ALL THINGS THEY DON'T TELL YOU ABOUT THIS CONTROLLER !! CONNECT TO IOS, AND MORE !! - Gamesir X4a

[@sirtanjung35p]

3D File (STL) Grip Connector (rubber pads compatible) : bit.ly/X4aGripConnectorRubberPads Grip Connector (Gamesir original (not suitable with rubber pads)) : bit.ly/X4aGripConnectorOriginalGamesir Clip Extender (suitable for thin) : bit.ly/X4aClipExtenderThin Clip Extender (medium thickness) : bit.ly/X4aClipExtenderThicker Material i use and recommended material : 05:57 It's kinda hard to get this file because they put it on baidu platform which i have to again struggle to make an account for to get the file. Show some love guys don't fight each other ❤❤❤❤

[@SaucerX]

I checked both grip connectors on an STL viewr and they axctually look the same, what's the difference?

[@sirtanjung35p]

@@SaucerX yes they both are actually the same, the difference is that the theres room for rubber pad for the "rubber pad compatible" file, so you can use the grip connector while you have the rubber pad attached to the pad of the controller (the rubber pad is used for phones with thinner camera or to balance the thickness of the camera bump so there will be no wobbly thing) and for the "original gamesir" you can't use the rubber pad while using this grip connector. this is the original file that gamesir published on their official bilibili account

[@SaucerX]

@@sirtanjung35p got it! I was thinking of actual rubber bands, not the pads, that's where i got confused

[@GabrielRoma]

thanks. nakahanap din ng 3d file hahah.

[@aaronlufcy5931]

@@sirtanjung35p I'm not seeing this. The meshes look exactly the same, and I can't use the "rubber pad compatible" file with the rubber pads on

[@gustavorivera9545]

You are the only one that explain the 3 modes of connectivity

[@juaninzunza4457]

OMG, I have had this controller for at least three months and I didn't know about this

[@sirtanjung35p]

@@juaninzunza4457 glad you found this video! Better late than never 🔥🔥

[@gregorybolivar5712]

Indeed... Great Content Details Video.... Best Fit for the: X-4 Aileron Bluetooth controller is RazeR Edge 6.8" Tablet And PimaX PortaL 5" Tablet Both don't have camera bumps... And slightly wider than the Samsung S23 with or without case... Look it up... 🤓🧐🤯🙃🔥👍

[@Ez_Diamond69]

In conclusion, it can be played on iPhone.

[@juaninzunza4457]

Not to mention you can also add a phone cooler and with a 90 degree USB adapter you can also charge the phone with the controller placed on the phone, it is almost perfect.

[@Ez_Diamond69]

This video is very useful. I can connect to my iPhone. But is it possible to change the light color through the app?

[@sirtanjung35p]

@@Ez_Diamond69 you can change the RGB colour in the app but for the mode you have to change it by yourself by button combination

[@Ez_Diamond69]

@@sirtanjung35p Can you teach me? Change the light color yourself

[@sirtanjung35p]

​@@Ez_Diamond69please check 02:31 and watch it carefully and try it

[@mmhck]

You saved my day! For everyone: make sure both grips are synced. For that, interlock the controls and connect usb c powere. The controllers should have a color synced and not white still with red sometimes.

[@MasOc3k]

So.. when we connect this controller to PC using bluetooth, it recognised as XBOx controller right? please answer..

[@sirtanjung35p]

Yes, the Blue Mode and Joycon Mode will work on PC

[@MasOc3k]

@@sirtanjung35p So I can play Steam Game using this controller, just switch to Blue mode and Connect to PC, then just play a PC game right? Thanks for advance

[@sirtanjung35p]

You're right!!

[@xeriogomez6768]

In joy con mode, can u play a game, using them both for right and left hand, just as you would with them attachedvto your phone, or connected together?? Or only they work then as separated joy cons for 2 different playera each? Tx

[@sirtanjung35p]

For a use without having it to attached to a phone - you have to use "Force Power" mode which you can read in the user manual. Long press the xbox button until it turns on and also long press the "share" button for the right grip, it will automatically pair together and will act as one controller

[@xeriogomez6768]

U can use them then 1. By Ur phone sides attached, 2. As gamepad, connected together L+R, stand alone dettached from ur mobile, 3. As 2 separated controllers, as explained therein, 1 side to use for 2 different players each, 4. AND!!!then again, joy con mode, when u hold the two sides, L and R dettached one from another, in ur left, and the other side in ur right hand, right?? TY

[@Ez_Diamond69]

If anyone has tried this, please tell me.

[@alvaro7597]

Hello, I bought the gamesir x4A controller. I have followed the configuration steps in the application and when I try to play Genshin Impact, if I have the controller connected I cannot use the touch screen. The controller also doesn't do anything if I touch the buttons, and I already have the actions for each button within the game selected. I don't know why it doesn't work

[@sirtanjung35p]

@@alvaro7597 have you turned on Wireless Debugging settings and the security limiter? Or if it's still doesn't work please join the Gamesir discord server, the official staff will help you, you might get a defect/abnormal unit.

