All Motor Song Brings Men to tears! AM Phong part 2 (headphones⚠️ )

[@xcracer87]

Phong wears ear protection as a fashion statement. I love it

[@JesseCombsTwiZtedCheese]

I used headphones and pepper spray for an immersive experience

[@dfox7777]

Haha!

[@wevezard]

We had same issue with our dyno. It's the hard drive skipping with the harmonics from certain cars. Switching to SDD completely solved. Love your work guys.

[@jovannylopez8332]

Warwick Evezard +1 .. SSD fixed dyno down here in miami 💪🏻💪🏻

[@DjSubstain]

I'm no dyno guy, but i know computers and that's what i was guessing. I was going to say that having the computer in the room next door and the cables thru a hole in the wall would also fix it. But if a SSD is all it takes then I would change it out.

[@colesteven1123]

Didnt even know people still used HDD

[@_Professor_Oak]

@@colesteven1123 SSD have only just become somewhat affordable in the last couple years... for instance most people still have an SSD/HDD combo in their PC builds.

[@colesteven1123]

@@_Professor_Oak i left HDD the same time i ditched 775 socket processors lol

[@DashnCars]

It goes without saying, if *Phong* is in the Title it's going to be a bad time for headphone users.

[@henryhammond882]

I turn it up, love every second when phong's car or phong is on the channle

[@matlemons9260]

Its sounds so sick with good headphones though!!! The mic doesnt hold up to the sheer blast its making!!

[@_Professor_Oak]

It's too loud for the PFI microphones lol

[@douggiedowdallki885]

Yes sir lol

[@jean-francoistanguay6304]

Ya hahaha for HeadPHONG user! xD Awsome sound, but we want to you guys have a better mic :D

[@necrogami1]

We dealt with this in the airline industry, Hard drives have major issues with loud noises especially over 130db make sure your system is on solid state, if it's not upgrade it to a ssd and this might help. I do know we would have hard drive failures around loud turbines.

[@Russell_and_Rosko]

Good info there.

[@mannys4539]

That's a really good idea!

[@UsaRubber]

The high db Vibrations could cause the read to bounce is probably what's happening here. SSD's are so cheap. They could always run their system to a NAS that's in another room. But SSD's would simply be cheaper and easier.

[@bryduhbikeguy]

I wondered if it wasn't the extreme vibrations,magnetic wave ,and frequency,along with no groundings for the vehicle to platform.?I've noticed visual distortions in some cameras when exposed to such.(Not theirs,but in other's such as mine,without anti-shake).I'm sure their computer is well grounded,but how well are the signal wire shielded?Thnx for any answers.

[@alecfleming373]

So since this is a vibration issue with the computer components, would putting the hard drive in another room fix this problem the cheapest and fastest?

[@skylerb7103]

Phong and Brent are some serious OG’s mad respect to those dudes!

[@jdmdang]

hell yeah!

[@sidbilly4663]

PHONGS OUTRO WAS THE BUISNESS😎.. ALWAYS WITH THE 🔥🔥🔥🔥🔥🔥🔥😃😃😃

[@sr2Xvet]

I think I speak for the KZbin world and we want to see more of phong on you’re channel or talk him into creating one.

[@DjSubstain]

That is what we want, but is it what Phong wants?

[@_Professor_Oak]

I don't think Phong is that kinda guy, I think he likes a humble life without putting himself out there too much.

[@ogsamosa]

that was too sweet at the end with that outro Phong is the maddest guy, love his knowledge & little tips he shows us when building an engine

[@sr2Xvet]

sam steeno hell ya phong is the dude brother.

[@alecfleming373]

Phong needs a media manager then... Let him focus on what he is good at and follow with the camera...

[@justinwheat5657]

Phong is an amazing builder/engineer/mechanic. Just a overall humble guy. The dynamic duo

[@shannonsisk]

I love when phongs car hits the dyno

[@clowmartinez]

One thing I have always loved is y’all ain’t afraid to show your best friends enjoying some beers making cars go fast but at the same time when comes down to business y’all put everything aside and get to work 110% keep it up guys y’all are what keeps people like us going!!

[@Regal_Civic]

Hey Brent I just wanted to let you know that I find your videos inspirational. I look forward to the upload, because I find it the most uplifting part of my day. Thanks for sharing your stories with us, the PFI family is huge and I'm glad to be a part of it. I hope that someday I can meet you and it is my goal to have you tune a Honda that I've built.

[@Taluvian]

Love Phong's all motor challenges. Amazing he is getting that kind of horsepower.

