All About BMW Scan Tools (INPA, BMW Scanner 1.4)

This doesn't cover every BMW scan tool out there, just the two that I happen to own.
You can get BMW Scanner here:
goo.gl/BFZoAl
You can get a K+DCAN cable here:
goo.gl/CoE1to
To find out more about DiS and Progman:
www.bimmerfest.com/forums/show...
This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

[@hardys9274]

dude, you are the Bob Ross of BMW repairs. When I get angry at my tool, the BMW engineers or whatever doesnt work, I watch your video and come back to job, confident I can do this. Tks

[@carloslargaespada6051]

Hey 50's kid, I'm a big fan of all your videos. Than you for all you do!

[@jerryprize7800]

Awesome overview, I was looking at DIS and now it's looking like INPA for me.

[@MrDanoman812]

I have to stop a minute and thank you for all the information you're putting out on fixing our 'ole favorite cars and helping us keep them on the road and running smoothly. MANY thanks...!!! :)

[@MisterAdventureGT]

50's kid i salute you ! your video helped me a lot i have an e39 and e53 and definetly you make my life easier

[@germangedgauds7594]

I love what you are doing. Bless you!

[@kirkbanton9181]

Great video as usual. your videos are different from most people. YOU are like a teacher, I really like the way how you present the information. I will buy a BMW one day, when I get it I will be very knowledgeable.

[@50sKid]

Thank you very much

[@naureh5084]

Thanks for an excellent explanation. Good work. All the best.

[@fitzmorrison3808]

Hey 50's kid, thanks for all the info on the e46.

[@CarDiagnosticSoftware]

What a good guy, Thank for sharing and your funny at the end of video.

[@emiliordache7071]

Hello. First of all I want to thank you for the content you are sharing with us, well explained diy's and great video editing skills. I am about to rebuild the disa valve, as I hear a really small rattle sound inside of the intake manifold. My question is, I can use inpa to check this? Or, when the engine is runing, I can just unplug and the sound should disappear? And if so, ecu will stock an error that will remains there even if I will plug it back? Thanks!!

[@65belair22]

you're videos are very informative and you are well educated about your subjects ! I bought the Pa Soft and I'm playing with it . I got a used LCM because my turn signals , hazard and high beams didn't work . The used LCM gave me signals . Hazards but the high beams still not working ! The one thing that changed with high beams is the indicator blue light comes on now when signal switch is pushed in , anything in the LCM coding that would turn high beams off?

[@jaykuptake]

You are awesome, keep it up man.

[@ozzyfarje]

Thank you for all the videos, you where very explicit of your choice on scanners; but what do you think about the AUTOPHIX BMW Diagnostic Scanner Tool ,Enhanced BMW 7910 ?

[@JMUDoc]

Another that must be considered is Scan Master ELM - this one is extremely comprehensive and, best off all, GRAPHS sensor outputs so that they can be reviewed after a test drive.

[@craigjulian7100]

@50sKid they're (BMW) is using something called ISTA/D and for older models ISTA/P (used for programming mostly)

[@ggua92722]

I’m a new subscriber. Thank for the DIY videos.

[@garyyung1297]

Awesome video, I just bought two obd2 read scanners for code reading, Autel Maxiscan MS300 and MS509 for factory specific code reading. Works well but cannot do reprogramming like changing the values. The Autel tablet models, higher end units can check for like power window malfunction and steering angle sensor all that. Your units are great value, I should get them too. Great video thanks

[@MattTheriot]

This is so damn helpful, I got INPA working on an xp virtual machine, which I had to patch together from several sources which wouldn't work on their own. It's useful, but any information where I can get explanations of what the values mean is great.

[@50sKid]

Yeah I don't even know--gotta speak German, I think. But take a look on the message boards, e46fanatics and bimmerworld and bimmerfest and others. There are boards specifically for coding. It's never been worth my time to really look hard for more info on INPA--I just plod along and figure out what I can manage.

