QuaranTUNEd! She’s Glowing and making Jam! Single Cam Ripper!

[@justindastar]

flame came out that collector when he let off @15:30

[@axelchapman5548]

Yep was going to say same thing

[@r7kelley553]

Also around the 5 second mark (intro)

[@6466_Scoobaru]

Seen that too

[@Dagowly83]

Oil vapour from the dipstick hole on lift off.

[@LordTheodore04]

yes

[@ricerfreak7390]

Happy to see a Del Sol on the channel. You guys inspired me to go out and buy a Honda of my own and a Del Sol was my choice. Now I do KZbin because of you guys too. Thanks for the inspiration and for keeping up with the content!!

[@jamesfishel2413]

Hey Brent it's the fuel pump because when you let off throttle and you wrote into it you could see how there was air pockets coming on outside to the return line

[@orfeous]

I saw that air too

[@eddominates]

gurgle gurgle

[@matthewcampbell4735]

Recycled asphalt is the best for holes like that! Here in South Louisiana we have plenty of pot holes that consume cars! But it packs down and gives a good base! Love the videos! Y'all keep living the dream!

[@jimhiscott2918]

Your daughter loves dogs! That makes her my favorite person on your channel! My wife and I rescue. 135 dogs in the past 7 years and counting. Please give your daughter praise for me and that I thank her for caring for dogs so much ❤💯👍

[@timclarke1084]

Another nice tune...good luck at freedom track guys....drive save...stay healthy....

[@areaofeffect4408]

@15:31 flame from the manifold center section of the ram horn welds...

[@my2cents499]

Was about to ask if anyone else saw that

[@t00schw1fty9]

Damn lol good ol ebay

[@t00schw1fty9]

And they were hoping loose spark plugs were the leak.. damn..

[@chrisfaulhaber9860]

Agreed. I seen it too.

[@elonmust7470]

Don't think that's a leak.

[@christopherbassell423]

Your a good dad Brent..🤓Go Samantha!!! Love your guys channel!!! 🤓👍👍

[@lilredexpress8358]

Brent, you are a cool guy. You are always so happy. Thanks for always bringing positivity to everyone. We need it!

[@MegaMW2dominator]

When Samantha let the air hose go and it started swinging towards the nsx my heart skipped a beat 😂

[@Luske74]

i was like nonononononononoo ohhh it missed thank god 😁

[@driller524]

Same. My heart skipped.

[@moto4rider94]

So glad I wasn’t the only one 😂

[@CCDzine]

I worked at a nursery/plant grower in Pasadena, California and we had a long center driveway paved with asphalt millings. It melts down pretty good in the summer heat and you can compact it just by driving over it. It's a little gravely but way better than dirt. And the city was always happy to have a place to dump the millings - we had to freshen up the driveway every couple years.

[@MJTAUTOMOTIVE]

Gavin day that is Awesome that you sent the Guys a solid state for the Dyno Computer, but I love the K series but putting it in a RX7 Made me die a bit inside. Awesome build Man. Congratulations.

[@ryanismostdope]

2:15 you should build that single jingle 6th gen Honda Accord 4dr. That would be awesome to see make some jam!

[@davidring2438]

Definitely nice to see you taking a little bit of precautions there and I hope you all have a good safe trip .

[@TeamIPhone360]

10:12 I'm not the only one trippin if I just seen a Gucci man air freshener at pfi🤣

[@Zqud]

😂😂 bruuhh

[@CorruptInfinityOfficial]

Mane

[@brandonbailey1387]

Thank you guys from PFI speed for the content is awesome BRENT be safe and be cautious..

[@64dougee]

I just Love To Watch A True Fab. MASTERS MIND WORK!!!! And the rest of PFI are pretty raid too!!!

[@JMB676]

I don’t know much if anything about tuning but I do know cars n shops pretty good n to watch u guys “tune” these cars I just got say all ur custys r so lucky cause u guys don’t just tune these cars u trouble shoot mad problems to continue tuning these cars most/all shop basically come across a problem n just stop n say yea hey ur car has a fuelin issue go fix it n we will finish tuning ur car or wut ever the issue might b but u guys fix the cars as u tune u guys really go way above n beyond for all ur customers n it’s just great to c guys that’s not only great at their jobs but also love wut they do cause if didn’t honestly love wut ur doin u would never troubleshoot all these dif problems on these cars so u can punch those buttons on the computer to make the power. Great job all u guys lovin the content

[@jacchatain554]

Turbo blanket and header wrap!-) All that glowing is waisted horsepower, keeping the heat in the pipe will translate to higher exhaust gas pressure and increased turbine speed all other things being equal. Also keep from Burning up everything else close to it. Great videos keep them coming! Et al.