[@Prado805]

Taluvian staying away from that coronavirus!

[@HarryTwatter]

it's on alcohol so yeah it can make some power

[@gasscooterdude]

Gotta love that M-5

[@CatfishAlley]

They are maxing out everything and barely hitting 300...I wouldn't exactly call that massave hps...lol

[@_Professor_Oak]

@@CatfishAlley Come on man, 50%~ increase NA is impressive, in fact it's more than that because I doubt those motors make 200 @ the wheels from factory. 324whp and they're nowhere near done...

[@aaronpowell4885]

R.I.P. neighbor's quiet afternoon🤣 Always stoked when I see a new PFI upload!

[@cbrackin531]

Smashing that like button before the videos even playing. Keep up the great work!!

[@CJE2007.5]

There's just something about Phongs car that brings back so many memories. I'm an a American muscle guy but back in the mid to late 90s early 2000s we ran rotary engines in our dune buggies and we used to call them Rpm unlimiteds. The sound of an engine screaming at 8 to 12k rpm is unreal and phongs car just brings back all them memories of the parties during Thanksgiving week and the thousands of people with awesome rides and here we were with our yz80s 125s and banshees and rotary powered dune buggies screaming up the dunes what a blast. Then i got married had kids and they took priority. Wouldn't change it for the world though.

[@johnathankneale9608]

you should build a fan out of a vertical ac blower motor with squirrel cage 110v to pump out your exhaust while on dyno. no more crying no opening door just a flip of the switch.

[@danielarrowood4463]

PFI Speed just to let you know you guys are one of the only ones I do no skimp through the videos and love all the builds in how you guys give our info

[@benjaminhedderly4495]

You guys have some serious collective knowledge!!!! It's nice to see humble Without the arrogant attitude like many other engine builders and tuners have... WELL DONE GUYS 🍻

[@stlnsoul]

aye, phong with the modelo in hand, cheers bud!!

[@christophermendes565]

You guys need to get Am phong to start a youtube series guys he's such a smart and positive dude and his builds are pretty radd

[@TandemLife89]

Please please please have Phong do the outro's to all videos from now on...... He is honestly to humble to be human.

[@sanfordrhudy774]

Gotta love it when Phong's engine takes it from a roar to a scream! Bet the static energy in that building was unreal!

[@markwilding5108]

Cover the dyno box with some foam to clean up the runs. We had issues with our dyno not grabbing runs and when we insulated the box it started grabbing every run with no issues.

[@papafranku1867]

I’ve been waiting for this video for a minute now

[@thekodanator]

Approximately 3089 minutes actually, if we're counting since the most recent video two days ago.

[@papafranku1867]

D A that’s impressive

[@christiandevos9280]

Lol a nice loud all motor car is the most exciting!!!

[@papafranku1867]

Christian De Vos damn straight

[@zachallen7092]

Hell yeah pfi late night upload I love it. Let's go!

[@DJ-ANZ]

love hearing that Vtech Sing like a bird in the morning baby!!! Sweet ass ride Phong !!! Love that CRX!

[@bobbyholesa4329]

When u find yourself a few beers in got pfi on the phone and all motor phong on the tv lol never disappointed watching all these guys over and over you brothers are awesome

[@alejandroguillen1159]

Thing will be in the 9’s for sure ! IPG parts built a all motor crx and man I’m happy to see another. Can’t beat that all motor feeling man.

[@superconscious.]

Phong killz it always.....even the vlogging not bad, the first outro was good enough Brent was just getting payback.

[@TmoneyTheUce]

Man look here. Phong is one hell of a guy man frfr. You can see the passion when that guy gets down. So precise yet so cautious. Who else you know takes off a Type R valve cover 3 times and still looks brand new. You know when they say “Jack of all trades master off none”. Phone is the Master that jacked allllll trades. #PFI #BoosterBOIZ #PhoneFTW 🔥🔥🚀🚀🤙🤙🔧🔧🖤🖤

[@Cekmore]

YES ! I was about to be bummed in the bum! PFI Fam is super Rad! LET'S GO! 👊🍻🐈🔥🔥🔥🔥🔥🔥

[@PwnyDwn]

Is it just me that really gets into Phong videos more than others? There really is something about the love and care he puts into his engine that makes it just sound that little bit more special. His car just seems to sing the song of good vibes for car guys. I'm not a honda guy by any means. My hot rod is actually a F150 with a 518 big block. That said this little K series makes me grin ear to fecking ear. keep giving us more Phong content PFI :D

[@oikkuoek]

When building a high-revvin' engine, dry sum system with scavenge pump is my advice for today. Scavenge pump is able to create a vacuum inside the crank chamber, and therefore pull out all the escaping gasses from the compression chamber. Also dry sump system is easily cooled, can contain as much of oil as needed, and if built properly, can be easily maintained. When using a lot of fuel, especially methanol, the oil gets diluted fast, and then kill the motor.