[@robertcoyle9071]

@@50sKid too bad you can't copy and paste within inpa rather than manually typing in 20 letter German compound words into Google translate. I use it for live data but its much easier with ista or PA soft.

[@davidnguyen5028]

Hi Jason, I need help with my e60 M5. I’m trying to determine what code 279D is, it sounds like it has to do with my electric fan final stage. But I’m not sure. I’ve read online that it could be the relay. Or some electrical problem. Here’s why I think that, I just changed my gas tank vent valve because of code 273c. I cleared the code but it came back on. I also had code 2b52, for electric transmission oil pump, I couldn’t locate the unit next to my 6 speed transmission. So I clear the code and it didn’t come back on. I talked to the part guy at the dealer he said the unit is on passenger side of the transmission I checked but didn’t see it. Now, I’m not sure what to do. The car has 93K miles. I don’t mind changing parts but when the part is changed the code should clear out but it didn’t, I’m thinking it could be an electrical problem.

[@royjennison3916]

dealers have not used DIS for about 8 to 10 years , we use ISTA-D . for diagnosis and programming too .

[@ahmedibrahim5_]

thank you so helpful can i use inpa software by bmw scanner cable or versa?!

[@AndiSelaj]

Just to clear up the general confusion that surrounds the Fuel Trims: Adaptiv Fuel Trim - Low engine load - Low engine speed Multiplicative Fuel Trim - Medium engine loads - medium engine speed Both of these are long term and integrator is the short term fuel trims. As for WOT operation the engine doesn't use closed loop, but defaults to a pre-programmed map for WOT and runs the engine rich.

[@luciferfluerdelis4974]

very good videos , you have helped me get over some of the hurtles of what to expect while working on bmws and what others expect and what they get. you give enough. so far i have inpa, running on vista ... I mite try DIS or PROGMAN because they still un on 32 bit operating system, and the insta d and insta p new software requires more then the xp and vista does to operate, I mite dual boot windows 7 and vista on separate hard drives, just boot log into what ever one i need. Because of your vids I also got AK90 and key cutter.... and have cut the key and stuff already, the things we can do and take for granted I tell you. What got me into BMW, I got 2001 x5 .4.4i e53, I LOVE IT. Been car nerd kinda, so why not right. hopefully all is well with you. Thanks again

[@robertcoyle9071]

Are you charging for the keys? And if so, how much. I'm trying to decide if I want to buy a cutter and how long it will take to make back the investment. Lots of BMWs in my town. I just ordered the AK90 and a blank for my own car but didn't get the EWS 4 adaptor since a quick ISTA scan tells me I have EWS 3.

[@luciferfluerdelis4974]

@@robertcoyle9071 get the cutter and ten blanks... Its worth it... I dont cut keys for anyone yet.... Im still practicing . but i use the ak90 to program new keys

[@robertcoyle9071]

@@luciferfluerdelis4974 I'm certainly getting one. VW and Audi use the same key style and I called 4 locksmiths until I found one that can do them. $65 just to cut. Thats robbery! People around me have no other choice but to go to the stealership. And in my state they don't license locksmiths. Cut 5 keys at $35 a piece and it would pay for itself and I have the stuff to program EWS keys which I could charge for. Lots of German cars in my town.

[@robertcoyle9071]

Oh and all the diagnostics and AK90 SW run fine on Windows 10. No need for 7 or XP

[@equitygenius]

Big fan, Thank you for giving the courage buy my 1st E46. I am at an impasse and can't get support from seller with the BMW Scanner 1.4. I have a Widows XP laptop and think I've been installing the software correctly. No issue installing the software. Nest step - 1st connected hardware OBD module to car then connected cable from OBD to laptop which opens install assistant that recognized new hardware and followed prompts. That's where I'm stuck. It appears to be looking for a driver it can't find. Your input is much appreciated. Thank you again for all the great videos

[@ckegman6103]

would bet XP not supported. Upgrade to win 10

[@equitygenius]

@@ckegman6103 Thanks for your response. Unfortunately it does not work on Win10. on that laptop either. Seller states that it is only compatible with XP. You get an A+ for effort though. Cheers!