[@alvaro7597]

@@sirtanjung35p Yes, i have 😞

[@n.k.3238]

Great and excellent Solution. many thanks

[@iKugel]

thanks we all knew that. hopefullly it wont change because of videos like that....................

[@AjayThakor-qn2tr]

That's cool features that manufacturers dont tell u.

[@Devilhunters32]

will this work on smaller phones like xperia 5 since the clip needs to raise up to power on

[@sirtanjung35p]

@@Devilhunters32 it should work still but if its too thick i doubt it can fits. You can use "Force Power" mode if the clamp is not raised enough to trigger automatic power on

[@Devilhunters32]

@@sirtanjung35p yea quite a hassle to power them both. Can You confirm if it could fit small phones?

[@sirtanjung35p]

@@Devilhunters32 you can watch my recent videos about IOS gameplay, i use the iPhone 14 which i think is quite small

[@elion8422]

You're the Boss Bro👊

[@Angelo136.]

Does It work on xbox with brook wingman converter?

[@sirtanjung35p]

I believe it's not possible to connect it to XBOX console, because someone have tried it and they say it doesn't connect using anything (wireless & wired) but it works on Xbox Cloud Gaming. About wingman converter... I have no idea and never heard of it, i might try to find the answer and deliver it on my next video! Thank you!

[@yen2481]

What other games I can play for joycon mode using ppsspp emulator? Any suggestions please. Thank you.😀

[@sirtanjung35p]

@@yen2481 i don't think you can play any psp games using 2 controller, i think what you mentioned is ps2 games, the game i showed using the joycon mode is Metal Slug and i played it on ps2 emulator, there's so many games and potential for using the joycon mode for example you can play local co-op PC games "Overcooked" or "Moving Out!", basically every games that requires 2 controller to play as 2 player and using basic button input You can search for "Local Co-op video games" on the internet or KZbin, also try to add "Mobile" or "PC" to specify on what device you will be playing on. Please mind checking out the latest video i posted! Also there will be a bunch of various gameplay soon! So stay tuned! Thank you!

[@yen2481]

@@sirtanjung35p sorry, I mean ps2 games. Looking forward to your new videos. Thank you for sharing.

[@ruchan_kaan]

Mate, thank you so much for this. I've seeen many videos about this device and none of them as helpfull as this one. You're a true hero!

[@ruchan_kaan]

@Sir Tanjung, i've a question. I've printed the one at 05:58 with PLA as you recommended. But when I use it, i cant put it in when green clamps open. As I know, it must be open for device start to work. Am I missing something? Thx again.

[@sirtanjung35p]

​@@ruchan_kaanHi! I think you just have to slide it in and the clamp will automatically raise and the controller will turn on. And also the PLA material is recommended by the file author, so I haven't try the PLA material yet

[@LALO07_69]

Thanks 👍🏻

[@pauliu846]

I almost throw it away, thanks for the information, even the seller didn’t tell me about this, he just said not for iOS .

[@Oakich]

man, thanks for this!!!

[@walruss-4069]

Hello does the Joycon mode have trigger buttons to map or enough space to map for a full controller?

[@sirtanjung35p]

Sadly no, i have tested it and you probably will be missing 2 buttons which for example for the Right Grip you will be missing the LB & LT button, in some case the LB will still work using the "M" button if i remember

[@walruss-4069]

@@sirtanjung35p damn that really sucks but thanks for the quick response

[@sirtanjung35p]

@@walruss-4069 i haven't try to map the Back button for the LT that's missing. i will try in the upcoming video about detailed joycon mode review

[@walruss-4069]

@@sirtanjung35p ok looking forward to it

[@ZHIGZAGON-]

How wobbly is the controller with the s23 ultra with a slim case?

[@sirtanjung35p]

@@ZHIGZAGON- you can try a different slim case if it's wobbly with your current case, I believe the controller must be used without a case but if a case can fit - it will be an extra thing

[@Prismo-y6r]

Queda a la perfeccion con un case delgado,parece que fue diseñado para en samsung s22,23,24 con case por lo firme que queda, pero en juegos exigentes le reduce el rendimiento por el calor acumulado.

[@VendettaSfco]

Lo uso en mi S22 ultra con el Niilkin case que tiene ventana para la cámara. Es un ajuste perfecto y para el calor he pedido de Aliexpress un cooler simple con batería Fs01. Espero que le haga, dicen que es pequeño.

[@PetersonFerreira117]

Nice video! Nice Tutorial! Nice tips! Thanks for sharing.

[@laotraversion359]

Alguno de estos midos de bluetooth es comoatible con PS REMOTE PLAY como el gamesir G8 Galileo.