[@hupondio]

The hard world of tuning NA engines moving Big cams forward and back is so dangerous, you have to really know what your doing, seeing Phong do that delicate job was amazing. Good Work guys! Love all Motor stuff in my favorite channel of KZbin! Yeahh

[@DUDEfreestyle]

Like you guys mentioned in the last video, watching this All Motor machine on the Dyno is for more exhilarating than a 600+ HP turbo setup. I can't even imagine what it's like in person. Keep up the awesome work and let's go All Motor Phong! get into the 9's!! God bless 🙏

[@MoreBo0st]

Phong is such a cooler dude and man is he smart with the crazy shitnhencomea up with. Id love to watch more of his work and learn myself.

[@LarryYaw]

Gotta love Phong. He is so chill.

[@adams071]

Love you guys ALOT. You guys are super wholesome and super down to earth cool dudes. That is what I freaking love about you guys and why I continue to love watching your videos. One of these days I would love to meet you guys in person and give you all a big loving hug. Hope to see you guys soon in Maryland for an event!

[@timthomas5395]

phong is the definition of all motor dreams! respect !

[@k5ryannc]

Phong is awesome! Lots of hard work in that car! Love the retakes!

[@dfox7777]

That thing is a monster! And could be built by by a better team. Y'all's energy is always so great and y'all just feed off one another.

[@xshinigamix4515]

I would like to have a job with people like you guy that always teach new things and love cars, nice videos!!

[@SunShineCoastStoner4]

Hey Phong, not sure if you read these comments but that CRX is above and beyond! great job you've done. To PFI Speed, you guys are such an amazing inspiration i love it, keep up the AMAZING work

[@Indiecoresb]

Phong and Brent i seriously love to see you two together and killing it usual! cant wait for part 3. Have fun this weekend in Texas!

[@strangehappenings8961]

Hell yeah man I love these videos, Phong puts together some really awesome machines! He really brings you all together whenever he comes around with these things. Keep up the awesome content!!!

[@gabrielrace3532]

12:27am in grand rapids, michigan and pfi drops a phong video, I think yes!!!

[@allenl9031]

No turbo, no problem, it's Phong time!

[@bumbaclot77782]

hell no i love listening to Phong's cars with my headphones, that beautiful NA ROAR, AAAAAAARRRRRRRRRRRRR! keep making amazing NA cars Phong much love and respect

[@derkstruckauto8370]

After the adjustment to the cams the car sounds so much better. Like it its about give that sauce to someone!!!

[@hiramrodeiguezjr.8815]

Wooo!!! Great job all you guys but especially Phong. Great build I love seeing your cars and you with your awesome positivity. Can’t wait to see the Phoenix and what you have planned. Great job on the outtro too

[@tik-tac-toe7864]

I love the all motor stuff. Thats what I do. I enjoy watching phongs dino pulls. It's great. Keep up the great work!!!!👍

[@Chad93oleblue]

Gotta love Phong and it’s always great when you don’t edit out the retakes and bloopers!

[@JC-jo4yz]

Almost 100hp per cylinder without a power adder is awesome ...phong 💪

[@michaelcoss88]

Back in the day when I used to run my at GSR. All motor I did + 3 on the intake -1 on the exhaust and made a huge difference down low.

[@Bigninjon]

Love the fire ball cuts hell yeah!

[@skunkworks9-3]

1:46 no ear protection taking it straight to the head. Phongs song is romantic AF

[@ReeceRamsey]

I know you mentioned sound proofing the dyno area some more. You could do the same for the pc, pad and isolate it inside and out within a box.

[@oldfart43311]

As always a joy to watch. Thanks guys and thanks to Master Phong.

[@TomBudin]

Phong's English is improving a lot even from last year

[@justinbarrett33]

PFI.. making engines smile since 1995 haha 👍

[@bigcam250]

Its sounds so good great job phong. WE NEED PHONG TO DO A PULL IN RUBY or at least ride along.

[@fetusmccarlane9627]

Time for tea and crumpets yo!

[@drive_2_fast90]

Brent is such an inspiration staying cool even when things get frustrating!!