[@timothyhays1817]

Steam dyno? Here is a fun fact. Abner D. Baker developed the Baker Fan to provide a load to tune his tractors and steam engines. Engineers estimated that if you had the fan tuning 200 rpm. To turn the fan 400 rpm it would take 4 times the power to do so. Tune a steam engine? Yes by setting the slide valving and adjusting the governor effects power output.

[@elonmust7470]

Steam engines are amazing!

[@nick_bag]

"oh. it was just an invoice" that was super depressing lol

[@oldfart43311]

PFI puppy bandanas!! Great idea and ad doggie shirts. Sam, my wife is a master groomer and we are dog lovers. We used to show AKC English Bulldogs. We had several Bred by Exhibitor champions and showed at Eukanuba twice and invitations to Westminster. Do you have your own shop? Great to see you again. Stay safe

[@MrAnviljenkins]

What they do where I work when they expand parking lot is haul in ground asphalt from road work, spread it, and compact it with the big roller they use on highway work. it actually makes a decent surface. Long term later on they have actual asphalt put in.

[@man-e4g637]

When you like a video b4 you watch! Huge respect for pfi speed! So much talent and no drama! I dont ever think you guys will break up like most shops over loot or clout. Dope!!

[@kyebeary]

Quarantuned. That’s a good one

[@BlondiesGarage]

Glow baby glow! Boosted Del Sol for the win 😍

[@blakeaustin4762]

Blondie’s Garage when you gettin boosted?

[@rskrks]

@@blakeaustin4762 put your dirty crankshaft away

[@_Professor_Oak]

I'd be replacing that manifold asap, what a terrible design that thing is gonna start a fire lol

[@asylumental]

@@_Professor_Oak I recognize it from ebay.

[@majorkin19]

Nice man, i love seeing the single jingle dyno sessions man, those little motors can fight lol

[@elonmust7470]

They'll hold 900 hp!

[@BoostedNW]

Hell yeah, Building one myself d16 Vitara build with eagle rods and street tuned so far..conservative and it still RIPS! Might trailer it over and see if I can get Brent to tune it!! 👍👍

[@marksmith0209]

Damn that snow disappeared quickly! Stay safe guys - enjoy the extra time with your loved ones if possible, you never know when you won’t get the chance to spend that time anymore

[@davidburton6347]

Its always nice to see a Del Sol still around and running. But damn do i miss mine, i shouldve kept it.

[@andyossie]

My main concern is that if you get positive crank pressure and it pushes the oil out through the dipstick on those headers will be quite disastrous.

[@benjaminpease6181]

The asphalt plant i worked at made "cold mix" sometimes. I have used it to fix my drive way. Brought buckets of it home in the trunk lol. Super simple put it in the hole and drive on back and forth a bunch real slow til it packs and done. Not sure on the price but you can do it yourself

[@usercid640]

it's so cool to see you guys working AND social distancing 👍

[@EASTSIDERIDER707]

Asphalt grinding work well if you reapply as compaction occurs. I had a neighbor with a steady supply and kept our shared access in shape.

[@steveanderson5888]

No outro it's all good brother stay safe do not get that virus you bring smiles to my face everyday and I'm sure you give everybody a uplifting. Stay safe on your travels all you guys all shop

[@stephenbrown571]

PSCA pint size car association. LOL 😂

[@808lockout7]

Delsol .... my favorite car... love my honda del sol..no single life. Up graded to K Sawp... .

[@johnmckinney1493]

When it warms up, use recycled asphalt and water then pack it in. Its the frost that pops the pothole

[@blueonblueracingnova]

Great little build . Planning something similar with an ej9 d14 we have just got back

[@freddyrosario23]

@24:40 I almost die, watching the air fitting flying into the NSX 😬😬😬

[@603grudgelife4]

384k miles on the chassis, dayuuuuuum

[@maryannrose1329]

The reason for pot holes returning over and over is a poor base under that location. the best way to fix it is just dig down in those spots and remove the mud. clean gravel will then fix the problem premaritally.

[@LS__812]

PFI IS ONE HELL OF A QUARANTEAM!

[@thesquirrelchroniclesakare7808]

Good job Brent... Stop the spread !!! Love you guys !