[@emmanmendoza9845]

Thank you so much. Finally different bluetooth mode

[@marcclentonramos7350]

Can you please create video while playing call of duty mobile and psp emulator gemes on iPhone .i just want to make sure this really works with iPhone before buying it. Sorry if this is a lot but this will be really helpful for iPhone users since we can attach phone coolers at the back to combat heat issues. Thanks and GOD bless

[@sirtanjung35p]

@@marcclentonramos7350 yes i will do full length gameplay exclusively for IOS. Please subscribe and turn the notification so you can tune the video when it's uploaded 🙏🔥🔥

[@encikmeor]

After active the joy con mode, i cannot pair back the two controllers. How to connect back?

[@sirtanjung35p]

@@encikmeor just reactivate the controller, pull the clamp till the controller is off. And then just turn it on like usual

[@marcclentonramos7350]

Using blue mode,. Can you play HOK, mobile legends and CODM Using iPhone?

[@sirtanjung35p]

@@marcclentonramos7350 with blue mode you can play mobile games that can natively work with controller, for example here Minecraft and CODM. to play HOK & MLBB you must use the V-Touch feature which you must keymap each button to the in game button, but this is not possible on IOS because IOS doesn't allowed it to do that

[@bassderek]

Amazing! I couldn't find this info anywhere - now I can use it with iOS.

[@sirtanjung35p]

@@bassderek glad i could help! please check out the latest video i posted! full gameplay on IOS device 🔥🔥 enjoy!

[@mclervins7517]

this video is very useful , cheers for you 🎉

[@2Hard2Name]

Can you answer me some questions? 1. Is this controller polling rate 250hz when connected to pc? 2. Can this controller connect to pc wired? 3. When connected to pc it show (XInput standard gamepad) or (standard gampad) Thanks for this informative video.

[@sirtanjung35p]

Here is some answer i can provide related to your question 1. When connected to PC via Bluetooth using "Blue" mode, the polling rate is 125hz maximum 2. No, but it still can connect via bluetooth while charging it using the type-C cable 3. When using the "Blue" mode it will be recognized as Xbox Series X Controller or we can say X-Input. Meanwhile if using the "White" mode which the default mode it will not work properly since the layout is neither X-Input nor D-Input. This is why you must use the "Blue" mode if you wants to play on PC or IOS. About the latency (bluetooth connection) here's my tests Min : 6.38ms Avg : 8.26ms Let me know if you got more question about this controller. Thank you!

[@2Hard2Name]

@@sirtanjung35p Yes I have some more questions: 1. Does X4A have rumbles? 2. Can it play gow(IIRC some controllers can't be used to play gow)? 3. How long does it last from full charge?

[@sirtanjung35p]

@@2Hard2Name 1. No, it does not have a motor rumble feature 2. After some quick research, i found that there's some GOW series that only support Xbox controller, so in this case the Gamesir X4a will work perfectly fine, even if my research is incorrect there is still a way to fix this issue for example using the DS4Windows software. 3. For me i rarely charge it. I'm pretty sure you don't have to worry about the battery. Just charge it using a low power adaptor to avoid battery damage or reducing its health

[@2Hard2Name]

@@sirtanjung35p Thank you for the information sir. 🥰

[@alcaedataliban9306]

v.2 grip from bilibili has button up,down to charge and discharge joystick do you have 3d print file

[@sirtanjung35p]

@@alcaedataliban9306 sadly i don't have it, because the file is not for public. They sell it on chinese e-commerce (not the file but the finished product)

[@us-dr1yd]

What is the link for it?

[@sirtanjung35p]

I will share the link on the upcoming videos, be sure to subscribe and hit the bell notification so you don't miss out when its ready!

[@tice170]

Wow!!!!!

[@fikrispensix7194]

mantap bang

[@yapweikeat115]

Hi i still cant connect to iphone, any solution?

[@sirtanjung35p]

Make sure the LED indicator is on Blue and then look up on your Bluetooth settings it should appear as Xbox Wireless Controller.

[@sirtanjung35p]

Check on 2:10 make sure you do it like what i did

[@Ez_Diamond69]

Please help me, I can't find Bluetooth.

[@sirtanjung35p]

@@Ez_Diamond69 yes, please join the Gamesir official discord server and head to Gamesir X4a subforum

[@Ez_Diamond69]

@@sirtanjung35pมีลิ้งไหม ฉันหาgamesirx4aไม่เจอ

[@pssyslyrr6074]

Doesnt work from me, only white mode is working

[@sirtanjung35p]

@@pssyslyrr6074 you can switch to Blue Mode to play Native controller video games that support it (example, Minecraft) , meanwhile pretty sure you can't use the V-Touch feature for it (example for playing PUBGM or MLBB)

[@pssyslyrr6074]

@@sirtanjung35p I able to use blue mode now, still finding out how to turn on Joycon mode sir

[@pssyslyrr6074]

@@sirtanjung35p already figured it out all modes sir, thank you for this video!!!

[@GameBrainerz]

Nice Bro #GameBrainz

[@jeliason17]

Does it work with ps5 remote play?

[@sirtanjung35p]

@@jeliason17 i believe it will works because when using the Blue Mode, it will be registered as Xbox Wireless Controller

[@muratmurat3313]

Gute Idee mit grip converter