[@strawmannhonda529]

I love your channel, you guys do some nice stuff. I am a self built self tuned boosted CSS b series, all work done in 1 car garage in the suburbs.. my first self teaching was HOW TO DEGREE MY AFTERMARKET CAMS.......RISKY MOVING EM AROUND ON THAT COMP RATIO......

[@kingleethegamer2k524]

Phongs engine is so clean

[@kzarnold3678]

All motor phong song. Sounds so epic just rippin

[@mket_design]

Wouw that k sounds beautiful, and the hunger of the engine to greave form just awsome👌

[@droppinghertz9922]

Phong"s The MaN as alway's killin It Can't wait 2 see Some action from Cleetus and CaRs HELL YEAHH !!!

[@AnthonyBowman]

Love the custom metal bracket to hold the...Gatorade bottle catch can. haha

[@gabyg00gletv18]

Phong is so humble Love that guy

[@jameswhiteman6901]

Phong did a great outro... Xo loves to all...legends...

[@jasonschagt6527]

Great job Phong!!! Maybe try to lengthen the intake runners a little by adding a spacer to help straighten the airflow before it reaches the throttle blades, but otherwise you guys do amazing work

[@masterpayne3791]

Phong hitting us with a Johnny Dang; YESSSIR !

[@matlemons9260]

Phong and Brent are Legends!!!

[@All_OutGaming46]

Thank u for everything u do ever since I started watching your channel I fell in love with racing again and just doing it saver and building something I did have my eg civic stolen and it had just a kswap in it but I loved it but I fell out of the game when it got stolen just watching use guys makes me wanna build again I have a shell just waiting on a motor don’t know wat to do yet thank you again for wat use do

[@chadwickconley7901]

The car is a beast phong can't wait til the next build brother hell yea

[@eddiepatterson5025]

Brent for Fong 324 hp naturally Aspirated Honda on methanol no V-Tech. That’s awesome 😎. I’m amazed to see how much power you can get out of a Honda K-Series and max revving at what 8-9 grand that’s crazy 😜. Brent I enjoy the videos you do. Hope you have a Blessed One Sir. I salute y’all from Silverstreet, South Carolina.

[@eddominates]

Best outro in the history of youtubes. Hell yeah Phong good luck at c&c

[@nickfrechette19]

That is some serious noise! That DB reading must be crazy.

[@whizwhisnant]

One would think a certain dyno company would want to step in and help a channel that features their product a large portion of the time to ensure that video's of dyno issues weren't so prominent..... Keep up the good work PFI crew, love the content!

[@andrewmcintosh2702]

Phong is the man! I wish I could get my b-series head done by him.lol Just so I can say mine was built by Phong.💪💪

[@Michagan_outdoorsman_James]

this work of art is gonna be a beast, cannot wait to see some track et's

[@Universal.G]

Love cars like this. Its easy to strap a turbo or supercharger on an engine, especially large displacement engines. Tuning a 4cyl to make power takes time and talent.

[@lerrynhawke3375]

Thanks for your visit to the channel matt! Enjoy your cuppa t back home g

[@cowleysmobilewelding]

Last rip sounded so clean

[@baxrok2.]

Nice work guys, can't wait to see her run!

[@welloffthepace3127]

Damn, that thing is crazy. Looking forward to seeing the runs from this coming weekend, couldn’t believe how quick it was last time 🤙

[@cxbra]

That Phong, that Phong Pha-Phong Phong Phong... (Cisco voice...)

[@colesteven1123]

That british dude needs to move to the states U can tell he loves it

[@luisascencio3293]

Beers and working on cars.. perfect combo👍

[@Cronicncars]

You guys need an exhaust hose from the ceiling for under hood exhaust and one out the wall for the tail pipe exhaust. Wouldn't need to worry about the door all the time. Just a thought lol.

[@codyroberts4010]

Yeah that that little honda can sing!!

[@AngelRodriguez-ks4uj]

I just love this car . Hell yeah good job guys

[@adamyang5581]

i've turbo'd before, but damn N/A is something else in it's own class, i wanna rebuild one now

[@JamesYoung61]

Cheers Phong for doing the NA route, where your only advantage is port work and from timing, I did 2 stroke bikes in the 70s to early twin cams in the 80s no turbos then.

[@SirVic42]

Watching Phong adjust the cams is like watching a virtuoso guitarist change their tunings between songs in 10 seconds. A couple twists of the wrist, and we're on our way!

[@NjoyMoney]

Hahaha the intro, he nailed it :D

[@badguysrulez6655]

Phong front end harmonics is mesmerizing

[@genkill81]

Love the videos wish you guys the best of luck and it looks like phong made himself a monster.