[@revokedxr689]

a note to all pre-2000 owners the only way for any of these to work properly is to make sure you have "jumper wire hack" for the diagnostic terminal under the hood!! i spent many months with alot of different scan tools. but none had FULL access and most wouldnt function fully until i jumped the wire with a 1" piece of wire under the diagnostic cap found the video on youtube accidentally but THANK GOD I did !! everything works now :)

[@sandeepgill7607]

Hi Do you have link of that video I’m struggling to find fault in abs and Srs 2000 e46

[@jeremyboucher200]

Hey 50s, are you still at it on the e46's? or have you moved on to newer cars?

[@julianmcalister3247]

If you could do a video of how you set up the drivers on your computer, that would be awesome. I got this scanner and was excited about doing some changes just to find I can’t find a driver for the actual scan tool itself. I’ve got the software ready to go, it’s the scanner that keeps saying it doesn’t have a driver for. I’m not sure if it’s something I’m doing or the software and tool isn’t any good. Mine looks just like yours but doesn’t have the sticker showing a BMW on the front. Any advice?

[@carlose0826able]

Can you also reset the seat belt light ?

[@motoman000019]

Changed the valve cover gasket on my 2007 328xi now need to reset the Vvt , which software and wire would be best thanks, great video, and what version of windows? Thank you

[@mundtdog]

What would be a good choice for activating ABS and low pressure fuel pump on an E90 2011 335d?

[@seansavage4766]

Hey 50sKid! Your Vanos rebuild really helped me out..very much appreciate your videos. Curious, just got a 'service engine soon' light on my E53. Will one of these scanners read what caused the light? How do I find out what is supposed to be serviced? Thanks very much!

[@50sKid]

Yes it will

[@seansavage4766]

Thanks dude!

[@bobrice3219]

Does the INPA "activate" section you were showing allow turning on/off the cooling fan?

[@ianyoung6829]

HI 50 kiD WHAT Scanner would you recommend for the new bmw, i have 2 x6 2011 and 2010 3.5 and 5.0, your recommendation would be greatly appreciated

[@katherinej51679]

Thanks for this! We have the BMW scanner and bought a disc bc I’m computer illiterate. It will scan but after the first two lines, everything else says it’s not available. Did I install something wrong? My son is trying to diagnose the convertible top not working on his 2000 323ci. Installing the software has made me crazy. Lol

[@niklaskhathutshelo]

Keep up the good work man, you are saving us a fortune, maintaining these cars wouldn't be economical without people like you. I want to be out of context slightly, what's the difference between K Dcan cable with and without switch? Which is the one suitable for BMW 530d e60 2004? TIA

[@50sKid]

On some older cars the cable only works if two of the pins are shorted together, so it just depends on the year of car. Get the one with the switch and then you can short it or unshort it as needed

[@paolenz]

50skid, I am having a level control system malfunction. Been to two independent dealers and they could not figure how to recode this thing. e70 X5. I need to reset the ride height. Does this have that capability on any of these two scanner?

[@gnomebmw]

50's kid how do I clear adaptations with BMW Scanner? (I have used it for basic troubleshooting for years but I don't where this specific feature is located)

[@theresafallon4826]

I put a new(er) transfer case actuator arm on my 2011 BMW X3. The dealer wants $2,200 to replace and reprogram. Can one of these tools reprogram it?

[@DanBarrett-pb2ux]

I really enjoy your videos. Have you experienced where the OBD provides power to the scanner (all lights light up once plugged in) but no data comes to the scanner? I've tried different scanners with the same experience; the lights on the scanner work (it's getting power) but it can't connect with the system to provide any information. I tested with a multimeter and get voltage at the port connections. I cleaned the ports. Still nothing. Any ideas? Really appreciate any help. Thanks!

