATT fashion? what is this used for?

[@alishanmao]

Its like sports mode, in simple words

[@fpvtechnology837]

Hi! on my t.rex 470 with the flywing H1, when I activate the switch on to make the motor turn the blades suddenly spin too fast and the tail rotor does not have time to compensate the torque. so my helicopter starts to turn on itself for 2 seconds. How to lower the engine speed on the software so that the engine speed to bé more progressive? Franck from France

[@alishanmao]

I believe it should be in your ESC settings. set it up for a soft start. you have to read your ESC user manual and program it for soft start. its easily done using radio throttle and moving it. but you must read your ESC user manual and make right adjustments. if you have ESC program card thats even better. have fun buddy. Hope you are safe. we are watching so much chaos in France. whats going on?

[@fpvtechnology837]

@@alishanmao Thanks for your info. I will check m'y ESC setting. I am safe in my area bacause I live in smal town. But in bigger cities it's chao!

[@keithdriggers9578]

Ali, I have the v2 uh1, that has the 3 blade tail rotor, OK, I switched out the 3 blade for the 2 blade on the FW450, it was too long the main blade just barely hit it,, so I cut 6 mm off each blade and made sure it was balanced Do you think the tail will hold at 60% or should i put it up farther? Thank you for your advice.

[@alishanmao]

well you can only fly and find out buddy :) in fact when I switched my 3 blade to 2 blade. i did not cut main blades. i just flew and it was fine. though close but no issues

[@keithdriggers9578]

@@alishanmao Mine were definitely hitting, i think the V3 has a longer fuselage, I'll try it out this week and see. Thanks Ali.

[@alishanmao]

@@keithdriggers9578 did you use quick release main rotor?

[@keithdriggers9578]

@@alishanmao No sir, stock Flywing

[@paulsexton8945]

So can u replace 3d mode with att mode instead of 3d

[@alishanmao]

Yes of course

[@paulsexton8945]

Thanks again

[@dradden1556]

Hi Alishanmao. The att mode in my airwolf works perfect. But in my Huey as soon as I switch to att , it don't hold altitude. It starts to desend like landing. Why do you think it's doing that?

[@alishanmao]

Check and fix the ATT values on flight mode switch. then re calibrate your radio sticks using radio menus. then connect your heli to computer run assist program and do the sticks calibration again. fly and see

[@dradden1556]

Ok. Will do. Thank you very much. I really appreciate all your help

[@dradden1556]

Hi A. So I recalibrated the hueys transmitter and on h1 assist. like you said. It's flying nice but when I switch into att , it still wants to immediately start to descend . I'm wondering if maybe my negative pitch is out of adjustment. I did replace a servo . Maybe it knocked it out of correct pitch. I'm just not sure what to adjust to zero out the collective pitch so it hovers in hands free in att. Like my airwolf does . I'm just lost . Lol. I really appreciate your help too

[@alishanmao]

well that descrribes why you are having issue. after replacing a servo you must re do the swash centering and adjust blade pitch with assist and pitch guage.@@dradden1556

[@dradden1556]

Yeah your right. I just noticed one of the blades is centered on the tic mark and the other blade is off just a little bit. I guess that's why I didn't notice before. Thank you

[@adilsondejesus6694]

Bravo parabéns

[@alishanmao]

Thanks buddy 👍😀

[@nv180399]

Ciao Alì...un caro saluto e una domanda..ho provato a fare il volo rovescio con il mio fw 450Lv2 ma è successa una cosa strana...il modello si è messo sottosopra...ha mantenuto quota e posizione ma poi non rispondeva ai comandi(su..giu'..destra..sinistra..avanti..indietro)..riportato in posizione normale ripreso a funzionare...ripetuta l'operazione più volte ma sempre uguale...ho sbagliato qualcosa?..si accettano suggerimenti...mille grazie

[@alishanmao]

I have never met such issue. its sure kinda very strange. it could only be a glitch in the system. try to change the inverted controls to professional in the assist and see if it works or not.

[@nv180399]

@@alishanmao GRAZIE...sempre gentile...

[@nv180399]

@@alishanmao ciao Alì ho fatto come tu mi hai suggerito passando da easy a professional ma non è cambiato niente...il modello rimane in hovering sottosopra mantiene la posizione ma i comandi non rispondono...probabilmente è un difetto del software...pazienza lo terrò così ciao..salluti

[@RGCbaseace]

Hmmmm that didn't work for me acted like 3d mode I checked 3 times 1400 on the middle switch Just like you showed The lady can sure come down fast But not fast enough I flipped it back and she stopped at about about 1/2 a meter agl ?????

[@RGCbaseace]

I'll try and look in the configuration software see if it changed or is otherwise differently set

[@RGCbaseace]

Still the same my puppy drops did you change the spring in the radio or change any pitch settings

[@RGCbaseace]

Ok, I think I got it. I did a reset to default settings in the sw, and now it's different. Now there is no collective difference between gps and atti mode

[@alishanmao]

glad you sorted it out.