[@magia5035]

Love it all you need is tyvek suits and goggles. The intro hey guys welcome back to quarantune. T SHIRTS

[@subymtdan6137]

I remember running into this problem years ago with my old dragster and it was something I had no idea I had to compensate for.

[@GuessTechSports]

Del Sols go forever.. friend of mine has one from freshman yr in highschool with half a mill miles on it.

[@_Professor_Oak]

27:14 The aftermarket head unit in the Del Sol looks about as old as the car itself, love that lol

[@anthonyrowell7853]

That manifold has a hole in the gooch, u could see it after the close up pull

[@ericwilliams2117]

I dont think it's a hole I think a spark of fire just glowed off of it

[@elonmust7470]

@@ericwilliams2117 I agree, that thing would be blowing crasy fire under boost if it were a hole.

[@chrisfaulhaber9860]

But I seen that little shot of fire at least twice in this video

@@elonmust7470 That manifold has to be super thin.. Only 1 pull and the thing was red hot and it wasnt even pushing that much boost. It takes a ton of pulls to get my manifold like that.

[@r7kelley553]

I thought it was called the tant? I guess some do call it a gooch:-)

[@MrDannyd9]

9:18 “et. al.” Is a phrase that means “and everyone else responsible/involved” It is seen in scholar papers and other citations.

[@sammyboswelldirtybrc7580]

Cheapest long lasting way to fix the driveway and parking area would be to lay it in recycled asphalt I am a paving contractor I believe that would be the best way for y’all to go if I had my equipment there all u guys would have to do is pay for the material and I would lay it out and compact it for yall

[@hdrenginedevelopment7507]

I’m surprised more people don’t run an oil temp gauge. I’ve got a probe in every one of my oil pans and the cars without an oil cooler don’t take much extended beating without hitting 240°F+. My standard kit is wideband, oil pressure, and oil temp.

[@mattgraham1983]

What the hell happened to Sam's car... ruff as guts 😂😂😂 got to love the old beaters.. Woooh that single jingle was hot literally 👍👍😂😂😂😂😂

[@gothicpagan.666]

Just a hint. If you just clamp the return pipe from the regulator with some vice grips, when under load on the dyno, you should see the pressure go up. If not the pump has ran out of flow capacity. If your read this hope it helps👌

[@-DEATHSTROKE]

15:30 sneaky little hole in the manifold

[@backyardbuiltgot4016]

Once I get my car done I'mma drive from Oregon to get my car tuned by you guys love the content

[@boostedblowngarage]

Always gotta love the single jingles!! #letsgo

[@timothymilam732]

Use bigger rock in your potholes, and sakrete to level it off. Not permanent fix, but it'll get you cheap fix until better weather, and things in general get back to normal around the country. Stay well n be safe.

[@lerrynhawke3375]

Yeah shawns back in da house!!

[@tonyoneeyewoods]

You boys sure know your stuff well done 👍🇬🇧

[@barra245t2]

Jamie:have you got that flashlight Brent:there was a time. #BRINGBACKTHETORCHTODD

[@bustacap3791]

lol the corner bead spray for the dino ehh? that stuff must work like crazy!

[@beefysghost867]

384k on the body wow! Also brent i emailed the shop about remote tuning havent heard anything back yet.

[@ardillasecreta]

Waiting for Haydens comments on the collector heat...considering he was explaining that when he built the manifold for the Rowdessey recently!!

[@beholder8467]

Loving these videos lately, stay safe guys.

[@andrewbartleman9169]

You need a skid steer and a load of gravel at all times. But first bring down the high areas with a grader box or toothed bucket. So everything is even to start. It could be useful to have a skid steer around too

[@andrewmurray6772]

Those Ram horns look insane, yeewww !

[@shanewright6958]

Great job guys 👍👍🇨🇱

[@jaredrobinson3072]

Wo wo wo wo! Tell me about this green flash light 😂😂.and stay healthy and safe x

[@LatvianVideo]

9:47 didnt expect a SSD, but i have the same ssd but 120GB version, its great for the price

[@evanlewis2095]

I can't wait I'm doing the exact same build probably gonna avoid a ram horn after watching this but 300hp is more than enough

[@MafiaboysWorld]

Thing learned for today Brent: USDM Del Sol's having an 8000rpm tacho. The ones here in Australia have a 9000rpm tacho but they have the B16A in them stock. 👍

[@upnorthviking823]

We have the sir b16 stock here canada.while the us got si dohc as sir and single cam si

[@nickclashez]

Thumbs up 👍🏻 and a comment funking love single cam content

[@boostjunkie2320]

I love seeing a single cam make power!!