[@baims8367]

50s kid u do a nive job with ur vids hats off. I'm looking a 08 335i habe to turn car off to shift into reverse amd back on then off to switch from reverse is this soiloineds or worse please help thnx so much

[@mrsgarcia7324]

i bought carly off amazon and it works great i even coded my alarm system super easy also used my cell phone no laptop

[@Shamus71]

Victor Gallegos yes it will, both Apple and Android.. it’s definitely nice to have with you on a long trip. I was 1200 miles way from home and my car’s electronics started flipping out with a message on the iDrive screen that said “electrical problem, do not drive car”. So I pulled out the Carly dongle and connected to my iPhone and determined that it was my RDC.. aka tire pressure monitor module which took several other modules down.. so I googled where it was and unplugged it.. all good for the trip home. It’s definitely good to have a scanner on hand with these newer cars.

[@luisjpavon]

Can you reset the airbag signal light with this? I just disconnected to replace the speaker and now my light is ON, or you have any idea how, please let me know!!!

[@gladmarchatlein8164]

Hi mr.50sKid Do they come with the possibility for wiring diagram ? Thanks. Regards.

[@sgfreak96]

Question, for the vanos. Should those numbers match up 100% exactly? Mine are off in small amounts. I can upload a video if you wouldn't mind checking.

[@duayduay1232]

Is there a avaiable tool to programm a e46 to beep if the key is inside the ignition keyholder?

[@FlySindbad]

Hi When you start INPA... F3 .... there is no “Functional Jobs” ?? I have the same issue with me X3 E83 ?!? Why?? Functional Jobs now show in some models?

[@anthonypeterson6128]

which INPA scanner should i get for my car 2001 325I i noticed in yiur video you can check and control the fuel injectors

[@funwithleniolianddomi3065]

Do you know if the battery can be programmed with any of those two softwares? 2003 x5.. 4.6is Thanks

[@d1prospect15]

Just picked a e46 and have been unsuccessful finding 1.4 software. I’ve bought 2 different ones of eBay and neither have worked. Any help would be great

[@mehdi080607]

Are you able to check the engine oil level using INPA software?

[@bellasmiles6878]

50's Kid, which one of these I should buy to reprogram new tmps?

[@23fomenter]

What do you think about foxwell nt510? Have you ever used it?

[@ENDTIMEsVideoLibrary]

Hi, I have a 2001 BMW 330i. I am told that my transmission needs to be changed because the transmission computer isn't working. By 2 BMW / German car repair shops. Is the transmission computer inside the transmission to where I have to change it or can I reprogram or purchase in transmission computer separately? I would really appreciate the help in clarifying this thank you. And thanks for your videos.

[@isrealperez9069]

So I what windows program are you using XP 7 8 or 10 and and as well as the bits 32 or 64-bit I just also need to know do you have a Oracle on how to install this right

[@venkiee]

Does the BMW scanner cable + software work on F10 or F30 models? can it be used to detect the actual mileage of the car (I mean if tampered)

[@quartznation9499]

Which one can reset the battery adaption..when you change out the battery it needs to be reset as you know..and which one can also program the locks to automatically lock after driving from a start position? Thanks cool vid

[@straight6petrol67]

Quartz Nationz The e46 model in this video does not need to be coded. The e90 does however...

[@IvailoDombev]

You can code it with NCS Expert. A lot of information on the forums - bimmmerworld, e46fanatics. It's easy if you know what you're doing. For the NCS Expert you will need the K+DCAN cable with the INPA software(They come in pairs)

[@donyel30]

Quartz Nation

[@TheGoat350]

Hey man Love your channel. Helps me alot! Question Do you have a link for an english version of inpa. Mine was supossed to be but not. Ive tried changing the files to english spelled in german too. Any help you can afford? E46

[@ZedxLeng]

Just wondering if you can "delete transport mode" on an e85 Z4 2006 using these scanners???

[@matthewscheffler3518]

hey what do the 7 and 8 pins look like in the cable is it a 8 pin delete model a 7 and 8 connected or 7 and 8 independent.

[@jeremyjennings8894]

Can you reset throttle adaption valve reset in which scanner ?? I have a 328i e46 with cable driven throttle body, thank you advanced!!!

