ALL NEW! Car Hauler Auto Race Trailer 1/25 Scale Model Kit Build How To Assemble Paint Weather Decal

[@fabiobonilla3199]

Like so much this build!!. Thanks!!.👍🏼👍🏼👍🏼👍🏼

[@JohnW1711stock]

Nice!!

[@douglasmitchell5033]

Very nice build. I might use sheet styrene and make the front taller by 1/4"

[@r.a.monigold9789]

As a trailer fan, I followed this build - with no hitches at all. I like the mixed decal sheets - really personalized the rig. TWO in ONE is very practical as well. Thanks for the build and Thanks for sharing...

[@marcosfernandeznanita7150]

Got more ne a few weeks back and I want another for a future project 😊

[@edwardhood6252]

It's my opinion that there are not enough " single car flat beds " available, so now that there is this one, and it's a very nice looking trailer, I'll be getting two or three copies of it for my collection.

[@MegaKLOWNIE]

nice job on this kit chris now working on AMT AND REVELL TRAILER KITS. WITH NO SPRAY BOOTH TRYING TO GETMOST OF THESE KITS DONE BEFORE WINTER SETS IN SPRAYING OUTSIDE WITH THE RATTLE CANS.OVER 40 KITS IN MY COLLECTION.AND ON A FIXED INCOME MAKES IT TUFF TO GET A BOOTH FOR INSIDE DO THIS GREAT HOBBY FOR THE PAST 63 YRS AND STILL LOVING IT. GREAT VIDEOS YOUR DOING ALWAYS LEARNING SOMETHING NEW FROM YOU.

[@glusnifr]

great build..can you put the tire holder below the first tire holder ?

[@garyjust.johnson1436]

Nice! That is a good way to display two models without taking up a lot of shelf space!

[@B0bsUrUncle]

I just keep watching your videos. Any chance the double wheel setup and trailer could be used with the back of a racers wedge?

[@hehs3469]

YES !! THE 12 CAR GOES PERFECT ON THE TRAILER , LET'S GO TO THE ROUND D ROUND TONIGHT , DEVIL'S BOWL SPEEDWAY , MESQUITE , TEXAS , A TRUE 1/ 2 MILE !! 🤓❤️ , THANX CHRIS ❤️

[@THROTTLEPOWER]

You can never have too car trailers!!!! 🙂 I just bought mine yesterday.👍

[@user-nj8tz5en7k]

The AUTO TRAILER logo, looks like MATCHBOX logo colours!

[@modelrestorations]

Thanks for another Amazing build and review! I really like the wheel stops.

[@thomassmolenski2600]

Very nice build

[@thomassmolenski2600]

Could be the old Revelle trailer that came with the Chevrolet Van?

[@hpiguy]

This is an all new kit like I discuss. Thanks!

[@hotwhelrob]

You really motivate my building Chris. Thank you for all the video's. Great work again!

[@LarrysModelShop]

Very nice kit and it looks like it built up very nice.

[@flyingfortressrc1794]

Now if someone would come out with a Dirt Late Model kit we'd be all set. Lol That looks a lot like our old trailer. Definitely looks like a great build. I definitely want one. 😁

[@user-cv9rh7gh1n]

What is the best glue to use on this?

[@maryfiltz800]

Different trailer - looks nice when you put your car on it. Thanks.

[@nielschristianwithmller138]

Great build again, Chris 👍

[@doublenickelbob]

Great video Chris keep em coming I'll keep watching

[@craigwellsjr3968]

Looks awesome, as always.

[@johngligo4049]

Love that trailer! Good work!

[@richardmanchester114]

Hey hpiguys, so I honestly Love watching all of your videos!!!! Cause I always pausing the video and looking up the actual model kit that you're building in the video, and then basically end up ordering the same kit, or saving it in my carriage so that at the end of the week on payday, I usually end up ordering the kit!!! Thanks to you showing how good the kit is and then building the kit!!! So just keep being you and doing what you're doing building these kits!!!! Cause I love watching your videos, they're just relaxing and I get to see how the hole kit basically looks!!!!!