[@blazegunner2385]

That gurgling hose is the radiator overflow tank not the fuel return. That equals head lift gonna need new headgasket soon lol

[@carlkaleinikas2202]

On the pot holes my guy you have to dig them deeper first thin make shore there is no Warter in them then fill and compact road planings is fine man

[@tatmanco]

Have a grader cut through the top 4-5 inches and regrade it then have it rolled and maybe a little road base to firm it all up

[@jimmytweedale2191]

Those bad boys were glllooooooowwwiinnn!!!!!

[@ItsTheFry]

#PFIBOIZ stay healthy guys!

[@hegeliandetective1034]

About had a heart attack when that hose return-spring wasn't immediate, when it swung by the NSX :P

[@goldfishninja8086]

That manifold is done. Cracked

[@802Garage]

Oh eyyy Bey Tek is a boss! Good looks.

[@ryaneddy366]

That's awesome with the parent name combo middle name, my daughter is the sam with Rylin, Ryan and Lindsay

[@joshymedina3885]

I love the black front end and doors and the rest white look nice AF

[@HassanEido1]

Sam is adorable God bless her

[@GermanEliteTuning]

Hell yah. That’s the best way to endurance test a manifold. 🤘🏻

[@dickbeninya708]

21:44 look at the top of merge collector, flames escaping, failing already

[@troydavies3225]

Matthew McFadden seen that to aye good eyes

[@elonmust7470]

Wouldn't the flames come during full boost instead of afterwards?

[@dannyb20vtec28]

I bet that manifold would benefit from a ceramic coating and a heat wrap job on it. Maybe reduce some of the temps.. just a thought. Thumbs up

[@jaredthisdelle5617]

Brent you need to get a front fender for her car .....

[@beany1987]

Anyone else noticed how clear the skies have been since we went to lockdown 🤔🤔

[@smileyguyz]

yeah, less pollution. goes to show we *can* make a difference if we try

[@801bear5]

Too bad it'll go to shit once people come out again.

[@eriklarson9137]

If you live where that is true, you should move.

[@beany1987]

@@eriklarson9137 I live in Wales very little pollution here if that's what you were referring, it's was more the fact that's there's barely been any clouds and weather has been unusually calm.

[@Johnny-tq9no]

@@beany1987 there's still a shit on of pollution there don't pretend that pollution from other areas doesn't affect you

[@Y2daT420]

Have u considered crushed cement for the lot. . Its generally cheap and gets hard like cement after it gets wet and drys out again.

[@krazyd27]

Leaking exhaust manifold at 15:26. Shooting a flame through welds

[@22bnightrider]

Make sure you can get into Florida I'm from Georgia and have been told no one is being allowed in or out of the state don't quote me on that but I would check

[@kevinhedgecock5046]

Call a concrete producer like ST Wooten of Ready Mix or something and see if any of them sell crushed concrete.....that's dirt cheap and makes a GREAT base for asphalt.....Just dont cheap out and only use it by itsself to fill in potholes and low spots because it still has active cement in it and will ruin your cars and customers cars paint jobs if you don't wash off the dust/mud.....so just as a base before placing asphalt but not to fill in the potholes.

[@tanksnjeeps]

We need some Sho'Nuff for the quarantine blues

[@brandonishere7166]

To fix those holes you need a backhoe or bobcat, need to scrape the holes down till they are even, and flatten everything around it same height. Put down gravel and your set.

[@pFbSpecV]

That del sol made some JAM!! Jamie srt4 is coming along also!

[@adamtheninjasmith2985]

Wow if I had known an ssd would help out with the dyno laptop I would have sent one forever ago!

[@MariosEvoCy]

Some nice videos and good work from you guys. Your greatest work though is shown through your kids Brent, enjoy your family and may God keep an eye on them. In regards to the crx, since fuel pressure is not dropping, although it should have been around the 80psi mark with 58psi static flow rate and 25psi boost, and since you do not get to see lean afrs up top without being able to correct them, then the injectors indeed do not flow as they should for 1000cc, as hp vs inj duty does not match.

[@dylanrohrich1108]

Huge go kart guy. What's with the honda odyssey/pilot FL250/350. I'd love to see content on it

[@Scottmangrum]

Boosted Boiz channel covers the odyssey.

[@beereadyyy9849]

@@Scottmangrum Hes not talking about the mini van bud

[@eddylorenzo5033]

I'm all for covid safety and im proud of u for promoting it because it is a serious issue

[@cory0702]

This is unbelievable what you get out of these engines.