[@larryburdick7154]

What sort of diagnostic cable and software would I use for my 2016 328i 2.0 ltr. I believe it's an f30. Base sedan.

[@jdeday]

Will the BMW Scanner read the PDC module and identify the faulty sensor?

[@BarbaritoAdolfo777]

How the oil and service intervals can be set or modified with pasoft for like 7000 miles instead of the long 15000??

[@patrykzareba6846]

Hi there I like all yours video I learn a lots from yours videos.... What do you recommend to coding new LCM IN MY E39. ?

[@tomshire5152]

I successfully coded my 2002 e39 LCM using BMW Scanner 1.4. and following these instructions: www.zhpmafia.com/forums/showthread.php?7663-How-to-code-a-used-LCM-with-PASoft-BMW-Scanner-doityourself

[@warcry1498]

Hey 50s kid I have a 325 an did a 330 swap do u kno how to flash the 325 ecu to b a 330 ecu?

[@julianmcalister6865]

With the INPA software, “not sure if that’s what I heard, can you check and listen for the clicks of your transmission solenoids?

[@konel6608]

Hello. How we can see the Error first date appeareance on the car? with bmw scanner 1.4 i want to see when has appeared the error for first time?

[@Cappadociatourguide]

Please give information about 20 pin E36 OBD scanner. On the internet there is 20 pin cable, can we use them with standard bluetooth scanners?

[@louprimo6062]

Hi there.. Will the IMPA Cable work for a Mini Cooper R53? Is the software compatible with windows and apple or just windows? Thanks.

[@puttitat2851]

You do realize that BMW scanner van code as well, right? Just double click the module shortcode. It's SO easy with that software.

[@87Andree]

with inpa there is program NCS expert that allow you to program/activate blocked functions in your car like DRL lights , panic mode, alarm, and lot more depends what year car you have and units installed in car

[@50sKid]

True that, I forget about it because I had always used Progman to do that (and to a certain extent, bmw scanner can do it as well).

[@CruddyPeak]

If you want to get a dcan cable, it's very important to get one with a green board. They come in green, white, and blue. The ones with the green board are so far the most reliable. My white board cable failed on me (burn marks).

[@50sKid]

good to know!

[@JayJayHuman]

im stuck in transport mode.....my radio turns off and central locking dont work.....need help with installed inpa....ty

[@SultanSiney]

What is the difference between "Fault currently present" and "Fault currently not present" ? 3:20

[@franclozanoriv]

Can these tools be used to synchronize the DME and the EWS 4.3 in a 2006 BMW X5 3.0i E53??? I have a no crank no start situation after I "rewrite" the EWS 4.3 with the AK90+ & VXSCAN Adapter, adding a new key. Any idea to fix this???

[@babblingidiot7903]

do these scan tool show the transmission temperature during ATF change and refill?

[@IsmailRidi]

Hi 50sKid, from where di you get that version of INPA in English?, the only good working version i was able to find was in German

[@50sKid]

Search the forums, bimmmerworld, e46fanatics.

[@pAnchocrack92]

Which scanner can i use for my 1994 E36 325i obd1? The 20 pin rounded one. I need to check a faulty abs sensor.

[@chadjabes6141]

Will this work on a 2005 BMW x3?

[@evelynedwin2472]

Hey @50skid will this software/device work on a 2009 Mini Cooper (R56)? If not, can you point me to one of these that would work?

[@vincentbenavides6624]

I got a question. I bought my e46(2000) 323i earlier this year from a guy I know in my area, it was dirt cheap cause he moved out the country for work. I want to work on my car but every time I have to remove the battery, I know theres a thing about resetting and inputting the engine code. how can I do that with little to no information. theres no manual. all I got is the title and keys.

[@uptownphotography]

Have you ever used or any opinion with the....Bavarian Technic Basic Cable. I am trying to figure out which one to buy for a Twin Turbo 2008 335XI E90 model.... Thanks and nice clear video...