[@hpiguy]

Thanks a bunch!

[@ronaldhuff635]

That is a very nice kit, i recently bought four 53 ford and race trailer kits to get the trailers, wish i had seen this first, wont use all i have, but will have nice trailers for what i wanted to do, may have to buy one or two

[@jayo3865]

How can you change the jacks on the trailer if there's a piece of styrene on the bottom of the jacks?

[@michaelcooke2559]

Very nice kit, and build. Another trailer to choose from is always welcomed. The two tire racks is definitely great. Thanks for sharing.

[@lylebriggs923]

Nice quick eazy build video Cris I'm going to have to order 1 an thanks for the time you put in for us 👍👍

[@_Hurricane495]

As always another great video, I love how you put the car on there!

[@davidhinkson8856]

This is a very nice kit - I like the way the instructions are laid out and the decals for the lighting and so on. Would look really good hauling some of those racing cars you've built over the years behind one of the pick up kits.

[@openexhaustmodels5139]

Very nice mate👍

[@guidorea8347]

That would look good behind a Revell '66 Malibu wagon.....🤔

[@guidorea8347]

I gotta get me some!🙂

[@Mr74145]

That trailer reminds me of the trailer behind the motor home in Bruster's dusen .

[@jeffhower8566]

Looks almost like the old Revell kit

[@donsavignano4396]

Hey Chris, I was on the fence about buying this kit, and after watching the video I decided to buy one. Do you think that some model company might release a diecast or styrene model of Ron Capps throwback of Don the snake Prudhomme hot wheels Napa Toyota supra funny car which he debuted and raced at the u.s. nationals at Indy labor day weekend? Thx, Don

[@Myl9n9]

Does a 1/24 car fits on this trailer?

[@hpiguy]

Yes the Miller High Life stock car in the final pictures is 1/24th scale.

[@danielpaulsness6951]

Nice 😅

[@vickiluckett1251]

How much are them

[@jamesmcgowen1769]

The 2nd tire rack makes the model car a dangerous load with the model car mounted too far rearward introducing trailer sway at highway speed! Nice build Chris 😊

[@Jesus_Advocate41]

Wish you would cover Salvinos JR kits

[@IamGalvatron]

Ummm…

[@purpurahaze9179]

He has built several on the channel

[@shawntripp9380]

Hi Chris was just wondering… how long do you wait for primer to dry before you put topcoat on things like engines and interior and chassis

[@justinmyslive4108]

They need to make a dually pickup kit to put that trailer behind

[@dblducecreations]

AMT has the 96 C3500 Dually promo that might work for you. That's what I'm going to use. Great video! Thanks Chris!

[@justinmyslive4108]

@@dblducecreations I believe that's a curbside kit.I'm really not a big fan of curbsides

[@Rwalt61]

I'd love to get either the C3500 dually kit or the F F350 dually kit as an excuse to use one of my resin 5.9 Cummins kit and make an engine swap and put this trailer behind it.

[@kevinsmith7697]

Monogram early 90 s ford f-250 is probably what would work great! Built that several times! Nice kit!🤔✌️😎🇺🇸

[@justinmyslive4108]

@@kevinsmith7697 I know exactly the kit you're talking about. I used to have it. If my memory serves me correctly that was a 1:24 scale kit

[@user-ms4ie1zl1i]

I AM JESUS CHRIST WORSHIP ME. I AM GOD WORSHIP ME.

[@jetsons101]

Just went on second break and guess what I found? A new Hpiguys Workshop video just for me...................................... LOL

[@dougmulle2627]

I really don't like you Chris! It's bad enough that now i want to buy the trailer. Then i have to buy something to pull it. Then a third kit to put on it!! 😂🤣🤪