[@50sKid]

never heard of it

[@227lazer]

Should both my up stream o2 sensors have the same readings. I have p2098 and p1111

[@regieboix2]

hi-i have an bmw e39 --525d touring--2001 yr----I like this tool but do u know if it will tell me why my elec windows/mirrors don't work?. also will it test rear air suspension as I have a warning light on for that??… (its the self levelling warning light) will it do bi directional stuff what ever that is?. thanks in advance-dave from uk.

[@lonniemaize6718]

INPA IS WORKING GOOD WITH MY SYSTEM, M52 ENGINE, CODE 114, KR ADAPTIONS STAY AT 0 WITH WOT AND WITH OUT TOUCHING THE PEDAL. DO YOU HAVE ANY EXAMPLES??

[@owneroperator9611]

i have a 2000 e46 and dont have an optical drive. if i get the cable bmw scanner or K+dcan device, is their a way i can get the software on a usb drive or download it, great video info, thanks

[@ishmaelwhite15]

I download inpa with same wire and I keep getting api job error or no search results any ideas as to why I am getting this when I try and acces inpa data. Also is there a way to use inpa to reset start code or rolling code so my car can start I am getting start no crank issue.

[@TD-um5ym]

I have a X5 E53, can it clear the Inactive Suspension Error code?

[@zpzp96]

Awesome video as usual. I would like to know if one of these can turn off my Daytime Running lights. My inner bulbs are on during the daytime I guess for safety, but I would like to turn them off and dealer quoted me 180 dollars to just turn that thing off. With the menu coding, I assume maybe it could be turned off using one of these cables? Thank you

[@50sKid]

I think the bmw scanner 1.4 can do it.

[@50cts]

INPA never was a tool for BMW dealers. It was and still is a tool to be used in BMW factories.

[@isrealperez9069]

What os on you're computer for this to work

[@InobuZ]

Some things you don't want to activate. I think you can burn the injectors out when there's no fuel being circulated.

[@regieboix2]

hi any idea if it which scan tool will do my car BMW E39 TOURING-2001-525D?? I have a warning light on my dash, its for the self levelling air suspension. my suspension went down a bit over night off side rear... I replaced the rear 2 suspension air bags, replaced the valve block manifold on the suspensions compressor as it was leaking air slightly, replaced 1 of the suspension ride height controllers as it was broken. . after replacing all the parts the suspension is working fine and now stays up, but my problem is:::the dash light is still on the dash !!... be able to scan my e39 touring ,year 2001 as above?. and will it be able to re callibrate the rear suspension manually and then turn the dash light off?. any advice appreciated. many many thx dave

[@timboyle3114]

How about doing an update for ISTA and the other ODB tools you have used on the recent uploads? I've been using BMW scanner and a basic ODBII WIFI reader for years but the scanner has recently become unreliable in connecting, so I dug out INPA again, but all my errors are in German. I tried to install ISTA - it seemed to install successfully, but it will not connect - how did you get it to work? Also do you know of anything useful for an early ODBI E36?

[@alienbox440]

hey can you help me with the cable? the K+DCAN cable work with bmw scanner software ?

[@raramr.8453]

Is 220$ a good deal for a camshaft position sensor for the 325i01 model 2.5 l?

[@In-A.i.-We-Trust]

Can i test the starter & alternator from this ?

[@MindHunger]

There's a menu somewhere where you can check all your dashboard switches. Did you find that?

[@craigk7271]

So what are you hooking the cable up to hello

[@anthonypeterson6128]

First off i want to thank you for your very helpful videos they've saved me a ton of $money 2nd I need your help i have an 2001 bmw 325i with cylinder misfires in 2 and 3 cylinders P1345/P1347 with fuel cut off Ive changed the valve Cover, Plugs, coils, Injectors, intake manifold gasket, Dissa valve, and throttle Body O-Ring checked for leaks in boots still shows codes next i will change the fuel pump and fuel filter any suggestions will be greatly appreciated thanks in advance